AUSHA Dual Band Wireless USB Adapter Installation Guide
- June 15, 2024
- AUSHA
Table of Contents
AUSHA Dual Band Wireless USB Adapter
Product Information
The Dual Band Wireless USB Adapter is a device that allows you to connect your computer to a wireless network. It supports Windows Vista, 7, 8, 8.1, 10, and MAC operating systems. The adapter is equipped with built-in driver software, making it easy to install and use.
Specifications
- System Support: Windows Vista/7/8/8.1/10/MAC
- USB Version: 2.0/3.0
- Wireless Bands: Dual Band
Product Usage Instructions
Windows OS Operating Instructions
Driver Installation
- Insert the USB wireless network card into an empty USB 2.0/3.0 port of your computer when the computer is switched on. If the card feels stuck, flip it over and try again, but do not use force.
- A message will appear on your computer, click “Cancel/Close”.
- If the driver does not install automatically, you have three options:
- Install the driver from the mini disc by following the steps above.
- If you do not have a CD player, you can install the driver automatically in Windows 7/8/8.1/10/XP. Open it on Windows Explorer, select the proper file for your system (Windows/Mac), double left-click on the setup.exe file, and follow the instructions to finish the installation.
- Download the driver via the online link: bit.ly/Auscoumer-600M. After obtaining the driver, the installation process is the same.
- Insert the driver CD into your CD-ROM drive and open the D drive. Select the proper file for your system (Windows/Mac).
- Double-click on the setup.exe file and follow the instructions to finish the installation.
- Once the installation is finished, you will be asked to reboot the computer. Click “Finish” and reboot the computer to complete the installation of driver files.
- Insert the USB wireless network card into a USB 2.0/3.0 port of your computer. The system will find the new hardware and automatically install the drivers. A new icon will appear near the clock of the system tray: “Connect to the Internet”.
- After finishing the driver installation, click adapter utility from your taskbar or programs folder. Click “Available Networks”, select the wireless access point you would like to connect to, and press the “Add to Profile” button.
- If there are any security requirements, fill in the security information and then click “OK” to connect to the wireless network.
- If connected successfully, it will show the status screen.
- Left-click the icon to launch the wireless network configuration utility, and right-click the icon to show the quick menu of the configuration utility.
FAQ
Q: What operating systems are supported by the Dual Band Wireless USB Adapter?
- A : The adapter supports Windows Vista, 7, 8, 8.1, 10, and MAC operating systems.
Q: How do I install the driver for the adapter?
- A: You can install the driver automatically by plugging in the adapter and allowing the system to install it. If it doesn’t install automatically, you can install it from the mini disc, open it through the built-in file of the dongle, or download the driver online from the provided link.
Q: How do I connect to a wireless network using the adapter?
- A: After installing the driver, open the adapter utility, click Available Networks”, select the desired wireless access point, and enter any required security information. Click “OK” to connect to the network.
Windows OS Operating Instructions
Driver Installation
Please follow the following instructions to install your new wireless USB Adapter:
- Insert the USB wireless network card into an empty USB 2.0/3.0 port of your computer when a computer is switched on. Never use force to insert the card, if you feel it’s stuck, flip the card over and try again.
- The following message will appear on your computer, click ‘Cancel / Close’.
Under Windows Vista and Windows 7
Tips:
- The adapter is built-in driver software. Generally, the driver will be installed automatically in win7 / 8 / 10 / XP, just plug and play, and enable your PC to connect to the WiFi.
- If you find it doesn’t install automatically
we also offer three ways to get the installation driver:
- You can install the driver from the mini disc(Just as demonstrated in the steps above)
- If you don’t have a CD player to read the driver. What can you do?
- The driver will install automatically in Windows 7/8/8.1/10/XP. If you plug it on and it looks like a disc drive and does not install it automatically, you can open it in Windows Explorer, select the proper file for your system “Windows/Mac”
- Double left-click on the “setup.exe” file and follow the directions to finish the installation, after that, it will work perfectly.
- Or download the driver via an online link Online driver link: bit.ly/Auscoumer-600M
- Whether you load the driver from CD-ROM, open the driver through the built-in file of the dongle, or download the driver online, after obtaining the driver, The following installation process is the same.
- Whether you load the driver from CD-ROM, open the driver through the built-in file of the dongle, or download the driver online, after obtaining the driver, The following installation process is the same.
- Insert the driver CD into your CD-ROM, and open the “D” drive. Select the proper file for your system “Windows/Mac”
- Double left-click on the setup.exe file and follow the directions to finish the installation
- Once the installation is finished the computer will be asked to reboot. you can click ‘Finish’ and reboot the computer to finish the installation of driver files
- Insert the USB wireless network card into a USB 2.0/3.0 port of your computer, and the system will find the new hardware and will install the drivers automatically.
- A new icon will appear near the clock of the system tray:
- Connect to the Internet:
- After finishing driver installation, click adapter utility from your taskbar or programs folder. Click “available networks”, select the wireless access point you would like to connect and press the “Add to Profile” button.
- Fill in the security information if any requirement, and then click “OK” to connect to the wireless network.
- Connected successfully. It will show the status screen.
- Left-click the icon will launch wireless network configuration utility, and you can right-click the icon to show the quick menu of configuration utility. This icon also uses different color to show the status of wireless connection:
- Wireless connection is established, good signal reception.
- Wireless connection is established, weak signal reception.
- Connection is not established yet.
- Wireless network card is not detected.
- For detailed instructions of wireless network configuration utility, please see next chapter.
AP mode for Win8.1/8/7/vista/xp/2000
- Right-click Client configuration utility icon, and click Open Config Utility
- Select Mode and then select Access Point.
- It requires few seconds to switch to AP mode, please be patient
- Client mode icon
- AP mode icon
Configure SSID and Channel
- Please note that Ad-Hoc mode is not available when network card is in AP mode
Mac OS Operating Instructions
-
Please copy all file of CD to the desktop .(If is compressed package，please decompression through windows system first, then copy to the MAC system), open the folder and find the Driver – as below picture:
-
Select the corresponding folder for the system – as below picture:
-
Select the corresponding version – as below picture (my computer version:10.10.5):
-
Please double-click to open Installer.pkg:
-
Please choose “Continue “ to enter the next step.
-
Please choose “Continue “ to enter the next step.
-
Please choose “Continue “ to enter the next step.
-
Please choose “Agree“ to enter the next step.
-
Please choose “Install “ to enter the next step.
-
Please input your power-on password here, then cleck “Install Software”. If no password please click Install Software” directly to enter the next step.
-
Please choose “Continue Installation“ to enter the next step.
-
It show “Installing Wireless USB Adapter Driver”, please waiting a few minutes.
-
Installaton successful, please choose “Restart”.
-
You can see installed the wireless card here after you restart the computer.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>