RANEIN 4.3 GPM Natural Gas Tankless Water Heater User Guide
- June 15, 2024
- Ranein
Table of Contents
RANEIN 4.3 GPM Natural Gas Tankless Water Heater
Instantaneous water/gas flow query ****
When running, press and hold the “function key” for 3 seconds to query the
instantaneous water flow, then the icon “water flow L/min” lights up, no
opera-tion within 5 seconds automatically exit;
Within 5 seconds, press the “function key” again, turn to query the instanta- neous gas flow, then the icon “water flow m3/h” is lit, no operation within 5 seconds.
Cumulative water/gas flow query:
Stop running, press and hold the “function key” for 3 seconds to query the
instantaneous water flow, then the icon “water flow L/min” lights up, no
opera-tion within 5 seconds automatically exit;
Within
Within 5 seconds, press the “function key” again, turn to query the instanta- neous gas flow, then the icon “water flow m3/h” is lit, no operation within 5 seconds.
Four seasons temperature function
Touch the function button to select the four-season temperature icon to enter
the mode, the control system will automatically match the water temperature
according to the inlet water temperature, at this time can not manually adjust
the temperature, you need to click this button to close the intelligent bath
function before you can manually adjust the temperature. Automatic match-ing
temperature is as follows.
- Inlet water temperature <15°C, match the outlet water temperature to 45°C;
- Inlet water temperature 16°C-21°C, matching the outlet water temperature of 43°C;
- Inlet water temperature 22°C-27°C, matching the outlet water temperature of 40°C;
- inlet water temperature 2 28°C, matching the outlet water temperature of 38°C.
Kitchen function:
Touch the function button to select the kitchen icon to enter the mode, select
this function after the temperature default is 38 ℃, short press the function
button again to select the rest of the function or adjust the temperature by
ascending and descending keys will exit this function.
Bathtub function:
Touch the function button to select the bathtub icon to enter the mode,
- A. Open the bathtub function after the icon “888” and “L” flashing display cor-responding to the water injection,
- B. Within 5 seconds, press the ascending and descending temperature keys to adjust the bathtub water injection, water injection adjustment range “50-800L”,
- C. Single adjustment to 50L change. After 5 seconds of no operation, the display temperature and according to the current setting of water injection began to run,
After the completion of the water injection buzzer long warning, after the
water off to lift.
At this time.
- ‘Touch the mold, After 5 seconds .and” “, to change the amount of water added.
- Touch the mold, addition ” ” and ” “, to change the temperature of the water
- Touch the mold again to exit.
High-temperature lock function
- 1. To prevent high-temperature water scalding, the machine is equipped with a high-temperature lock function, the machine running state when the need to set the water temperature above 50 ℃, you need to long press the tempera-ture key for 3 seconds to unlock, 5s after the completion of the adjustment automatically lock, lock the temperature can not rise after the setting, only down. If you need to continue to rise the temperature, you need to long press 3S to unlock, before you can rise to set. The whole process of setting down is not restricted.
- No high temperature lock function in standby mode.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>