GREEN STAR GP-E1503 Greenpower Juicer User Manual

GREEN STAR GP-E1503 Greenpower Juicer

Product Information

Specifications

• Juice Extractor with TTW Wiinn Ggear Technology
• Patented Twin Gear impeller press system
• Rotates at a low 110rpm
• Generates virtually no or low heat to your juice
• Magnets and bio-ceramic materials in Twin Gears produce fresher juice and prolong storage time of enzymes and vitamins

Features

• Juices a variety of fruits, vegetables, and even wheatgrass and pine needles
• Can be used for making pastas, baby foods, breadsticks, nut butters, pates, frozen sorbets, and more
• Easy to dismantle and reassemble for proper cleaning
• Includes many accessories for enhanced food preparation versatility

Usage Instructions

1. Ensure all specified parts are included and unpacked
2. Familiarize yourself with the machine by dismantling and reassembling it a few times
3. Thoroughly wash the parts by rinsing them in lukewarm water before the first usage
4. Follow the specific instructions for juicing different fruits, vegetables, or other foods (refer to the user manual for details)
5. After juicing, disassemble the machine for cleaning
6. Clean the parts with lukewarm water and mild detergent, ensuring all residue is removed
7. Dry the parts completely before reassembling and storing

FAQ (Frequently Asked Questions)

Q: What can I juice with the Green Star Gold Juice Extractor?
A: The Green Star Gold Juice Extractor can juice a wide range of fruits, vegetables, wheatgrass, and even pine needles.

Q: Can I use the Green Star Gold Juice Extractor for purposes other than juicing?
A: Yes, you can use this juicer to make pastas, baby foods, breadsticks, nut butters, pates, frozen sorbets, and more.

Q: How should I clean the Green Star Gold Juice Extractor?
A: Wash the parts with lukewarm water and mild detergent, ensuring all residue is removed. Dry the parts completely before reassembling and storing.

Q: Can I put the parts of the Green Star Gold Juice Extractor in the dishwasher?
A: No, the parts should not be placed in the dishwasher. They should be washed by hand.

Congratulations!

You are now the proud owner of a new Green Star Gold Juice Extractor. The Green Star Gold Juice Extractor will juice almost anything from carrots and apples to wheatgrass and pine needles. You are not limited to just regular juicing — you can enjoy a variety of other delicious foods such as pastas, baby foods, breadsticks, nut butters, pates, frozen sorbets and more.
The revolutionary design incorporates patented Twin Gear impeller press system that powerfully rotates at a low 110rpm, — generating virtually no or low heat to your juice. The patented Twin Gears have magnets and bio-ceramic materials that produce fresher juice and prolongs the storage time of the precious enzymes and vitamins retained in the juice.
After unpacking your Green Star Gold and checking that all the specified parts are there, take time to become familiar with your new Green Star Gold Juice Extractor before you start juicing. It would be a good idea to dismantle and reassemble the machine a few times to become familiar with how the parts fit together properly. Many accessories have been included as standard parts to make your juicing experience easier and to enhance your food preparation versatility.
We recommend washing the parts thoroughly by rinsing them in lukewarm water prior to the first usage of the Green Star Gold Juice Extractor. Now you are ready to make your first Green Star Gold juice. Happy juicing to all!

WARRANTY

(Please read carefully)

We warrant to you, the end-user customer who has properly registered after purchasing the Green Star
Gold Juice Extractor (hereinafter referred to as “GS GOLD”) for a valuable consideration, that the plastic parts, motor and the Twin Gears of this GS GOLD will be free from defects in materials and workmanship for a period of five (5) years from the date of purchase. All other parts, including but not limited to the Juice Pitcher, Cleaning Brush, Wooden or Plastic Plunger and the Strainer are not subject to any warranty.
In order for you to receive the benefits of this warranty, you are required to complete and mail the warranty registration card (next 2 pages) to us within ten (10) days following the purchase of your GS GOLD.

1. No warranty will be provided until after we have actually received the enclosed warranty registration card, containing all the requested information, within ten (10) days of the date of the original purchase. The warranty is only good for the original purchaser for value. This warranty is non-transferable.
2. If the GS GOLD exhibits defects while in normal household use, we, upon our actual receipt of a written notice of such defects from you during the warranty period, we will, at our option, either repair or replace the GS GOLD which prove to be defective. However, we have no such obligation to repair or replace until after you have, by insured mail and in protective packaging*, delivered the GS GOLD to the location of your service center as set forth on page 5. Replacement GS GOLD may be either new or like-new. GS GOLD may contain re-manufactured or re-conditioned parts, which are equivalent to new in performance or may have been subject to incidental use.
3. We do not warrant that the operation of the GS GOLD will be uninterrupted or error free. In no event shall our liability exceed the retail value of the GS GOLD.
4. All warranty and repair services must be performed at a warranty service center, which is located within the country where the Green Star Gold was originally purchased. However, in the event that: [Ⅰ] the machine must be serviced at a service center, which is not located within the country where the machine was purchased; or [Ⅱ] there in no service center within the country where the machine is located and must be shipped to a service center in another country, then thosc service centers are responsible for the parts and service only, and any and all costs relating to the shipping, delivery and handling of the machine to and from those service centers shall be the sole responsibility of the owner.

