MUSIC SOUND BTMSTWSINEAR Wireless Earphones Plus Power Case Instruction Manual

: June 4, 2024
: MUSIC SOUND

Table of Contents

BTMSTWSINEAR Wireless Earphones Plus Power Case
PRELIMINARY OPERATIONS
EARBUD TECHNICAL SPECIFICATIONS:
INFORMATION ON THE STATUTORY WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BTMSTWSINEAR Wireless Earphones Plus Power Case
Instruction Manual

BTMSTWSINEAR Wireless Earphones Plus Power Case

WIRELESS EARPHONES + POWER CASE
WIRELESS STEREO BLUETOOTH® HEADSET WITH CHARGING CASE
Description:

MFB touch control
LED
USB-C charging port
Led Charging Case
USB-C charging cable

PRELIMINARY OPERATIONS

CHARGE THE CHARGING CASE AND EARBUDS BEFORE SETTING UP FOR THE FIRST TIME.
PHONE CONNECTION: before connecting MUSIC SOUND to the phone, it is necessary to establish a connection between the two earbuds. Remove the individual earbuds from the charging dock. The LEDs (2) will begin to flash red/blue in an alternating fashion. The earbuds will connect with each other within a few seconds.
Once the connection has been established, the LED (2) on one of the earbuds will flash quickly, indicating that the pairing mode is active.
Turn on Bluetooth® on your phone to run a search for devices and select MUSIC SOUND when it is detected.
USE
To answer a call: you can answer calls from both earbuds by pressing the MFB touch control (1) once.
To end a call: you can end calls from both earbuds by pressing the touch control (1) once.
Voice assistant: the voice assistant can be activated from both earbuds by keeping the MFB touch control (1) pressed for 3 seconds.
Play/Pause: Press the MFB touch control (1) on one of the two earbuds once.
FF: press the MFB touch control (1) of the right earbud for about 2 seconds to fast forward to the next track.
Rew: press the MFB touch control (1) of the left earbud for about 2 seconds to rewind to the previous track.
Speaker volume control: press the MFB touch control (1) on the right earbud twice to increase the volume, and press the MFB touch control (1)on the left earbud twice to decrease the volume.
Flat battery indicator: if the LED flashes red, the battery is flat.
Charging the Charging Case: Charging Case has an internal battery that allows the earbuds to be recharged without being plugged in toa mains charger. The Charging Case must therefore be charged before recharging the batteries of the devices.
Connect the charging cable (5) to a USB port and connect the other end to the USB-C charging port (3); the blue LEDs (4) will gradually light up to show the charge level of the battery.
Once you have finished recharging, disconnect the Charging Case from the power supply.
Recharging the earbuds: insert the devices in their respective docks and close the Charging Case flap, charging will start automatically. The LED (2) lights up red when charging is in progress. The LED (2)lights up blue and then turns off when charging is complete.
RESET: if the device does not work properly, it is possible to carry out a reset to restore factory settings:
– Delete the pairing with the earbuds from the phone, turn off the Bluetooth® and reboot the phone.
– Switch off the earbuds by pressing down their touch controls until the red LEDs turn off.
– When the devices are turned off, continue pressing the touch controls, until the LEDs flash red 3 times. The earbuds will connect with each other.
Turn on Bluetooth® on your phone and select MUSIC SOUND when it is detected.

EARBUD TECHNICAL SPECIFICATIONS:

Bluetooth®: v5.1
Supported profiles: Headset – Handsfree – A2DP – AVRCP
Range: 10m
Bluetooth® Frequency Range: 2402-2480GHz
Battery voltage: 3.7-4.2V
Battery capacity: 40mAh X 2
Charging Case battery capacity: 400 mAh / 1.11Wh
Micro-USB port voltage (V): 5V
Micro-USB port current (A): 1A
Stand-by Time: 220 hours
Talk Time: 4.5 hours
Play Time: 4.5 hours
Charging the earbuds: approx. 1.5 hours
Charging the Charging Case: approx. 1.5 hrs
Weight: 46g

**** Cellularline S.p.A. declares that this Bluetooth headset with a charging case complies with Directive 2014/53/EU. The full text of the EU Declaration of conformity is available at the following Internet address: www.cellularline.com/_/declaration-of- conformity. Cellularline S.p.A. also declares that this Bluetooth headset with charging case complies with Directive 2011/65/EU updated from 2015/863/EU.

INFORMATION ON THE STATUTORY WARRANTY

Our products are covered by a statutory warranty against conformity defects in accordance with applicable national consumer protection laws.
For more information, please see the following page www.cellularline.com/_/warranty

INSTRUCTIONS FOR THE DISPOSAL OF DEVICES FOR DOMESTIC USE (Applicable in countries in the European Union and those with separate waste collection systems) This mark on the product or documentation indicates that this product must not be disposed of with other household waste at the end of its life. To avoid any damage to health or the environment due to improper disposal of waste, the user must separate this product from other types of waste and recycle it in a responsible manner to promote the sustainable reuse of the material resources. Domestic users should contact the dealer where they purchased the product or the local government office for all information regarding separate waste collection and recycling for this type of product. Corporate users should contact the supplier and verify the terms and conditions in the purchase contract. This product must not be disposed of along with other commercial waste. This product has a battery that cannot be replaced by the user. Do not attempt
to open the device to remove the battery as this could cause malfunctions and seriously damage the product. When disposing of the product, please contact the local waste disposal authority to remove the battery. The battery inside the device was designed to be able to be used during the entire life cycle of the product. For more information, visit the website http://www.cellularline.com
**** Using the device may, in some cases, interfere with the correct functioning of medical devices (e.g. pacemakers).
Prolonged exposure to high volume and prolonged use may cause permanent damage to hearing.
Do not use the device in places where being unable to hear external noises could prove dangerous (e.g. railway crossings, train platforms)
If used when driving, comply with the regulations in force in the relevant country.
Children should be supervised when using the device and all accessories and packaging should be kept out of their reach.
Do not expose the device for prolonged periods to damp, dust, soot, steam, direct sunlight, and excessively high or low temperatures, which could result in it malfunctioning
Use only suitable chargers for charging Regularly charge the product (at least once every 3 months).

Cllularline S.p.A
Via Lambrakis 1/A
42122 Reggio Emilia, Italy
www.cellularline.com