NTAYDZSW TQ-103 Hand Held Garment Steamer Instruction Manual

NTAYDZSW TQ-103 Hand Held Garment Steamer

Product Information

Specifications

• Model : TQ-103

Product Usage Instructions

The TQ-103 is a heating device that is designed to produce steam. To ensure optimal performance and prolong the product’s lifespan, please follow the usage instructions below

Initial Use

1. Before using the TQ-103 for the first time, ensure that all packaging materials have been removed.
2. Place the device on a stable and heat-resistant surface.
3. Connect the power cord to a suitable power outlet.
4. Press the power button to turn on the device.
5. Wait for the device to heat up, which may take a few minutes.

Regular Use
To use the TQ-103 for heating and steam production

1. Fill the water reservoir with clean, distilled water. Do not overfill; follow the maximum fill line indicated.
2. Close the water reservoir securely.
3. Press the heating button to initiate the heating process.
4. Wait for the device to heat up and produce steam. This usually takes a few minutes.
5. You can now use the steam for your desired purposes.

Cooling Down and Prolonging Service Life
To ensure a longer service life of the TQ-103, it is recommended to follow these cooling down instructions

1. After each heating cycle that lasts for 20 minutes, allow the device to cool down for at least 10 minutes before using it again.
2. During the cooling down period, make sure the device is placed on a heat-resistant surface away from any flammable materials.

Frequently Asked Questions (FAQ)

Q: After two or three uses, the machine fails to heat up and produce steam. What should I do?
A: If the machine fails to heat up and produce steam after a few uses, please check the following

• Ensure that the power cord is securely connected to a functioning power outlet.
• Check if the water reservoir is properly filled and closed.
• If the issue persists, please contact our customer support for further assistance.

Q: Can prolonged use of the device for heating lead to a short product life?
A: Yes, prolonged use of the device for heating can potentially shorten its lifespan. To avoid this, it is important to follow the recommended cooling down period after each heating cycle.

Q: How can I prolong the service life of the TQ-103?
A: To prolong the service life of the TQ-103

• Allow the device to cool down for at least 10 minutes after each heating cycle that lasts for 20 minutes.
• Do not exceed the maximum fill line when filling the water reservoir.
• Regularly clean and maintain the device according to the instructions provided in the user manual.

Dear User : In order to handle this machine properly, please read the instruction book carefully. This product is only available for sale and use in Chinese mainland.

Component

The real product may change due to technological upgrade, appearance improvement and functional optimization. Please understand the picture only supplies the reference.

Precautions

1. lf the power cord is broken, it must be replaced by the Maintenance Department of manufacturer or professionals to avoid a hazard.
2. Please pay attention to the steam splashing while using the machine.
3. Unplug the appliance during filling and cleaning
4. This machine is available for ironing wrinkled cloths, curtness well osmose of fabrics. Please read the material tag of each cloth lo check oul whether it is available for ironing, because some of materials, such as leather, leatherette or velvet, are not available for it.
5. Have a test on a fraction of clothing to see whether It causes damages. If not, use it at ease.
6. Check out the back of clothing for air permeability to avoid being well by the gathering of steam.
7. Check out the pocket of clothing to make sure nothing inside.
8. Check out the back of clothing to see whether there Is something that can be easily damaged by steam.
9. Don’t iron the area around metal accessories since high-temperature steam can lead to discoloring or rusting.
10. When turning up the steam switch, it is 11ormal to see it vibrating with light buzzing.
11. lf the buzzing becomes louder and with no steam coming out, it means there Is not enough water In the water tank. Please check out the water level and add some if necessary.

Before Each Use
Remove stuffs on the machine; Unwind and straighten the power cord In order to avoid circuit overload, it is recommended to use it in a separate socket.

Operation and Ironing

1. How to fill water: Q) Pull out the plug of water tank. (Picture 1)

2. Fill the water tank with purified ‘Nater or distilled water and ensure the water occupies at least 113 room of the tank.

3. Replace the plug and put the waler tank back into the machine. (Picture 2).
   

4. Preheat for 20 seconds when the light indicator on and turn on thesteam switch when the light off. Then spray the steam for 15 seconds in the air, which helps remove possible residue and strange smell inside the machine.

5. Turn on the steam switch when the power, indicator off and then from the nozzle comes out steam. Then you can start to iron clothes.

6. Skills for Ironing

7. Hang the wrinkled article of clothing well and smooth down the wrinkled cloth with one hand and handle the machine with the other.

8. Turn on the steam switch ;;,ml press the steam head against the garment and move it from top to bottom.

After Each Use

1. Empty the water out of the lank and turn on the steam switch to remove the remaining water and spray it into the air.
2. Turn off the steam switch and then pull out the power plug.
3. Put the machine on a flat table and store It properly after cooling down.

Skills for Ironing

1. Hang the wrinkled article of clothing well and smooth down the wrinkled cloth with one hand and handle the machine with the other.
2. Turn on the steam switch and press the steam head against the garment and move it from top to bottom

Tips

1. It is inadvisable to put the cloth ironed back to the closet al once since the residual steam will render it mildew. Hang your clothes outside for a period before storing.
2. Clothes can be easily wrinkled after ironing.
3. Clothes should be kept at appropriate intervals or they will get wrinkled.

Malfunctions and FAQ

The above is the malfunctions analyses and solutions. If there still exist malfunctions or other problems, please contact our After-sales Service Department or send the machine to the after-sales outlets of our company. Do not dismantle and repair the machine by yourself.

Product Specification

Electrical Schematic Diagram

Documents / Resources

| NTAYDZSW TQ-103 Hand Held Garment Steamer [pdf] Instruction Manual
TQ-103, TQ-103 Hand Held Garment Steamer, Hand Held Garment Steamer, Held Garment Steamer, Garment Steamer, Steamer
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>