This Warranty does not cover defects resulting from: [a] failure to operate the GS GOLD in accordance with the instructions; [b] use of parts or supplies not provided or authorized by us; [c] negligent, improper or inadequate maintenance; [d] service performed or attempted by unauthorized service person; [e] damages, accidental or otherwise to the GS GOLD, which are not directly caused by us or the manufacturer; or [f] damages resulting from abuse, tampering, misuse, commercial use, or unauthorized modification of the GS GOLD.
WE MAKE NO OTHER EXPRESS OR IMPLIED WARRANTY OR CONDITION WHETHER WRITTEN OR ORAL. TO THE EXTENT ALLOWED BY LOCAL LAW, ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY IS LIMITED TO ONE (1) YEAR. In the event that such limitation or exclusion on the duration of an implied warranty is not allowed in the state or county wherein you reside, the above limitation or exclusion will not apply. This warranty gives you specific legal rights and protection, and you might also have other rights that vary from state to state, or county to county.
TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES. EXCEPT AS INDICATED ABOVE, IN NO EVENT WILL WE BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST PROFIT), OR OTHER DAMAGE, WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some states or counties may not allow the exclusion or limitation of incidental or consequential damages. If you reside in such a state or county, the above limitation or exclusion may not be applicable.
Do not send your GS GOLD back to the service center without return authorization.
Save Original Shipping Box

Thanks for taking the time to fill out this questionnaire. Your answers will be used for market research studies and reports and will help us better serve you in the future. They will also allow you to receive important mailings and special offers from a number of fine companies whose products and services relate directly to the information indicated above.
Please check here if, for some reason, you would prefer not to participate in this opportunity. If you have comments or suggestions about our product, please write to: Green Star Gold Customer Relations

IMPORTANT! GREEN STAR GOLD JUICER
REGISTRATION FORM

OPTIONAL SURVEY

How did you first become aware of this Juicer? (Please check only one.)

1. Received as Gift.
2. Magazine Advertisement
3. Newspaper Advertisement
4. TV Advertisement
5. Radio Advertisement
6. In-store Display/ Demonstration
7. Consumer Magazine Article
8. Friend’s/Relative’s Recommendation
9. Salesperson’s Recommendation
10. Information Through the Mail
11. Other

Occupation:

1. Homemaker
2. Professional/Technical
3. Upper Management/ Executive
4. Middle Management
5. Sales/Marketing
6. Clerical or Service Worker
7. Tradesman/Machine Oper./ Laborer
8. Retired
9. Student
10. Self Employed/Busines owner

What factors most influenced your decision to purchase this juicer?(Please check up to three.)

1. Green Star Gold Reputation
2. Style/Appearance
3. Value for the Price
4. Special Product Features
5. Warranty
6. Rebate or Sale Price
7. Quality/Durability
8. Consumer Magazine Article
9. Reputation of the Dealer
10. Friend’s/Relative’s Recommendation
11. Salesperson’s Recommendation
12. Other

Which group describes your annual family income?

1. Under US＄15,000
2. US＄15,000~US＄19,999
3. US＄20,000~US＄24,999
4. US＄25,000~US＄29,999
5. US＄30,000~US＄34,999
6. US＄35,000~US＄39,999
7. US＄40,000~US＄44,999
8. US＄45,000~US＄49,999
9. US＄50,000~US＄59,999
10. US＄60,000~US＄74,999
11. US＄75,000~US＄99,999
12. US＄100,000~US＄over

Which credit cards do you use regularly?

1. American Express
2. Diners Club
3. Master Card.
4. Visa.
5. Discover.
6. Department Store
7. Oil Company, etc.
8. Do not use credit cards

For your primary residence, do you:

1. Own a House?
2. Own a Townhouse or Condominium?
3. Rent a House?
4. Rent an Apartment, Townhoesr or Condominium?

WHEN YOU NEED SERVICE

In the unlikely event that you do need service on your GREEN STAR GOLD JUICE EXTRACTOR, or if it fails to function properly while within the warranty period (used in normal : household operation only.) – PLEASE FOLLOW THE INSTRUCTIONS BELOW :
Contact the nearest authorized Green Star Gold Service Center.

SERVICE CENTERS
For all service inquiries, please first contact the Main Service Center for a return merchandise authorization (RMA) number and proper routing instructions

Main Service Center
Tribest Corporation 1143 North Patt Street Anaheim, CA 92801 TEL : 888-254-7336 FAX : 714-879-7140

Regional Service Centers West
3800 Happy Lane, Suite A Sacramento, CA 95827-9721

East
47 Miry Brook Road Danbury, CT 06810

Midwest
21355 Highway 179 Jamestown, MO 65046

• Explain the problem you are experiencing. Call Customer Service(888-254-7336)to get a return authorization number to send your unit to the service center. Any package received without a return authorization number will be refused and returned to the sender.
• Pack your Green Star Gold securely in the original shipping box. Make sure all parts are enclosed. Fill out the service request form below, detach it and enclose it in the shipping box.
• Securely seal the shipping box with strapping tape.
• Address the box to the service center. Be sure to put your return address on the outside of the package.
• It is always wise to insure the package against possible damages or loss in transit. Ship prepaid.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed including the following:

