CilmanCreek 1644978 Leather Power Reclining Sofa with Power Headrests Instruction Manual
- October 30, 2023
- CilmanCreek
Table of Contents
CilmanCreek 1644978 Leather Power Reclining Sofa with Power Headrests
WARNING
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
- 2 people recommended for handling and assembly.
Do not sit on arm rest.
Do not sit on back rest.
WARNING
- Before using reclining furniture, check if the mechanism is restrained by a plastic strap. If so, use scissors to remove.
- Do not allow children to play with the mechanism. Only engage mechanism when the user is seated correctly.
- If squeaks are heard when reclining, lightly apply a store bought spray-on lubricant to all hinges, joints and springs.
- Do not use power reclining furniture in the presence of flammable or explosive gases.
- Do not use in an overly humid environment. During the installation, the power supply must be disconnected. The power supply should be connected only after the installation is complete.
Assembly
Align seat back over metal arms and slide into place. Apply even downward
pressure until the back is fully seated onto the metal
arms.
Connect the cable 1 to cable
- Headrest cable
- Seat cable
Affix back cover to bottom of the frame using the built in hook and loop fastener strip.
Connect part 1 into part 2.
Insert plug into power outlet or surge protected power
strip.
Requires 20 cm / 7.8 in distance from wall for full
recline.
POWER CONNECTIONS
- Ensure that wall power outlet is operational Connect firmly one end of the wire plug transformer cord into the DC adaptor located at the lower back corner of the left of recliner and plug the other end of the transformer cord into a power outlet/wall socket. After all the green lED will he connections are made, the green LED will be lit up.
Disassemble
TROUBLESHOOTINGYOUR POWER RECLINER,
The first case: Product does not recline.
This information is a general guide and pertains to a variety powered
furniture items, not only the model shown in the line
drawings.
Step 1: Check Indicator Light on Wall Plug Transformer
- Make sure the outlet is working properly. Check fuses and breaker box; plug in a lamp to ensure the outlet is working.
- Make sure the wall plug transformer is firmly inserted into the outlet. Try unplugging and reinserting the wall plug transformer.
- A green light on the transformer indicates that it is functional. Proceed to step 2.
- If no light is present, contact our customer service team. Please be ready with a picture of the barcode tag from underneath the footrest.
Step 2 : Check the Connection
- Make sure the power cord plug is firmly inserted into the socket of the item.
- Make sure the power cord is not damaged or pinched.
- If product still does not recline proceed to the next step.
Step 3 : Check Power to Switch, Contact Our Service Team
- If the switch has a USB charging port, please ensure it is functional. If it does not provide power, or if your particular item does not have this USB port (not all items do), please contact our service team.
The second case: lf product reclines but headrest doesn’t function/ The
headrest does not work
Step 1: Check the Product Power Cord Connection
- Check the connection cable, if the headrest still does not work, please contact our service team.
CARE & MAINTENANCE OF LEATHER
- Periodic dusting will prolong the life of the leather.
- General cleaning can be done with a damp, clean, soft white cloth.
- Periodically, a mild leather home furnishings cleaner can be used on the headrests and armrests. This will help prevent buildup of body and hair oils which can harm the leather over time.
- For more stubborn stains, a mild leather cleaner can be used or consult a professional leather technician.
PRODUCT WARRANTY
- I -year warranty on leather against splitting, peeling, and / or tearing.
- 1-year warranty on internal and external frame structure.
- 1-year warranty on cushioning material, seat springs and mechanism.
X AUSTRALIA: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Distributed by: Costco Wholesale Corporation P.O. Box 34535 Seattle, WA 98124-1535 USA 1-800-774-2678 www.costco.com
FCC marking:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FCC instruction:
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The pre-attached USB charger located on the right arm has one output port that can conveniently charge your digital electronic devices.
OPERATING INSTRUCTION : Insert the port of the digital electronic device into the pre-attached USB charger located on the right arm to start charging.
CAUTION
- For your security, please carefully read instructions before charging.
- The USB charger may not be compatible with all digital electronic devices. The max output voltage is 5 V, max current is 2 A. Only the digital electronic devices requiring charge within this range may be charged by the USB port.
- Operation is subject to the following two conditions:
- This charging device may not cause interference;
- This charging device must accept any interference, including interference that may cause undesired operation of the device.