TOPMODEL CZ 02090.2 Electro Sailplane Instruction Manual

TOPMODEL CZ 02090.2 Electro Sailplane

Product Information:

Specifications :

• Part #1A: Fuselage front part
  • Material: Fiberglass
  • Dimensions: Not specified
• Part #1B : Fuselage tube
  • Material: Carbon tube
  • Dimensions: Not specified
• Part #1-1: Engine mount
  • Material: Fiberglass 2 mm
  • Dimensions: Not specified
• Part #1-2 : Servo tray rudder + elevator
  • Material: Plywood 4 x 33 x 65 mm
  • Dimensions: Not specified
• Part #1-6: Tail skid
  • Material: Fibreglass 1 mm
  • Dimensions: Not specified
• Part #2: Wing
  • Material: Balsa assembly
  • Dimensions: Not specified
• Part #2-1: Aileron
  • Material: Balsa
  • Dimensions: Not specified
• Part #2-11 : Flap
  • Material: Balsa
  • Dimensions: Not specified
• Part #2-11A: Flaps coupler
  • Material: Fibreglass 2 x 20 mm
  • Dimensions: Not specified
• Part #24: Wing joiner
  • Material: Al/carbon 7 x 160 mm
  • Dimensions: Not specified
• Part #2-2 : Wing fixing screw
  • Material: Nylon screw M 4 x 20 mm
  • Dimensions: Not specified
• Part #2-21: Centering pin
  • Material: Fibreglass 2 x 20 mm
  • Dimensions: Not specified
• Part #2-3 : Captive nut
  • Material: AL M4
  • Dimensions: Not specified
• Part #2-31 : Nut mount
  • Material: Plywood 3 x 25 x 31 mm
  • Dimensions: Not specified
• Part #2-4: Servo mount
  • Material: Wood 6x12x11 mm
  • Dimensions: Not specified
• Part #2-41: Wing servo cover
  • Material: ABS plastic
  • Dimensions: Not specified
• Part #2-5 : Aileron pushrod
  • Material: Piano wire M2 x 31 mm
  • Dimensions: Not specified
• Part #2-51: Flap pushrod
  • Material: Piano wire M2 x 31 mm
  • Dimensions: Not specified
• Part #2-6: Clevis
  • Material: MPJ 2100
  • Dimensions: Not specified
• Part #2-61: Flap clevis
  • Material: MPJ 2140, nut M2, MPJ2406
  • Dimensions: Not specified
• Part #2-8: Aileron horn
  • Material: Fibreglass plate 1 mm
  • Dimensions: Not specified
• Part #2-81: Flap horn
  • Material: Fibreglass plate 1 mm
  • Dimensions: Not specified
• Part #3: Horizontal stabilizer
  • Material: Balsa assembly
  • Dimensions: Not specified
• Part #3-5: Elevator link
  • Material: Bowden 2 mm L=760mm, piano wire 0.8 mm L=820mm
  • Dimensions: Not specified
• Part #3-6 : Thread coupler
  • Material: MPJ 2014
  • Dimensions: Not specified
• Part #3-7: Clevis
  • Material: MPJ 2100
  • Dimensions: Not specified
• Part #3-8: Elevator horn
  • Material: Fibreglass plate 1 mm
  • Dimensions: Not specified
• Part #4: Vertical tail
  • Material: Balsa assembly
  • Dimensions: Not specified
• Part #4-5: Rudder link
  • Material: Bowden 2 mm L=720mm, piano wire 0.8 mm L=760mm
  • Dimensions: Not specified
• Part #4- 6: Thread coupler
  • Material: MPJ 2014
  • Dimensions: Not specified
• Part #4-7: Clevis
  • Material: MPJ 2100
  • Dimensions: Not specified
• Part #4-8: Rudder horn
  • Material: Fibreglass 1 mm
  • Dimensions: Not specified
• Part #5: Fuselage servo cover
  • Material: Fibreglass
  • Dimensions: Not specified
• Part #6: Canopy
  • Material: Fibreglass
  • Dimensions: Not specified
• Part #6-1: Canopy fixing
  • Material: Piano wire 1×129 mm, bowden 2×10 mm
  • Dimensions: Not specified
• Part #6-2: Fiberglass textile
  • Material: 60x30mm
  • Dimensions: Not specified
• Part #7: Stickers
  • Material: Not specified
  • Dimensions: Not specified

Product Usage Instructions:

Fuselage Assembly:

1. Attach Part #1A (Fuselage front part) to Part #1B (Fuselage tube) using appropriate adhesive.
2. Connect Part #1-1 (Engine mount) to the fuselage assembly.
3. Attach Part #1-2 (Servo tray rudder + elevator) to the fuselage assembly.
4. Install Part #1-6 (Tail skid) at the rear of the fuselage.

