VIVITAR ISING ISK204-BLK Karaoke Speaker Instruction Manual
- June 15, 2024
- VIVITAR ISING
Table of Contents
ISING
Karaoke Speaker Manual ISK204-BLK
Packing list:
- Speaker……….1PC
- Microphone………….2pcs
- User Manual………….1pc
- USB charging cable…………1pc
- Aux-in cable…………1pc
Description:
Button function:
+: Short press “+”, it will be NEXT song, long press “+” to increase the
volume
: Short press “”, it will be PREVIOUS song, long press “_” to decrease the
volume
: short press to pause and play music Model: MIC204
- Microphone ON/OFF ， press and hold 3 seconds to turn on and of the microphone
- Auto-pairing microphone, when both the speaker and microphone is turned on, microphone will automatically connect to the speaker by bluetooth technology ， working range:10m
- Double click on/of button to be with/without reverberation, single click is Mute 4
- Charging time for microphone is 2.5 hours, and playtime is 8 hours
- The light indicator will be red all the time when charging, and will be of when fully charged.
Colorful Karaoke Lights Design:
Lighting function:
5 color LED light effect, changing all the time at the front of the speaker
Bluetooth Paring:
Turn on the speaker, find paring name: on your
phone, the speaker will say “Let’s sing” after paring successfully.
Microphone bluetooth paring: turn on the microphone by long pressing the
ISK204 Karaoke Speaker on/of button for 3 seconds, the indicator will be
flashing between blue and red light before paring, and the microphone bluetooth
will automatically connect to the speaker ，after paring successfully the
indicator will be red
Charging Instruction:
Both speaker and wireless microphone are charged by usb charging cable.
The red light is always on when charging, and it will be of when speaker and
microphone are fully charged
Note:
- Please don’t play music while charging.
- When the microphone is turned on, do not point it strait to the speaker to avoid howling.
Product Parametes:
Speaker Power Supply: Built-in 7.4V 1200mAh 18650 Li-batery Mic
Power Supply: Built-in 3.7V 500mAh 14500 Li-battery.
Frequency: 100HZ—18KHZ
Driver unit: 3”*2
Driver Power output: 10W+10W, each driver 10W, total 20W
Material : Plastic + Metal mesh
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates , uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>