TCB NKZS Light Bulb Camera 0929 Instruction Manual
- June 15, 2024
- TCB
Table of Contents
TCB NKZS Light Bulb Camera 0929
Specifications
- FCC Identifier: 2A53F-A16
- Name of Grantee: FeiMeiRen ZhiLian (Shenzhen) Technology Co., Ltd.
- Equipment Class: Digital Transmission System
Frequency Range and Output Watts
| FCC Rule Parts | Frequency Range (MHz) | Output Watts |
|---|---|---|
| 15C | 2412.0 – 2462.0 | 0.062373 |
| 15C | 2422.0 – 2452.0 | 0.057148 |
Frequency Tolerance
The device operates within the specified frequency range with a tolerance
level specified by the FCC.
Emission Designator
The emission designator identifies the type of modulation used by the
device for transmission.
Power Output
The power output listed is conducted, meaning it is measured at the output
terminals of the device.
Bandwidth Mode
This device has two bandwidth modes available – 20 MHz and 40 MHz.
Antenna Installation
The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons. The antenna(s) should
not be co-located or operated in conjunction with any other
transmitter.
RF Exposure Compliance
End-users and installers must be provided with antenna installation
instructions and transmitter operating conditions to ensure compliance with RF
exposure regulations.
Installation
- Select a suitable location for the device.
- Ensure the device is placed at least 20 cm away from any person.
- Connect the appropriate antenna(s) to the device following the provided installation instructions.
- Ensure the device is not co-located or operated together with any other transmitter.
Powering On
- Connect the power cable to the device’s power input port.
- Plug the power cable into a power outlet.
- Press the power button to turn on the device.
Configuration
- Access the device’s configuration interface through a web browser or dedicated software.
- Follow the provided user manual to configure the device according to your network settings and requirements.
- Save the configuration settings and restart the device if necessary.
Maintenance
- Regularly check the device and antenna(s) for any physical damage or loose connections.
- Clean the device and antenna(s) as recommended in the user manual.
- Keep the device firmware up to date by checking for and installing any available updates.
Troubleshooting
If you encounter any issues with the device, refer to the troubleshooting section of the user manual for possible solutions. If the problem persists, contact customer support for further assistance.
FAQ (Frequently Asked Questions)
Q: Can I use the device with any type of antenna?
A: No, you must use the antenna(s) provided with the device or antennas
recommended by the manufacturer to ensure compliance and optimal performance.
Q: What is the purpose of the two bandwidth modes?
A: The 20 MHz and 40 MHz bandwidth modes allow you to adjust the device’s
transmission capabilities based on your specific requirements and network
conditions.
Q: How often should I check for firmware updates?
A: It is recommended to regularly check for firmware updates and install them
as they become available. This ensures that your device has the latest
features, improvements, and security patches.
Q: What should I do if the device does not power on?
A: First, check if the power cable is securely connected to both the device
and the power outlet. If the problem persists, try using a different power
outlet or contact customer support for further assistance.
GRANT OF EQUIPMENT AUTHORIZATION
Certification
Issued Under the Authority of the Federal Communications Commission By:
- Compliance Testing, LLC
- 1724 S. Nevada Way
- Mesa, AZ 85204
- Date of Grant: 04/24/2022
- Application Dated: 04/24/2022
- FeiMeiRen ZhiLian (Shenzhen) Technology Co., Ltd.
- Building 34, Longjun Industrial Zone,
- Heping West Road, Longhua district Shenzhen
Attention : Jingfei Qin , Manager
NOT TRANSFERABLE EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE
and is VALID ONLY for the equipment identified hereon for use under the
Commission’s Rules and Regulations listed below.
FCC IDENTIFIER: 2A53F-A16
- Name of Grantee: FeiMeiRen ZhiLian (Shenzhen)
- Technology Co., Ltd.
- Equipment Class: Digital Transmission System
- Notes: Convenient Camera
Grant Notes
- FCC Rule Parts 15C 15C
- Frequency Range (MHZ) 2412.0 – 2462.0 2422.0 – 2452.0
Output Watts
- 0.062373 0.057148 Frequency Tolerance
- EmissionDesignator
The power output listed is conducted. This device has a 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End- users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>