1. Please read all instructions carefully.
2. To protect against risk of electric shock, do not put the motor base in water or other liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug the appliance from the electrical outlet when not in use, before assembling or disassembling and before cleaning.
5. While the machine is in operation, avoid contact with its moving parts.
6. Do not operate any appliance with a damaged cord or plug, after the appliance malfunctions, is dropped, or is damaged in any manner. Return the appliance to the nearest authorized service center for examination and possible repair to prevent electrical shock or injury.
7. The use of attachments not recommended or sold by the manufacturer may cause fire, electrical shock or injury.
8. Do not use outdoors.
9. Do not let the cord hang over the edge of a table or counter.
10. Do not let the cord contact any hot surfaces such as the stove.
11. Always make sure the two latching arm knobs are fastened securely in place before the motor is turned on. Do not unfasten those knobs while the juicer is in operation.
12. Be sure to turn the switch to the off position after each use. Make sure the motor stops completely before disassembling.
13. Do not put your fingers or other objects into the juicer opening while it is in operation. If food becomes lodged in the feeding chute, use the wooden plunger or another piece of fruit or vegetable to push it down. When this method is not possible, turn the motor off and disassemble the juicer to remove the remnant of food.
14. Your juicer is for household use only.
15. Please refer to : “INSTRUCTIONS”before operating.
16. Please refer to“When You Need Service”in case your juicer is functioning abnormally.
17. Do not disassemble any parts other than those necessary for normal operation or cleaning of your juice extractor(such as housing, twin gears, screen).
18. Your Green Star Gold Juice Extractor must be grounded electrically for proper, safe operation. Use only the 3-prong plug provided. Or use a proper plug or adapter according to the electrical safety code in your country.
19. Do not use the appliance for other than its intended use.

DO’S AND DON’TS

DO :

• Very important! When joining the Twin Gears for assembly-make sure to align the locating dots marked on the surface of the gears.
• Soak grains in water for 6 hours or more. Drain the grain and put into the machine a little at a time, together with a small amount of water.
• When you operate your Green Star Gold Juice Extractor continuously, stop operation for 10 minutes after each 30 minutes and then resume operation. 30min / operation 10min / rest
• Please always put the Feeding Chute into the Twin Gear Housing before using. How to assemble the Feeding Chute can be found on page 11.

DON’T :

• Do not lift your Green Star Gold Juice Extractor with wet hands because it is heavy and it may accidentally slip from your grip.
• Do not keep the juice extractor where children can reach it.
• Do not assemble or disassemble while the power cord is plugged in.
• Do not put any articles such as Knives, spoons, or forks into the Feeding Chute.
• Do not put fingers or hands into the Feeding Chute. Always use the Plunger.
• Do not operate Green Star Gold Juice Extractor on an unstable surface.
• Do not disconnect the power plug from the electrical outlet with wet hands.
• Do not forcibly operate the juice extractor or overload the Feeding Chute.

GREEN STAR GOLD JUICE EXTRACTOR

Green Star Gold Parts

FEATURES AND PARTS

Green Star Gold parts

GREEN STAR GOLD PARTS

GREEN STAR GOLD PARTS & ORDER FORM

Assorted Sets price
Twin Gear Set| Includes 1 Free Wheel Gear & 1 Drive Gear| $95.00|  |
Pasta Set| Includes 1 Pasta Screen,1 Pasta Attachment,1 Pasta Screw &1 Pasta Guide| $43.00|  |
Bread Stick Maker Set| Includes 1 Bread Stick Blank & Bread Stick Guide| $18.00|  |
Shipping & Handling Chart

(Via Surface)

__Merchandise                        Shipping &

__Subtotal                              Handling charge

Less than U$20.00              U$7.00

U$20.00 – U$30.00             U$8.00

Over U$30.00                      U$8.00 plus 5% of Subtotal

| Subtotal|
TAX|
Shipping/Handling|
Total Enclosed|

Payment Method\

Send this order form, along with your method of payment in a stamped envelope to the nearest Green Star Gold Service Center

GREEN STAR GOLD ASSEMBLY

Safety Reminder: Make sure to unplug the juicer from the outlet before assembling.

1. Join the Twin Gear Housing to the body with the Latching Arm Knobs loosened and the Latching Arms open.
   Insert the Feeding Chute into the Twin Gear Housing “neck”, with the small rectangular tab toward the rear of the machine.
   Note: Before putting your machine away for future use, once it has been cleaned and dried, cover the Feeding Chute with its protective lid. Simply place the Feeding Chute Lid on top of the Feeding Chute, with the two “ears” pointing to the sides of the juicer and the oval end of the lid toward the front of the machine. Gently push it down into position. Remove lid before using the juicer.

2. Very Important!
   Assemble the Twin Gears as follows: Find the ‘Locating Dots’ marked on the end surface of each gear. Position the ‘Locating Dots’ so that the single dot is betwweeen the two dots on the other gear. Holding the Twin Gears in this position, insert them into the Twin Gear Housing.
   While assembling your juicer, if you want to check whether the Twin Gears are seated properly, look down the feeding chute. If you see any part of the drive shaft in front of the left hand side gear, you need to jiggle / push the left hand side gear a little more. If all you see is the gear threads, the gears are fully seated into position.
   Failure to properly seat the Twin Gears could result in damage to the Gears and the Drive Shaft which may not be covered under the warranty.

3. Slide the desired Screen or Blank over the Twin Gears and into the Twin Gear Housing.

4. Slide the Pulp Discharge Casing over the gears and screen into the Twin Gear Housing.

5. Place each Latching Arm into the corresponding groove of the Twin Gear Housing. Turn both Latching Arm Knobs clockwise and tighten.

6. Insert the Outlet Adjusting Knob into the Pulp Discharge Casing and turn clockwise. When the Outlet Adjusting Knob comes to a stop, it is considered ‘tight’. You may be able to twist the knob to get it to go in further, but, do not over-tighten.

