SATECHI Slim X2 Bluetooth Backlit Keyboard User Manual
- June 4, 2024
- SATECHI
Table of Contents
SATECHI Slim X2 Bluetooth Backlit Keyboard
PACKAGING CONTENT
- SLIM X2 BLUETOOTH BACKLIT KEYBOARD
- USB-C CHARGING CABLE
- USER MANUAL
SPECIFICATIONS
- MODEL ST-BTSX2M
- DIMENSIONS 14.29″ x 4.5″ x 0.47″
- WEIGHT 0.83 lbs
- WIRELEsS CONNECTIVITY Bluetooth
SYSTEM REQUIREMENTS
- BLUETOOTH VERSION 3.0 or later
- MACOSX v10.4 or later
- OS 13& ABOVE Bluetooth enabled
FUNCTIONS
Note: The keyboard layout function is based on i0S and MAC OS defaut settings. The output might differ for different OS.
- ON/OFF SWITCH
- POWER/CHARGING LED INDICATOR
- FN LOCK LED INDICATOR
- Bluetooth DEVICE KEYS WITH LED INDICATOR
- USB-C CHARGING PORT
- MEDIA / FUNCTION KEYS
- CAPS LOCK LED INDICATOR
- FN KEY
- number pad
ON/OFF
- To turn the Keyboard on or off, move the switch on the top of the device to the “on” position. The power indicator turns green for~3 seconds and then turns off.
PAIRING YOUR DEVICES
- Press and hold one of Bluetooth Keys for ~3 seconds to assign a device to White LED Light stould start Blinking.
- On the host device, look for “Slim X2 Keyboard “in the Bluetooth Setting, choose “Connect” to pair. The white LED will stop blinking, indicating a successful pairing. Repeat process to add up to 4 Bluetooth devices.
Note:
- After 30 minutes of non-operation, the keyboard will go to sleep mode. Please press any key to wake up.
- Quickly switch between 1, 2, 3 and 4 to switch devices.
- For buttons F1 ~ F15 press the “Fn” key with the key to enable the function.
LED indicators
- On/Off- turns green for 4s and turns off.
- Low Battery – flashes green when it’s low battery.
- Charging – turns red when it’s charging.
- Fully Charged- turns green and stays green.
- Pressn to swap between Media keys and F-Keys. The white LED light gets brighter indicating FN lock is enabled.
BACKLIT
- There are 10 backlight levels.You can change the backlight levels at any time by pressing
Note: The backlit turns off when the keyboard battery is low.
CHARGING YOUR KEYBOARD
- When the battery is low, the power indicator will flash green. Connect the keyboard to a computer or USB wall adapter using the included USB-C charging cable.
- Charge the keyboard for 2 to 3 hours, or until the red charging LED light turns green. The keyboard can be used either wired or wirelessly while charging.
Press Fn+ activate the wired mode when USB-C cable is connected.
The power LED light turns green. Press 1~4 button to switch back to Bluetooth
mode.
HOT KEY FUNCTION & SUPPORT TABLE:
MAC OS FUNCTION iOS FUNCTION
| Decrease Display Brightness| Decrease Brightness
---|---|---
| Increase Display Brightness| Increase Brightness
| Spotlight Search| Spotlight Search
| App Switcher| App Switcher (iPad only)
| Decrease Keyboard Backlight| Decrease Keyboard Backlight
| Increase Keyboard Backlight| Increase Keyboard Backlight
| Previous Track| Previous Track
| Play/ Pause| Play/ Pause
| Next Tr a ck| Next Track
| Mute| Mute
| Volume Down| Volume Down
---|---|---
| Volume Up| Volume Up
| Eject| Activate Virtual Keyboard
| Fn Lock| Fn Lock
| Clear| Clear
Safety Instruction
Warning: Fire, electric shock, damage to keyboard device could occur if the following instructions are not obeyed
- Keep away from microwave radiation source
- Do not place heavy objects on this product
- No dropping and bending
- Keep away from oil, chemical, or organic solvents
FAQS
Can I use this as a wired keyboard?
A: Yes, the Slim X2 Keyboard includes USB wired connectivity. Pressing the
“FN+EJECT keys will activate the USB wired mode for the keyboard.
How do l pair with Windows 10?
A: You need to pair through Control Panel and not Bluetooth Settings.
Does the keyboard come with different color light options?
A: Unfortunately, the keyboard is only equipped with a white backlight.
However, you are able to cycle through 10 different brightness options,
How long does the battery last on a full charge?
A: The battery life of the keyboard can vary depending on the level of the
backlight brightness but the longest the keyboard can last on a full charge is
approximately 80 hours.
Why did my keyboard backlight dim/turn off automatically?
A: The backlight will automaticaly dim after one minute of non-usage, It will
also turn off automatically once it reaches low-power mode. (Green flashing
LED = LOw-Power Mode).
FC
This device complies with part 15 of the FCC results.
Operation is subject to the following two conditions:
- This device may not cause harmful interference and
- This device must accept any interterence received, including interference that may cause undesired operation.
Note: This Equipment has been tested and found to comply with the limits
fora class B digital device, pursuant to Part 15 of the Federal Communications
Commission (FCC) rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmtul
interterence to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into and outlet on a circuit different from that to which the receiver connected
- Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the manufacturer could void the user’s authority operate the equipment.
CE DECLARATION OF CONFORMITY
Satechi declares that this product is in compliance with the essential
requirements and other relevant provisions of applicable EC directives. For
Europe, a copy of the Declaration of Conformity for this product may be
obtained by visiting www.satechi.net/doc