serien Propeller Ceiling Suspension Fan Lamp Instruction Manual
- June 4, 2024
- serien
Table of Contents
serien Propeller Ceiling Suspension Fan Lamp Instruction Manual
Inductions
mm
| 
---|---
kg|
5,7
|
max. 116W E27 Glühfadenlampen; filament bulbs Motor max. 16W
|
Assembly Instructions
Before assembling the luminaire, turn off the power at the mains!
Remote control with learn function
The remote control is equipped with a learning frequency function. The frequencies can be changed in order to prevent interference with other radio frequencies. For a change of the factory settings please proceed as follows:
-
Please use a small-sized tool to move the sliding switch in the back part of the battery compartment of the remote control.
-
Please connect the Propeller to the mains voltage (e.g. by a wall
switch) and press the “OFF” button within 30 seconds for at least 5 seconds. -
After completing the steps above, please check the product functions. If the Propeller is not responding to the remote control, please disconnect it from mains. Please repeat steps 2 and 3.
Note: When the system is saving the frequency change, please do not press any other buttons.
Backside
Functions
- Forward /backward motion
- Indication of up/down
- Fan on, six-step speed control
- Indication of speed level
- Fan off
- Fan automatically change fan speed to make the natural wind.
- Light On/Off,
- Battery: please exchange battery if battery sign is flashing
Support
Design Yaacov Kaufman
serien Raumleuchten GmbH
Hainhäuserstr. 3-7 D-63110 Rodgau
www.serien.com