7. Place the Safety Tray on the Feeding Chute.

8. You are now ready to start Juicing.

GREEN STAR GOLD DISASSEMBLY

Safety Reminder: Make sure to unplug the juicer from the outlet before disassembly

1. Remove the Safety Tray by lifting it vertically from the Feeding Chute.
2. Turn the Outlet Adjusting Knob counter clockwise until it separates from its threads : then pull it out from its grooves.
3. Turn the Latching Arm Knobs counter clockwise to loosen. Open the Latching Arms horizontally outward on their hinges.
4. Remove the Pulp Discharge Casing.
5. Remove the Screen. The Twin Gears may come out with it. Be careful not to drop the Twin Gears.
6. Slide the Twin Gears out.
7. Remove the Twin Gear Housing by grasping the Feeding Chute. Then, gently pull it away from the body of the machine.

Note: The Twin Gears on your juicer never need sharpening. They are not blades. They work by “biting” off small bits of produce at a time－much like your teeth. They do not cut, chip or tear the produce that builds up heat which destroys enzymes.

MACHINE SETUP

Screens —– Which one to use

1. Fine Screen separates maximum pulp from the juice. However, the pressure built up inside of the screen could push some finely ground pulp through holes of the screen. So, minimum pulp may be contained in the juice. Use to juice: carrot, parsley, kale, angelica utilis, wheatgrass, other green leafy vegetables and herbs.
2. Coarse Screen: allows some pulp to mix with the juice. Use to juice: Apples, Oranges, many other kinds of fruits and vegetables.
3. Homogenizing Blank (Open Blank) : to puree, frozen desserts, baby foods, nut butters, apple sauce, pate, relish, etc. use with: grains, garlic, banana, strawberry, nuts, etc. To use the Homogenizing Blank, insert side “A”first with hole “B”facing downwards, over the Twin Gears and into the Twin Gear Housing.

How to use Plastic Plunger
When you use the Plastic Plunger, please place the Safety Tray on top of the Feeding Chute, pointing the marked arrow(←)toward the Outlet Adjusting Knob.

How to use Drip Tray
Position the smaller end of the Drip Tray underneath the front two legs of the juicer under where the juice drips. Set the juice pitcher on top for collecting juice.

Using the Wooden Plunger?
Do not be timid about touching the Twin Gears with the wooden plunger while juicing. It will not harm either the gears or the plunger. The plunger is made from the same high quality wood as many fine chopping blocks, so any accidental particles of cellulose scraped off by contact with the Twin Gears are non-toxic and will pass through harmlessly with the pulp.

To juice wheat grass (Also barley grass, alfalfa & others)

1. Fit the juice extractor with the Fine Screen for maximum juice extraction and pulp separation.
2. Close the Outlet Adjusting Knob completely.
3. With the power switch in the “on”position; place a bunch of wheat grass (approx. 3/4 inch in diameter) tip down, into the Feeding Chute.
4. After a few drops of juice come out from the Pulp Discharge Outlet, loosen the Outlet Adjusting Knob about half way.
5. Carrots, apples and other “more palatable”fruits and vegetables can be added to create a milder tasting combination for those who have not yet “acquired”a taste for pure wheat grass juice.
   Note: Please refer to “Wheat Grass Delight”on page 22.

To make pasta

1. Attach the Twin Gear Housing to the juicer body.
2. Take out the Twin Gear and insert the Pasta Screw onto the motor drive shaft (left side as you are looking at the front of the body).
3. Put the Pasta Guide over the Pasta Screw, making sure the long side of the Pasta Guide faces to the left side.
4. Select the pasta type which is desired from the two shapes provided on the Pasta Screen and fit it onto the Pasta Guide.
5. Place Pasta Attachment accordingly.
6. Tighten the Latching Arm Knobs.
7. The machine is now ready to make pasta.
8. Be sure the dough is not too moist.

To make bread sticks, bagels, rice cake (mochi), etc.

1. Replace the juicing screen with the Bread Stick Blank.
2. Attach the Pulp Discharge Casing to the Twin Gear Housing, thus locking the Bread Stick Blank into position.
3. Unscrew the Outlet Adjusting Knob (not shown here) from the Pulp Discharge Casing and replace it with the Bread Stick Guide.
4. Place the Safety Tray into position.
5. Add materials to be used into the Feeding Chute.

CLEANING AND MAINTENANCE

Proper Cleaning Lengthens the Life Span of the Juice Extractor

• Since Green Star Gold extracts minerals, such as calcium, from the produce so well, we recommend cleaning all of the juicer parts immediately after use to prevent mineral build-up which can cause problems.
• Completely remove the Pulp Discharge Casing and Twin Gear Housing sections. Immerse them in water and clean them with the Cleaning Brush, which is provided for your convenience.
• After cleaning the juice extractor, let it dry thoroughly.

To Remove Calcium and Mineral Deposits from the Twin Gears
After using the machine for some time, you may notice a calcium or mineral deposit on the surfaces of the Twin Gears. This deposit needs to be removed as follows: After juicing carrots, feed some of the carrot pulp back through the machine and then add some granulated sugar(Ratio : one table-spoon of carrot pulp to one or two tea-spoon of granulated sugar). Alternate pulp and sugar several times and then run the machine.

