CELESTRON PowerSeeker 80AZS Telescope User Guide
- June 15, 2024
- Celestron
Table of Contents
CELESTRON PowerSeeker 80AZS Telescope User Guide
- Three shut-offs for multiple uses.
- Swivel connection for fast, easy installation.
- Mounting brace included for greater stability.
CAUTION:
- Use a lead anchor when installing into masonry; use a plastic anchor when installing into stucco.
- Brace must be installed to avoid damage to the hose faucet. Refrain from putting pressure on the manifold by tugging at the hose.
- Check local plumbing codes. Codes vary and some may require use of anti-siphon valves to be installed at the ends of the manifold.
- Freezing areas: Disconnect the manifold from the faucet prior to freezing weather to avoid faucet damage.
WARNING: This product contains chemicals known to the state of California
to cause cancer, birth defects, and other reproductive harm. For outdoor use
with cold water only.
Do not spray near electrical connections.
Not for use on appliances.
Installation Instructions
-
Layout A
-
Layout B
Product includes
-
(1) 7%” Brace
-
(1) 10-32 X%” Bolt and Nut
-
(1) #10 Lock Washer
-
(1) %” X 1%” Large Screw
-
(1) #14-16 X 1%” Plastic Wall Anchor
-
(1) Hose Washer
-
(1) #14 X 1%” Screw
-
(1) %” X 1″ Lead Wall Anchor
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>