NEXDIGITRON A3 Car Dash Camera with Hardwire Kit User Guide
- June 15, 2024
- NEXDIGITRON
Table of Contents
User Guide
HARDWIRE KIT FOR A3 DASHCAM
Package Contents
Hard Wire Cable, 6 Pieces Fuse Tap (3 sizes, 2 each),
QR Code for User Guide
Three Recording Modes in Parking
There are three types of video recording modes – Time-Lapse Video (1 FPS Continuous), Ordinary Video (30 FPS Continuous) & Dormancy (Record Events Only). After car is parked, the duration of video recording can also be selected through the app (15min, 1hour, 6hour & 24hour)
ACC Triggered Parking Mode
The parking mode is controlled by power in ACC Wire. Once car is parked and there is no power in ACC Red Wire, the dashcam will enter parking mode and record video as per the setting selected by you in the app. Once you start the car, the dashcam will detect power in ACC Wire and exit parking mode
Low Battery Protection Function
For vehicle battery discharge protection, it has an intelligent SAFE GUARD function that automatically shuts down dashcam when the voltage falls below preset level. User can select between three protection levels through the app – HIGH (12.4V), MEDIUM (12V) or LOW (11.8V). A fully charged car battery has a voltage of 12.8V or more.
Locate Your Car’s Cabin Fuse Box
For connecting hardwire, you need to located the fuse box present inside the cabin of your car. The above arrows shows the location of cabin fuse box found in different car models available in India.
Identify ACC & VCC Fuses
Identify VCC fuse – 12V power is supplied even when the vehicle is turned off or the ignition key is off. Identify ACC fuse – 12V DC power is not supplied when the vehicle is turned off or the ignition key is off, 12V DC output when the vehicle is on or the ignition key is on
Pull out the ACC & VCC Fuses
Using fuse puller or pliers, remove the identified ACC & VCC fuse from the
fuse box and keep them aside for next steps.
You can WhatsApp the Fuse Box Diagram to NEXDIGITRON Customer Support for fuse
markings if you are unable to identify them.
Match the ACC & VCC Fuse with Fuse Adapter
Your car will have one of the three fuse types available in India – Mini, Low
profile Mini or Micro2. You will need to select the fuse adapter which matches
your car fuse.
Please note colors of fuse adapters may vary between red and yellow as per
availability.
Insert the ACC & VCC Fuse in the Fuse Adapter
Now insert the fuse which your had removed from your car into the fuse adapter as per above image. Please insert fully into the fuse adapter, it could take some effort to push it fully inside. Please insert fuses exactly as per above image.
Join the Wires with Fuse Adapter
Peel off
the red & yellow wire of the hardwire kit, fold it and insert in the blue
terminal of the fuse adapter. Press the terminal with pliers as per above
image so that the wire is firmly secured with the fuse adapter.
Insert the Fuse Adapter in Fuse Box
Now insert the fuse
adapters into the fuse box slots from where you had removed the VCC & ACC
fuses. Press firmly so that its completely inside and secured well.
Connect Black Wire to Car Body
The back wire of the hardwire needs to be directly connected to car body metal
point like screw/nut which is unpainted.
This is present inside the sideway plastic trims.
DO NOT CONNECT to other wires or nuts/screws on plastic parts as it will not
work properly.
Connect the Hardwire to Dashcam
Connect the port of the hardwire kit to the dashcam and tuck in the wires inside your car trims. When correctly connected, the dashcam shutdown music will change when set to record in time lapse mode. If you face any issues, please contact NEXDIGITRON Customer Support through WhatsApp.
Manufactured By
NEX DIGITRONIX LLP, Hinjewadi, Pune, MH, INDIA
Customer Care
Whatsapp/Call: 7737373626
Email-support@nexdigitron.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>