SereneLife SLBSKBG90 Dual-Shot Basketball System User Guide

SereneLife SLBSKBG90 Dual-Shot Basketball System

IMPORTANT!
PLEASE READ THESE ASSEMBLY INSTRUCTIONS IN THEIR ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT.

WARNING:
CHOKE HAZARD: THIS TABLE CONTAINS SMALL BALLS AND PARTS NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE.

WARNING:

1. Require 3pcs AA Batteries (Not included).
2. Do not mix old and new batteries.
3. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.

PARTS LIST

PARTS IDENTIFIER

ASSEMBLY INSTRUCTIONS

1. Find a clean, level place to begin the assembly of your Basketball Game. We recommend that two adults work together to assemble this basketball game.

2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the Parts List. Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work surface. FIG. 1 & 2

3. Attach the Board Tubes (#2) to the Left Tube (#3) and Right Tube (#4) using a spring lock as shown in FIG.1.

4. Attach the Support Tubes (#7) to the Mounting Tubes (#8) using a spring lock as shown in FIG.2

5. Attach the Left L Tube (#5) and Right L Tube (#6) together using spring lock as shown in FIG.3

6. Attach the Left and Right L Tubes (#5 and #6) to Left and Right Tubes (#3 and #4) using Bolts(#26), Washers (#22), and Nuts (#27), and then attach the Left and Right L Tube (#5 and #6) to the Mounting Tube (#8) using Bolts (#26), Washers (#22) and Nuts (#27) as shown in FIG. 4 A & 4B.

7. Attach the Support Tube and Mounting Tube (#7 and #8) to the Board Tube (#2) using Bolts (#24), Washers (#22), and Nuts (#27) as shown in FIG. 4C, repeat this step for another side.
   Note: Make sure the spring lock is face down.

8. Attach the Horizontal

   • Tube (#12) to the Board
   • Tube (#2) using Bolts(#24),
   • Washers (#22) and Nuts
   • (#27) as shown in FIG5. Then insert the Board L Tubes
   • (#1) to the Board Tube (#2) as shown in FIG.5.

9. Attach the Ramp Tubes (#9) to the Left and Right L Tubes (#5 and #6) using Bolts (#32), Washers (#22) and Nuts (#27) as shown in FIG 6.

10. Attach the Ramp L Tubes (#10) to Ramp U Tube (#11) using spring lock, and then place the Ramp L Tube (#10) to the Ramp Tube (#9) using spring lock as shown in FIG.7.

11.  Attach the Rim Assemblies (#17) and Rim Support Plates (#18) to the Backboard (#21) using the Bolts (#23), washers (#22), and Nuts (#27). And then attach the Switch Sensor (#15) to the Backboard (#21) using the Bolts (#23), washers (#22), and Nuts (#27). Make sure that you use a washer on both sides of the backboard as shown in FIG. 8.

12. Attach Electronic Scorer Face Plate (#30) to the Backboard and connect with the Electronic Scorer (#14) using Bolts (#29) as shown in FIG. 9.

13. Slide elastic straps and sleeve of Ball Ramp with Side Netting (#13) onto Board Tubes as shown in FIG. 10A & 10B & 10C.

14. Slide the Horizontal Tube (#12) in front of the Ball Ramp with Side Netting (#13) and attach it to the Ramp U Tube (#11) using Bolts (#24), Washers (#22) and Nuts (#27) as shown in FIG.10D.

15. With the help of another adult, Attach the Backboard (#21) to the Board Tubes (#1) using Bolts (#25), Washers (#22), and Nuts (#27) as shown in FIG.11 A.
    At each bottom hole of the backboard, attach the ramp tabs of Ball Return with Netting (#13) using Bolts (#25), Washers (#22), and Nuts (#27) as shown in FIG.11 B.

16. Insert the Lock Pins (#33) to the Left and Right L Tubes (#5 and #6) as shown in FIG. 11 C.

17. Connect the Sensor Wire of the Switch Sensor to the Electronic Scorer (#14) as shown in FIG. 12. Connect the Control Wire (#37) to the Electronic Scorer (#14) as shown in FIG.12 and 12A.

18. Attach the Control Box (#36) to the middle of the Ramp U Tube (#11) using two Bolts (#38) as shown in FIG.13 A.

19. Run the rest of the Control Wire (#37) through the loops on the Ball Return with Side Netting (#13) and plug it into the Control Box (#36). Place the Control Wire (#37) on the Ramp U Tube (#11) using the Self-Stick Straps (#37) as shown is FIG.13 B.

