Metoluar WS3030-BRC-QX Professional Wireless Weather Station with APP User Manual
- June 15, 2024
- Metoluar
Table of Contents
Metoluar WS3030-BRC-QX Professional Wireless Weather Station with APP User Manual
Function Declaration
Professional Weather Station with Bluetooth, mobile APP function, the device carries a one-year data storage function, which can be read through the PC software.
Descriptions ：
-
Calendar : Date display format is YY-MM-DD、MM-DD- YY、DD-MM-YY（User chooses to set up）
-
Clock display: Time display format can be customized, set to 12 hours or 24 hours.
-
Time setting: Open the APP and allow bluetooth to be turned on, search for the product WS XXXX — XXXX name, and the bluetooth symbol will immediately appear in the upper left corner of the indoor machine, and automatically synchronize the current mobile phone time within 10 seconds.
-
Alarm function : BI BI alarm sound to achieve the effect of reminding the user, alarm bell ring for 2 minutes, if cancel alarm ring ,The sound can be cancelled by pressing any key.
-
Wireless 433MHz transmission: The receiving distance between indoor machine and outdoor transmitter is 100 meters effective, and the data transmission frequency is 40 seconds/time.
-
Indoor and outdoor humidity display: Relative humidity ranges from 20% to 99%.
-
Indoor and outdoor temperature display: The display unit can be set at ℃ or ℉ (user-defined setting), the indoor temperature range is 0℃ to 60℃, and the outdoor temperature range is -40℃ to 60℃.
-
Wind speed: User can set display wind speed units，can independently set the wind speed high alarm value, the display unit can be set to m/s、km/h、mph、knots or bft，scope:0m/s~50m/s.
-
Wind direction: The wind direction is shown as E,S,W,N,SE,NE,SW and NW.
-
Rainfall : Rainfall can be displayed by 1H, 24H, week, month, year, display unit can be set to mm or inch (user can customize Settings); The total rainfall is 0 ~ 9999mm.
The APP can set the alarm value of high hourly rainfall within the range of 0mm~400mm. -
Pressure : Absolute value of atmospheric pressure, display unit can be set as hpa or Inhg or mmhg (user-defined Settings), pressure range from 300hpa to 1100hpa.
-
Pressure trend chart: The pressure trend shows the 24-hour change trend.
-
Weather forecast cloud map: It can display the corresponding ICONS of sunny, cloudy, cloudy and rainy states and weather trend.
-
Indoor low voltage detection: When the display symbol of low voltage flashes, prompt the user to replace the battery (indoor battery voltage is low about 3.2V).
-
Power supply mode of indoor receiver: Alkaline battery 3*AA 1.5V, battery life of more than 2 months (battery capacity determines the use time).
-
Indoor receiver can be external power supply: USB power supply, DC block products can also be DC power supply, DC 5V/500mA.
-
Buzzer : The alarm function of all weather data can be set independently. Users can set the upper/lower limit within the range of design parameters.
-
Local data storage: Can store meteorological data for up to 1 year. Can connect with PC via USB and use our company’s supporting software （SmartWeather ） Data access.
-
Indoor and outdoor connection: First install the batteries, outdoor transmitter and indoor receiver battery, the sensor signal, the outdoor transmitter began to search in the search process, the signal icon will always shine, search to the outdoor icon after static data, such as: 3 minutes after a failed search icon disappear,( disappear after touching any host keys, continue to open search pattern), to ensure the effective distance of 100 meters open place, in the process of search, please don’t to make any operating the indoor receiver.
-
Key operation
-
In power-on MODE, press MODE button for 3s seconds to enter the key setting MODE. At this time, the screen time data flashes, indicating that the key setting MODE has been entered.
-
In the key cycle setting MODE, press the MODE key for function cycle setting, such as: switching time MODE, date setting MODE, temperature settingMODE, air pressure settingMODE, etc.
-
In the cyclic setting mode, press NEXT to set different digits in this mode, such as switching from hour to minute. When setting relevant parameters, the data flashes, and you can press +/- to set the data to increase or decrease.
-
In temperature setting mode, press NEXT to switch between units, alarm, upper and lower limits, etc., and press +/- to increase and decrease data, and to turn alarm on and off, etc. (note: when setting alarm, press SET to turn alarm on and off.)
-
Historical data search: Press SET/HISTORY button for 3 seconds, and when the cache icon on the product flashes, press +/- to browse the data, and 48 pieces of data are stored on a normal day.
For example: Only turn on the machine for 1 hour to browse the data for 2 pieces data, start to turn on a day, and so on. -
After setting related parameters, long press MODE key above 3s to exit the setting MODE, or wait for more than 2 minutes, and the product will automatically exit the setting MODE.
PC software operation
PC data download software link site
：http://app.meteorologyhk.com:8080/pcsoft/
Click after downloading the software successfully
After running the program, jump out of the following operation interface.The
diagram below:
APP operation
APP running environment
1.1 IOS run environment compatible version
Adapt to iOS 8.0 and above.
2.1. The android version
Adapt to android 5.1 and above systems.( iPad are not supported)
3.1.Download and install the APP:
3.1.1 Scan the QR code on the instruction manual or color box, download and
install the APP。
3.1.2 After the installation is complete, open the APP to allow bluetooth to
be turned on, allow to open the phone positioning, and allow reading device
storage.
