Etman ETM638P 8-24V Doorbell Instructions
- June 15, 2024
- Etman
Table of Contents
Etman ETM638P 8-24V Doorbell
Product Information
ETM638P, ETM638X
- Name: 8-24V Doorbell
- Color: ETM638P (RAL9016, RAL9003)
- ETM638X (RAL9017, RAL9003)
- Main material: Polycarbonate
- IP-Class: IP20
- Working Temperature: 0°C-35°C
- Fire hazard test: 650°C/850°C (IEC60695-2-11)
- The product complies with the standard(s): EN 62368-1
The product is in conformity with the provisions of the following European directive(s):
- EMC (Directive of Electromagnetic Compatibility) (2014/30/EC)
- RoHS Directive (2011/65/EC)
- WEEE Directive (2002/96/EC)
- REACH Directive (2006/121/EC)
Certificate(s):
- Quality management system according to : ISO 9001
- Environmental management system : ISO 14001
- Technical Info: 8-24VAC/DC
- Frequency: 50Hz
Product information
Type Designation:
| Type | Description/Remark |
|---|---|
| ETM638P | 8-24V Doorbell |
| ETM638X | 8-24V Doorbell Matt black |
| ETM638X | 8-24V Doorbell Matt white |
SAFETY INSTRUCTIONS
Read these instructions carefully before commencing installation and retain for future reference. The Doorbell should be installed by a licensed electrician and in accordance with local regulations. Make sure that the power is off before installation or maintenance.
Installation diagram
User interface
| Key operation | Features |
|---|---|
| Long press for about 3 seconds | Reset default music and volume |
| Short press the button | Next volume level or music |
Note : Each piece of music has three volume levels, for a total of three
pieces of music.
Music is classified by volume level: large, medium, and small. Each time you
short-press the setting button, it will switch to the next volume level. If
the current volume is the lowest, the last music is the lowest volume, and it
will become the maximum volume of the next music. The volume is switched to
the maximum volume of the first music.
This setting can be remembered when the power is off.
Function Description
Press PUSH to switch the doorbell to play according to the currently set volume and music.
Caution!
- Suitable external disconnection device and over current protection device (such as circuit breaker) shall be provided at upstream of the supply wring with a maximum rating of 250Vac 16A, as part of the building installation.
- A single-pole disconnect device can be used to disconnect the phase conductor (+) when it is possible to rely on the identification of the neutral (-) in the mains.
- An additional two-pole disconnect device will be needed in the building installation when the equipment is used where identification of the neutral (-) in the mains is not possible.
- Doorbell fits into standard wall boxes from Etman (C-c 60mm). By surface fixing, please use the surface house (Typed ETM240P).
- By surface fixing, in combination with a switch or others, please use a double surface house (Typed B429).
- Thermoplastic center plate 55X55 mm.
- Screw terminal, capacity: 1.5-2.5mm2.
- No visible screws.
- Only suitable for use in indoor areas.
Gamle Eigereyv. 87, N-4373 Egersund Transportgatan 13, SE-262 71 Ängelholm Myllypuronkatu 30, FI-33330 Tampere Version: 2020/06
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>