Smart-AVI RKT16-HDX100 Rack 16 Port HDMI Extender User Guide
- June 15, 2024
- Smart-AVI
Table of Contents
Smart-AVI RKT16-HDX100 Rack 16 Port HDMI Extender
OVERVIEW
The RKT16-HDX100 is the perfect solution for extending HDMI signals to a remote location up to 150 feet away. It is the ideal way to consolidate up to sixteen workstation computers into one location. It is fully compatible with MAC, PC, and LINUX HDMI standards. Up to sixteen displays can be extended easily from a rack without the mess or expense of multiple extenders. Rather than buy multiple extenders for rack components, and having to find power strips or numerous power outlets for the adapters, the SmartAVI rack series of extenders allows for up to sixteen inputs sixteen outputs, and one power supply.
FEATURES
- Supports up to 16 HDMI sources
- Supports High Resolution 1920×1200 60Hz WUXGA
- Extends up to 150 feet with Cat5e/6 STP cables
- Zero pixel loss with TMDS signal correction
- DDC from the internal table
- Compatible with all operating systems
- Local HDMI output for each port
- HDMI 1.3 and HDCP compliance
- Compatible with all major DVD players
- Rack Mountable Solution
- Data recovery for digital video
- Plug-and-play ready
- Uncompressed Video
HARDWARE INSTALLATION
-
Power off the HDMI source and display.
-
Connect an HDMI cable from the HDMI source to the HDMI IN port of the RKT16-HDX100 transmitter.
-
Optionally connect an HDMI cable from the HDMI OUT port of the RKT16-HDX100 transmitter to the local HDMI display.
-
Connect the RKT16-HDX100 transmitter to the HDX-RX100 receiver using a CAT5e/6 cable (up to 150ft).
-
Connect an HDMI cable from the HDMI OUT port on the HDX-RX100 receiver to the HDMI display
-
Connect the power on the RKT16-HDX100 transmitter by plugging in their power adapters (12VDC2A) or provide 12VDC input from the rear DC input port.
NOTE: If the RX side has a connected DC adapter, TX can get the DC power over the CAT5e/CAT6 cable, so leave the DC input port empty. Only 1 power supply is required for both units. (In certain cases, if the receiver has too much drop-off power, we recommend connecting a 12V DC power supply to each receiver -
Power on the HDMI source, displays, and speakers. The RX will read the EDID from the monitor, and then pass the data into the TX automatically.
INSTALLATION NOTE
Do not stack receiver units. Stacking inhibits heat distribution.
TECHNICAL SPECIFICATION
VIDEO
Format| HDMI
Maximum Pixel Clock| 165MHz
Inputs| (16) HDMI
Local Outputs| (16) HDMI
Remote Outputs| (16) RJ-45
Resolution| Up to 1920 x 1200 @60Hz or 480p/720i/720p/1080i/1080p
DDC| 5 volts p-p(TTL)
Input Equalization| Automatic
Cable Length| Up to 20 ft
OTHER
Power Internal| 110-240 VAC
Dimensions| 17” W x 3.5” H x 3.25” D
Weight| 10 lbs
Operating Temp.| 0-55 °C (32-131°F)
Storage Temp.| -20-85 °C (-4-185 °F)
Humidity| Up to 95%
WHAT’S IN THE BOX
| PART NO. | QTY | DESCRIPTION |
|---|---|---|
| RKT16-HDX100 | 1 | 16-port HDMI Rack Mountable Transmitter |
| Power Cord | 1 | CCPWR06 |
| Quick Start Guide | 1 |
NOTICE
The information contained in this document is subject to change without
notice. SmartAVI makes no warranty of any kind about this material, including
but not limited to, implied warranties of merchantability and fitness for a
particular purpose. SmartAVI will not be liable for errors contained herein or
for incidental or consequential damages in connection with the furnishing,
performance, or use of this material. No part of this document may be
photocopied, reproduced, or translated into another language without prior
written consent from SmartAVI Technologies, Inc.
800.AVI.2131, 702.800.0005
2455 W Cheyenne Ave, Suite 112
North Las Vegas, NV 89032
SmartAVI.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>