(APP startup interface)
3.1.3 After launching the screen, display the main screen and click the top
left corner（ ）Set the
button, as shown in the figure below:
3.1.4 Bluetooth mobile Settings: Click Available Devices to enter the
（Available Devices ） interface, as shown in the figure below:
3.1.5 Click （Search） in the upper right corner of the Available Devices
interface to enter .
Search interface and Search the product name –（WS xxx-xxxx）, as shown in the
figure below:
3.1.6 Bluetooth connection and time synchronization:
Search the product model, click the model, and the Bluetooth icon will appear
on the product.
Click （Send）After the configuration is successful, time will be synchronized
with the mobile phone in about 10 seconds.
3.1.7 After the configuration is successfully connected, the APP will jump
back to the Available
Devices interface, as shown in the figure below:（Available Devices interface）
3.1.8 Click the product name connected in the list of Available Devices to
jump to the main interface
3.1.9 Jump to the main interface without data，click ，Select iCloud Setting,
then Save, and then return to the main interface (note: data can only be
accessed from the APP after the product is connected to the Internet and
powered up for more than 30 minutes).
3.2.0 Click the historical data icon to enter the historical data interface.
You can choose to check
the historical data from January to June. 
(main interface of APP after successful connection)
4.1 The unit setting
Click Uints Setting，the user sets the unit according to the actual needs, as
shown in the figure below:
Each data unit is displayed with the first unit value as the default unit of
the system, and users can freely set and select the unit according to
requirements.
Click the upper-left icon to exit, as shown above:
5.1 Alarm setting
Click Alarm Setting, and the user sets the upper and lower limits according to
the range of design parameters, such as temperature: 0℃~ 60℃(32℉~ 140℉). After
setting the alarm value, click the save icon in the upper right corner to
exit.
In the Alarm Setting interface, various Alarm history data can be viewed.
Click the upper right corner — — .
6.1 The alarm clock Settings
Click Alarm Clock Setting, and the user can set the Alarm according to actual
needs: No set, Everyday, Weekend and workdays. After Setting the Alarm, click
save icon in the upper right corner to exit.
Assembly instructions（the following two transmitters can be selected for matching）：
TX4050A-0
TX4050A-1
Product parameters
（一）Receiver
- Temperature range: 0 ℃~60 ℃(32℉~140℉), resolution: 0.1℃, accuracy: ±1℃.
- Humidity range: 20%~99%, resolution: 1%, accuracy : ±5%.
- Pressure range: 300-1100hpa, resolution: 0.1 hpa, accuracy: ±3 hpa.(700-1100 hpa interval)
- Alarm clock: lasts 2 minutes.
- Working voltage: 3* AA1.5V voltage.
- Battery life: About 6～12 months (battery quality and capacity determine the service time of the product).
- External DC power supply or MINI USB power supply, DC block products can also supply DC power: DC 5V/500mA.
- Low voltage detection: Battery icon flashes (battery voltage is lower 3.2V).
Transmitter
9. Temperature range: -40 ° C ~60 °C (-40 ° F ~140 °F), resolution: 0.1 ° C,
accuracy: ±1 ° C.
10. Humidity range: 20%~99%, resolution: 1%, accuracy rate: ±5%.
11. Wind speed range: 0~50m/s, resolution: 0.1m /s, accuracy : 1 m/s (at wind
speed <10m/s).
12. Rainfall range: 0~9999mm, rainfall resolution: 0.4mm(rainfall <1000mm),
1mm(rainfall >1000mm).
13. Data update: 40 seconds/time.
14. Working voltage: 2* AA1.5V voltage.
15. Battery life: Over 6～12 months.
16. Low voltage detection: Battery icon flashes (battery voltage is less than
2.4 V).
17. Waterproof level: IPX3
Attention
-
When the battery appears low voltage warning, it will cause flashing alarm, touch the button does not work, data received signal, please replace the battery in time.
(Indoor machine: battery voltage is lower than 3.2V or so.
Outdoor machine: battery voltage is lower than 2.4V or so) -
No outdoor transmitter data can be received: Outdoor confirm product range, 433 MHZ wireless transmission to 100 meters can be measured without interference without sunscreen, check the battery, whether on the indoor and outdoor battery symbol flashing said electricity shortage, check whether outdoor fire board 40 seconds lamp shining time, RAIN and WIND line check board is wrong, not receive data in 3 minutes, power electricity repeated check.
-
Products and mobile phone time synchronization Settings: Open the APP, allowed to open the bluetooth, search to the product model click enter, see the product on the upper left corner will appear immediately bluetooth ID, with mobile phone for 10 seconds time synchronization,
-
APP operation: Scan the QR code on the instruction manual or color box — select download APP– install APP– open APP to enable bluetooth — search product model and confirm — check the current data after connection. (open the APP to allow bluetooth to be turned on, allow to open the phone positioning, and allow reading device storage.)
-
The time zone is different, and the time difference adjustment method is as follows:
The current mobile phone time is synchronized immediately after the bluetooth connection is successful. If there is a time zone difference of 1 hour, press the product MODE key for 3 seconds, press the Next key when the time display flashes, Pull out to the time zone and see the 08 character display, if the difference is 1 hour press + or – adjust for 1 hour, press MODE key for 3 seconds to exit, the setting was successful after the power was cut off and the power was turned on again. -
Outdoor solar power energy description: Solar panels do not charge the battery, when the solar panel collects enough electricity, to provide electricity to the transmitter to increase the battery life for a long time.
Tkm220805
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>