Wing Assembly:

1. Assemble the balsa wing (Part #2) according to the provided building instructions.
2. Attach Part #2-1 (Aileron) and Part #2-11 (Flap) to the wing assembly.
3. Connect Part #2-11A (Flaps coupler) to the flaps.
4. Insert Part #24 (Wing joiner) into the wings for added stability.
5. Secure the wings using Part #2-2 (Wing fixing screw).
6. Use Part #2-21 (Centering pin) to align and secure the wings.
7. Attach Part #2-3 (Captive nut),

• www.topmodelz.com
• e-mail: info@topmodelcz.cz

Radio system you’ll need:

• 1095mm
• 1999mm
• 34,8dm 17,2-21,6g/dm
• 0,6 – 0,75 kg

PART LIST

**Part #| ****Part name| Material, dimensions| ****Loose| ****In bag**
---|---|---|---|---
| building instruction| | 01| –
1A| fuselage front part| fibreglass| 01| –
1B| fuselage tube| carbon tube| 01|
1-1| engine mount| fibreglass 2 mm| –| 01
1-2| servo tray rudder + elevator| plywood 4 x 33 x 65 mm| –| 01
1-6| tail skid| fibreglass 1 mm| –| 01
2| wing| balsa assembly| 02| –
2-1| aileron| balsa| 02| –
2-11| flap| balsa| 02| –
2-11A| flaps coupler| fibreglass Æ 2 x 20 mm| –| 01
24| wing joiner| Al/carbon Æ 7 x 160 mm| –| 01
2-2| wing fixing screw| nylon screw M 4 x 20 mm| –| 02
2-21| centering pin| fibreglass Æ 2 x 20 mm| –| 01
2-3| captive nut| AL M4| –| 02
2-31| nut mount| plywood 3 x 25 x 31 mm| –| 01
2-4| servo mount| wood 6x12x11 mm| –| 04
2-41| wing servo cover| ABS plastic| –| 02
2-5| aileron pushrod| piano wire M2 x 31 mm| –| 02
2-51| flap pushrod| piano wire M2 x 31 mm| –| 01
2-6| clevis| MPJ 2100| –| 04
2-61| flap clevis| MPJ 2140, nut M2, MPJ2406| –| 01+01+01
2-8| aileron horn| fibreglass plate 1 mm| –| 02
2-81| flap horn| fibreglass plate 1 mm| –| 01
3| horizontal stabilizer| balsa assembly| 01| –
3-5| elevator link|

• bowden Æ2 mm L=760mm,
• piano wire Æ0,8 mm L= 820mm

| 01+01| –
3-6| thread coupler| MPJ 2014| –| 01
3-7| clevis| MPJ 2100| –| 01
3-8| elevator horn| Fibreglass plate 1 mm| –| 01
4| vertical tail| balsa assembly| 01| –
4-5| rudder link|

• bowden Æ2 mm L=720mm,
• piano wire Æ0,8 mm L= 760mm

| 01+01| –
4-6| thread coupler| MPJ 2014| –| 01
4-7| clevis| MPJ 2100| –| 01
4-8| rudder horn| fibreglass 1 mm| –| 01
5| fuselage servo cover| fibreglass| 01| –
6| canopy| fibreglass| 01| –
6-1| canopy fixing|

• piano wire Æ1×129 mm,
• bowden Æ2×10 mm

| –| 01+01
6-2| Fiberglass textile| 60x30mm| –| 01
7| stickers| | 01|

RECOMMENDED EQUIPMENT

• Radio :
  • 5 channel + 7 channel (receiver)
• Servos :
  • Ailerons – 2 x Servo ES 08 MD I
  • Flaps – 1 x HS-65MG
  • Elevator – 1 x HS-55
  • Rudder – 1 x HS-55
• Motor :
  • MEGA RC F5-J
• Controller:
  • JETI SPIN 33
  • Spinner: Turbo 36/3.17/8 • 36/3,17 mm, for blade root width 8 mm
  • Folding propeller blades: CAM CARBON 10/6
  • Battery: 2S LiPo – 1,5 – 1,7Ah
  • 2 x Flat extension cable 15cm ;
  • Twisted cable – thin – cca 1,2 m
  • Thermo-Shrinkable insulation © 1,6 mm – cca 0,2 m.

ATTENTION!
This model construction kit is not a toy and is not suitable for childern under the age of 14. Incorrect use of this model could cause material damage or personal injury. You are fully responsible for your actions when you use this model. Fly at a safe distance from occupied zones. Before switching on the radio, be sure, that no one else is using the same frequency as you ! Before first take-off check up please the center of gravity, the sense and size of the control surface angle and if model aeroplane parts aren’t crooked. The reparation is possible through the use of hot-air dryer.

ASSEMBLY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>