Cleaning Procedure

• First – make sure the machine is switched off and, for added safety, remove the plug from the wall and store it in the Cord Storage Compartment.
• Because your Green Star Gold Juicer extracts calcium and other substances from the produce as it goes through the machine, it is essential to wash up immediately after use, otherwise the calcium may cake up on various parts and may cause problems.
• Disassemble the juicer as shown on page 13-14 and immerse each component in lukewarm water. Clean out all the pulp with the multipurpose Cleaning Brush provided, using the thinner end to force out the pulp, which normally collects in the Pulp Discharge Outlet.
• If necessary, use mild detergent.
• When cleaning the Fine Screen, brush away from the corners, avoiding a build-up of pulp, which will be difficult to remove later.
• Under no circumstances should you allow water to enter the main body of the machine. Please refer to HELPFUL HINTS(page 20).
• Rinse the soapy water from the components, dry them thoroughly before they are reassembled.
• You will find it difficult to prevent some of the inside surfaces from becoming stained by harmless pigments contained in certain fruits and vegetables, but the outside surfaces should always remain stain free.
• Do not use harsh chemicals, such as bleach to remove food stains from the jucer.
• Do not drop any of the components, particularly the Twin Gears which are very expensive. Our warranty does not cover accidental damage.
• Do not put any parts into the dishwasher. (The plastic part are not dishwasher safe).

TROUBLE SHOOTING

Symptom – What if:

Machine doesn’t turn on.
Machine stops
Noisy gears
Pulp discharge casing doesn’t fit properly
Pulp discharge casing begins shaking
Pulp is not being ejected
Too much pulp
Pulp comes out with juice
Low amount of juice
Material jammed
Check to see if:

● The power supply is active; the plug is correctly positioned in the electrical outlet and the machine is switched on.

● The fuse is okay.

● The machine is correctly assembled.

● The machine is overloaded? If so, it will stop automatically.

● The material you are trying to process is cut too large or is too hard.

● The fuse is okay.

● The Twin Gears are correctly aligned.

● There is any hard material lodged in the gears.

● Left-hand side Twin Gear is not seated correctly – give it a twist while pushing in gently to seat it securely.
● The Latching Arm Knobs are securely tightened
● Loosen the Outlet Adjusting Knob
● Tighten the Outlet Adjusting Knob
● The Screen is in position

● Tighten the Outlet Adjusting Knob

● Outlet Adjusting Knob is in position, or needs to be tightened.
● Flick the power switch to the reverse position once or twice.

● If it doesn’t clear, machine must be dismantled

to clear the blockage.

Fuse Location and How to Change the Fuse

1. Unplug the juicer from the wall socket and store the cord in the Cord Storage Compartment.
2. Locate the screws in black rubber leg on bottom plate. Using screwdriver (Philip’s head), remove the 8 screws that hold the plate in position. Remove the bottom plate.
3. Find the round, capsule-shaped, milky-colored fuse casing inside of the machine. There is a white wire extending from each end of the capsule.
4. Grasp one end of the fuse casing between the index finger and thumb of one hand; and the other end of the fuse casing in the other hand. Push both ends toward the center and twist to open the fuse holder. Release both ends.
5. Remove the old fuse from the casing and discard properly. Place a new fuse into the casing. Close the fuse casing by reversing the procedure in Step 4, above.
6. Replace bottom plate and the screws to secure to plate.

If your Green Star Gold Juice Extractor still experiences a problem after using the suggestions given in the Trouble Shooting Section, please contact your nearest authorized service center.
Green Star Gold requires special repair procedures; therefore repairs beyond the scope of the Trouble Shooting Chart should never be attempted by anyone other than an authorized service center.
Once the machine has stopped, please wait and try to turn it on again approximately 10 minutes later.
In the unlikely event that the Feeding Chute becomes clogged or jammed while juicing or processing any food item:

• A. Switch the on / off lever to the reverse position to dislodge the food.
• B. If A, above, did not dislodge the food TURN THE MACHINE OFF AND DISCONNECT IT FROM THE ELECTRICAL OUTLET (FOR SAFETY). It is now safe to use a suitable, blunt tool to loosen whatever food is lodged in the Feeding Chute.

HELPFUL HINTS

NOISES
Even though the Green Star Gold juicer is very quiet, there may be some normal noises. Please test your juicer as follows ;

1. Completely disassemble your Green Star Gold and then turn on the motor. You will hear a normal humming motor sound. If you hear any squeaking sound, your juicer may need lubrication between the Drive Shaft and the rubber seals. Do not be intimidated because of this noise. It is a very minor problem and does not affect the juicer’s performance nor will it damage any other parts on your juicer. Please call your service center for instructions on how to lubricate your juicer.
2. Fully assemble your juicer and turn it on without adding any produce. You will hear the Twin Gear sound. You may hear a thumping sound which is normal. The Twin Gears may have minor variations and the thumping sound is considered acceptable. This minor variation will not affect the function nor will it damage any parts.
3. While you are juicing you may hear a squeaking or chirping sound－that noise is also considered to be normal.

MOVEMENTS
Because of the pressure build up around the screen while you are juicing, the front part of the Green Star Gold may wiggle. The flexing is normal and will not cause damage to any part involved because all the front parts are rubber cushioned.

JUICING
Remember that your juicer needs time－it is only revolving at 110 rpm. The most nutritious juice is made slowly, allowing the produce to come into contact with the magnetic field(focused only in the tiny space between the gears) for a maximum length of time. Also, slow juicing is more gentle, creating less heat build up.

1. Carrot
   The Twin Gears are not blades－you will need to firmly push carrots into slowly rotating gears. Cut thicker carrots into lengthwise pieces for easier juicing. The Plastic Plunger does not reach all the way to the gears－so try tapping that last bit of carrot with the Wooden Plunger for complete juicing.

2. Wheat Grass
   To minimize the amount of foam produced… refrigerate the gears and wheat grass about 2 hours or even overnight before juicing. As you are juicing spray some water on wheat grass. Another way to reduce the amount of foam produced is to pour a 1/2 teaspoonful of flaxseed oil(a good source of omega-3’s) into the feeding chute while the machine is running, before juicing your wheat grass. If less oil is desired, you may brush it lightly onto the Twin Gears before assembly.
   If you do not mind wheat grass juice mixed with carrot juice, you will get maximum yield on the wheat grass juice with minimum foam by alternating wheat grass and carrot while juicing.

3. Leafy Vegetables
   To juice leafy vegetables easily, simply roll the leaf into a cylindrical shape and insert into the Feeding Chute.

CLEAN UP
Maintaining maximum cleanliness of your juicer is extremely important for both your health and the peak performance of the machine. We recommend cleaning the juicer immediately after each use, since cleaning the machine as quickly as possible is the easiest way to remove food particles. However, if you want to juice throughout the day without disassembling the machine, totally remove the Outlet Adjusting Knob, place a large bowl under both the Juice Outlet and the Pulp Discharge Outlet, turn on the machine and pour about 16 ounces of water through the machine.

1. Stains and Mineral Deposits
   Colored stains and mineral deposits on parts are normal usage signs of a product. But to remove color stains and mineral deposits.

2. Stains
   Do not use harsh chemicals such as bleach to remove food stains from the juicer.
   You can use a 25%-50% white vinegar/water solution and soak the parts overnight. This may be repeated if necessary.
   Juicing green honeydew or cantaloupe melons may also lighten the stains.
   Stains from juicing carrots may be removed by gently rubbing the stains with olive oil or canola cooking oil and a paper towel.

3. Mineral Deposits

  * Using Baking soda  

4 tablespoon of baking Soda
2 cups(16 oz) of lukewarm water

  * Soak the parts in the solution of water and baking soda overnight to loosen the mineral deposit and to remove the colored stains. Wash with soap and water and use a hard bristled brush to remove mineral deposit. Wipe with cloth to dry.
  * Mineral Deposits may be removed from the tips of the Twin Gears by running soaked almonds through the machine.
  * Another excellent way to remove mineral scales is to soak those affected parts in a pure vinegar bath overnight. This loosens the scaling and much of it can be brushed off. This process may be repeated as necessary. The vinegar used for de-scaling can be stored for reuse. Please label the storage bottle properly so that it is not accidentally used in food preparation.

2. The Screen

   • Hold the screen under running water while brushing the pulp residue from inside the screen first, and then the outside of the screen.
   • For pulp that has been imbedded firmly in the holes of the screen, try soaking the screen for a couple of hours in water after brushing away as much pulp as possible.
   • You may also try using the DULL side of a table knife to rub along the inner surface of the screen and then brushing from the outside with the Cleaning Brush.

3. The Main Body(Motor Unit)
   To clean the motor unit of your juicer, unplug your machine from the electrical outlet, position the front two legs over the edge of the sink. With either the sink top sprayer, a spray bottle filled with water, or an empty detergent bottle filled with water and equipped with its squirt-top, spray water directly onto the front plate of the juicer where the drive shaft, mounting peg and free wheel gear seats to remove pulp residue. Wipe any other exterior surfaces with a damp cloth. DO NOT SUBMERGE THE MOTOR UNIT INTO WATER AT ANY TIME.

4. Others

   • Use the narrow, pointed end of the cleaning brush to push food out through the pulp discharge outlet.
   • Dried fruits and nuts can be very sticky on the inside surfaces of the juicer. To remove the residue more easily run a couple of stalks of celery through before disassembling the machine.
   • To help the Twin Gears retain their shine, alternate between running one tablespoon of carrot pulp and one teaspoon of granulated white sugar through the machine several times.

JUICES AND DRINKS

MACHINE SET-UP FOR ALL JUICES AND DRINK RECIPES:

1. Place the Twin Gears in position
2. Use the Fine Screen
3. Tighten the Latching Arm Knobs snugly.
4. The Outlet Adjusting Knob closed.
5. Put glass Juice Pitcher under the Juice Outlet.
6. Put container under the Pulp Discharge Outlet to catch residue.

Notice: When juicing a combination of hard, fibrous vegetables such as carrots or beets and leafy greens, such as herbs or grasses PLEASE BE SURE to completely empty the Feeding Chute of all fibrous vegetables before introducing any of the leafy greens.

Citrus Blend

• 2 SMALL GRAPEFRUIT (Peeled and cut into 4 to 6 pieces)
• 3 MEDIUM SIZE ORANGES (Peeled and cut into 4 pieces)
• ½ SMALL LEMON (Peeled and cut into 2 pieces)
• ½ SMALL LIME (Peeled and cut into 2 pieces)

Note:

1. For sweeter taste – use less lemon and lime
2. It is not necessary to peel the lemon or lime.

Apple Lemonade

• 3 FIRM APPLES (YELLOW DELICIOUS, PIPPIN, OR GRANNY SMITH, Cut into 6 pieces)
• 3 MEDIUM SIZE ORANGES (Peeled and cut into 4 pieces)
• ½ LEMON (Peel is optional for sweeter flavor)

Wheat Grass Delight

• 4 HANDFULS WHEAT GRASS
• 4 CARROTS (Cut in 2 to 4 pieces)
• 1 FIRM APPLE (Cut into 6 pieces) THIN SLICE GINGER

Ambrosia Nectar

• 2 BUNCHES GRAPES
• 3 APPLES (YELLOW DELICIOUS, GRANNY SMITH,OR PIPPIN – Cut into 6 pieces)
• 1 KIWI (Peeled and cut into 2 pieces)
• 1 SLICE HONEYDEW (Cut into cubes)
• 1 SLICE PINEAPPLE (Cut into cubes)
• 1 WHOLE LEMON (Peeled and cut into 4 pieces)
• ½ CUP CRANBERRIES

Method:

1. Alternate juicing grapes, kiwi pieces, melon cubes, pineapple cubes, apple pieces and cranberries
2. Juice lemon separately and add to taste
   Note: Quantities of ingredients may be varied with good results Do not be afraid to experiment according to your own taste

Watermelon Quench
Watermelon with seeds – If organically grown, add rind also

Method:

1. Slice watermelon into pieces that fit easily into the feeding chute of the juicer.
2. Juice & enjoy on a hot summer day

Mellow Melon Punch

• ¼ CANTALOUPE (cut into cubes)
• ¼ HONEY DEW (cut into cubes)
• 2 Slices WATERMELON (cut into cubes)
• Juice all together and enjoy

Snappy Apple

• 7 APPLES (FUJI, GRANNY SMITH, YELLOW DELICIOUS – Cut into 4 to 6 pieces)
• ½ JALEPENO PEPPER
• ¼ LIME
• 1 KIWI (Peeled and cut into 2 pieces)

Method:

1. Juice Kiwi and Lime first
2. Next juice Jalepeno
3. Finish by juicing the Apples

Dr. Walker’s Choice (#61)

• 10 oz. CARROTS (Cut into 4 pieces)
• 6 oz. SPINACH (FRESH)

Method:

1. Juice spinach first
2. Juice carrots

Green Tang

• 2 PINEAPPLE WEDGES (Cut into smaller pieces)
• 1 SPRIG MINT
• 3 HANDFULS WHEAT GRASS
• ¼ LEMON
• 1 SLICE GINGER FOR FLAVOR

Method:

1. Juice wheat grass
2. Juice the mint
3. Juice lemon
4. Juice pineapple cubes

Note: Pineapple wedge is a 1〃round slice of whole pineapple cut into quarters (4 pieces). If pineapple is not organically grown, remove the outer skin before juicing

Oriental Express

• 3 LEAVES NAPA CABBAGE – Cut lengthwise
• 4 STALKS BOK CHOY WITH LEAVES – Cut lengthwise
• 2 STALKS ANISE (FENNEL) with GREEN STEM and LEAVES
• 6 MEDIUM CARROTS (Cut into 4 pieces)
• 2 APPLES (YELLOW DELICIOUS, FUJI, OR GRANNY)
  Cut into 4 to 6 pieces

Method:

1. Juice Napa, Bok Choy and fennel first
2. Juice Apples second
3. Juice Carrots into the rest of the juice

BREAD STICKS AND MOCHI (RICE CAKE)

MACHINE SET-UP:

1. Place the Twin Gears in position
2. Use the Rice Cake Blank (Total Blank) instead of Screens
3. Put the Pulp Discharge Casing into position
4. Tighten the Latching Arm Knobs snugly
5. Remove the Outlet Adjusting Knob from the Pulp Discharge Outlet and replace it with the Rice Cake Guide
6. Put a plate under the Rice Cake Guide

Rye Bread Sticks

• 2 CUPS RYE (SOAK OVERNIGHT)
• ½ CUP SUNFLOWER SEEDS (SOAK OVERNIGHT)
• 2 TBSP CARAWAY SEED
• ½ TSP SEA SALT

Method:

1. Mix all ingredients together in a bowl
2. Feed into machine a little at a time
3. Collect bread sticks as they emerge from the Pulp Discharge Outlet formed into bread sticks by Rice Cake Guide
4. Before drying, these sticks can be shaped into pretzels, braided together, etc. for a variety of shapes
5. Dry in the dehydrator until crisp. Can be served with dips, soups, etc.

Mochi (rice cake)

• 2 CUPS STEAMED RICE (Medium Grain Rice recommended)
• 1 TSP EXTRA VIRGIN OLIVE OIL

Method:

1. Prepare steamed rice
2. Add olive oil into the Feeding Chute while running the machine
3. Feed your steamed rice into Feeding Chute
4. Collect rice cake coming out of the Rice Cake Guide onto a plate
   Note: Before processing, mix spices such as minced garlic or onion with the rice to flavor your rice cake. Slice the rice cake into diagonal slices. Dehydrate them and add to your soup.

PASTA AND NOODLES

MACHINE SET-UP:

1. Remove the Pulp Discharge Casing from the Twin Gear Housing
2. Remove the Twin Gears and insert the Pasta Screw onto the motor drive shaft (left side as you are looking into the body)
3. Place the Pasta Guide over the Pasta Screw, making sure the long side of the Pasta Guide faces to the left side
4. Select the pasta shape desired from the two shapes available on the Pasta Screen and fit it onto the Twin Gear Housing. (see diagram on page 16)
5. Tighten the Latching Arm Knobs snugly
6. Place a plate under Pasta Screen

Pasta

• 1 PACKAGE READY MIX PASTA DOUGH
• 1 TSP EXTRA VIRGIN OLIVE OIL

Method:

1. Prepare pasta dough according to the instructions on the package of the pasta dough mix
2. Put a few drops of olive oil into the Feeding Chute while running the machine
3. Feed your pasta dough into Feeding Chute
4. Collect your pasta onto a plate

Variations:
If you use carrot juice when preparing the dough you will get red pasta. Use kale juice for green pasta and water for plain pasta.
Note: A whistling sound will occur in the beginning; however, it will disappear later when your pasta comes out.

PATE AND CROQUETTES

MACHINE SET-UP:

1. Place the Twin Gears in position
2. Use the Homogenizing Blank
3. Put the Pulp Discharge Casing into position
4. Tighten the Latching Arm Knobs snugly
5. Tighten the Outlet Adjusting Knob
6. Place a bowl under the Juice Outlet

Cashew-Curry Croquettes

• 2 CUPS CASHEWS
• 1 CUP SPROUTED WHEAT (Soak for 12 hours and let small tips emerge by sprouting)
• 3 TBSP CURRY PASTE (Available from Gourmet Food Shops)
• 1 TSP VEGE-SALT TO TASTE

Method:

1. Put the cashews and sprouted wheat berries into the Feeding Chute.
2. Add curry paste and vege-salt a little at a time while texturizing
3. Collect the texturized mixtures from the Pulp Discharge Outlet
4. Mix together by hand or with a wooden spoon
5. Form into croquettes and garnish with tomatoes, radish and cucumber

Pecan Pleasers

• 2 CUPS PECANS
• 1 CUP SPROUTED WHEAT BERRIES (Soak 24 hours)
• ¼ CUP SPANISH ONION
• 1 TSP POULTRY SEASONING
• ½ TSP VEGE-SALT

Method:

1. Put pecans, wheat berries, and onion into the Feeding Chute
2. Collect mixture in a bowl
3. Add the poultry seasoning and vege-salt
4. Mix thoroughly by hand or with a wooden spoon
5. Shape into small wafers and serve on cucumber slices with tomato or avocado on top

SOUP

MACHINE SET-UP:

A. To Juice Carrots, Lemon, And Apple

1. Place the Twin Gears into position
2. Use the Fine Screen
3. Tighten the Latching Arm Knobs snugly

B. To Grind Beets And Scallions

1. Place the Twin Gears into position
2. Use the Homogenizing Blank
3. Tighten the Latching Arm Knobs snugly

Beet Borscht

JUICE- A

• 1 APPLE – Cut into 4 to 6 pieces
• 8 CARROTS – Cut into 4 lengthwise pieces if the carrot is thick
• 1/2 LEMON – Cut into 2 pieces

GRIND – B

• 2 BEETS
• 2 GREEN SCALLIONS
• 1 CUP FINELY SHREDDED CABBAGE AVOCADO-YOGURT

Method:

1. Juice carrots, lemon, and apple. Keep juice in a glass or the Juice Pitcher
2. Remove the Fine Screen and replace with the Homogenizing Blank tog rind beets and scallions into a separate bowl
3. Add ground beets and scallions to the carrot, lemon and apple juice and mix
4. Fold in the finely grated cabbage
5. In a blender- blend avocado and yogurt together

To serve:
Place borscht in a bowl. Top with a dollop of the avocado – yogurt combination

DESSERT

MACHINE SET-UP:

1. Place the Twin Gears in position
2. Use the Homogenizing Blank
3. Put the Plup Discharge Casing into position
4. Tighten the Latching Arm Knobs snugly
5. Tighten the Outlet Adjusting Knob
6. Place a bowl under the Juice Outlet

Cashew Poppy

• 1 CUP SPROUTED WHEAT BERRIES – Soak for 12 hours and let small tips emerge by sprouting
• ¼ CUP POPPY SEEDS
• ¼ CUP SUNFLOWER SEEDS -SOAKED
• 1 CUP CASHEWS
• ½ TSP VANILLA
• 4 TBSP HONEY

Method:

1. Mix wheat berries (soaked), sunflower seeds (soaked), cashew and poppy seeds together then grind through the machine
2. Collect the ground mixture from the Juice Outlet into a bowl
3. Add vanilla and honey and mix
4. Roll into balls and place on a plate

Uncooked Banana- Blueberry Ice Cream Pie

• 1 CUP SOAKED ALMONDS
• ½ CUP SESAME SEEDS
• 1 CUP CASHEWS
• ½ CUP RAISINS
• ½ CUP PITTED DATES
• ½ CUP PECANS
• 1 TSP VANILLA
• 2 TBSP HONEY
• 7 FROZEN BANANAS (WITHOUT SKINS)
• 1 ½ CUPS FROZEN BLUE BERRIES
• 1 KIWI (SLICED)
• 2 LARGE STRAWBERRIES (SLICED)

Method:

1. Grind almonds, cashews, sesame, pecans, dates and raisins together
2. Mix in the vanilla and honey; knead to form dough: then press into a 9〃pie dish to forma  crust. Let crust sit for 3 to 4 hours or place in a food dehydrator for about 3/4 hour.
3. Grind frozen bananas and frozen blueberries together to make ice cream.
4. Put ice cream into the crust, top with slices of strawberries and kiwi. Slice and serve.

PRODUCT STANDARD

ELECTRICITY RATING

| USA Models : 120Vac, 60Hz, 180W
EUROPE/ASIA : 230Vac, 50Hz, 120W
SIZE| 505mm x 195mm x 320mm
WEIGHT| 9.8kg / 34lbs

V0911 GSGOLD
UUpdated in September, 2011
This version supersendes all former manuals issued before this date.

References

• Domenet er parkert

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>