20. Folding position when not in use during the basketball game and insert the Lock Pin (#33) as shown in FIG 14.
    Note: The lock pin (#33) needs to be removed from its original position when the game is being used before insertion to the new position when folded .

ELECTRONIC SCORER OPERATION

Installing Batteries:
Using a screwdriver, unscrew the lid and open the battery box. Insert 3 “AA” batteries (not included) in the order of polarity as shown on the inside cover. Close the cover and tighten the screw. Turn the power ON using the ON/OFF switch. if the game will not be used for a long period of time, we recommend that the batteries should be removed.

CONTROL BOX OPERATION

• Press “ON/OFF” to activate the scorer.
• Scoreboard “HOME” shows “01” (pre-set game 1).
• Press “SELECT UP and DOWN” to select a game.
• Press “SELECT UP and DOWN” to enter the selected game mode.
• Press “SOUND” to switch the sound ON/OFF while playing.
• Press “PAUSE” to pause or start time counting.
• Press and hold the button “ON/OFF” for 3 seconds to turn off scorer.
• Press and hold the button “RESET” for 3 seconds to reset the games.

Note: If no shot is made or no button is pressed in 15 mins, the scorer will be turned off automatically.

CHOOSE FROM 8 DIFFERENT GAME OPTIONS

1. Beat the Time Clock
   • Press “PLAY” to enter game 1.
   • Press “UP/Down” to select single/multiple players (P1/P2/P3/P4).
   • Press “PLAY” after the number of players is selected.
   • Press “UP/Down” to select playing time, 30/45/60 seconds.
   • Press “PLAY” to begin the game.
   • Scoreboard “HOME” shows Player 1, 3; Scoreboard “VISITOR” shows Player 2, 4.
   • All shots are worth 2 points until the last 10 seconds, each score counts 3 points.
   • Count down 5 seconds to the next player’s turn when one player finishes the game.
   • The player with more points scored wins (LED will flash on a player with a higher score).
   • Press “PLAY” to restart this game.
2. 3 Point Beat the Time Clock
   • Press “PLAY” to enter game 2.
   • Press “UP/Down” to select single/multiple players (P1/P2/P3/P4).
   • Press “PLAY” after the number of players is selected.
   • Press “UP/Down” to select playing time, 30/45/60 seconds.
   • Press “PLAY” to begin the game.
   • Scoreboard “HOME” shows Player 1, 3; Scoreboard “VISITOR” shows Player 2, 4.
   • All shots made count 3 points.
   • Count down 5 seconds to the next player’s turn when one player finishes the game.
   • The player with more points scored wins (LED will flash on a player with a higher score).
   • Press “PLAY” to restart this game.
3. Battle Back
   • Press “PLAY” to enter game 3.
   • Press “UP/Down” to select playing time, 30/45/60 seconds.
   • Press “PLAY” to begin the game.
   • Shot made in “HOME” frame, +2 points scored display on “HOME” board and -2 points for “VISITOR”.
   • Shot made in “VISITOR” frame, +2 points scored display on “VISITOR” board and -2 points for “HOME”.
   • Once a player scores 10 points who wins and the game is finished?
   • Press “PLAY” to restart this game.
4. Horse
   • Press “PLAY” to enter the game.
   • Press “UP/Down” to select multiple players (P2/P3/P4)
   • Press “PLAY” after the number of players is selected
   • The Player has to make a shot in 2 seconds.
   • The First player is allowed to shoot at any hoop (Home or VISITOR). If the first player scores in 2 seconds, no letter is given. The game continues for the next player.
   • The scoreboard will display “next player (P2P3/P4)” and LED will flash twice in a second. After the flash, the next player has to duplicate the shot in the same hoop selected by the first player.
   • If a player can’t score in 2 seconds, the player receives the first letter “H” which will display on the scoreboard. The game remains for the same player until the player scores. If a player keeps missing, the player receives “O” followed by “R”, “S”, and “E”. The letter “E” is given, and the player is out.
   • The first player to spell “horse” loses. Players stay in repeat step d.e.f. till the game is finished
   • The last player to spell “horse” wins
   • Press “PLAY” to restart this game
5. Check Point
   • Press “PLAY” to enter game 5.
   • Press “UP/Down” to select single/multiple players (P1/P2/P3/P4).
   • Press “PLAY” to begin the game.
   • “HOME” displays “player”, “VISITOR” displays “24” points, pre-set 40 seconds playing time.
   • Points scored will display on the scoreboard “HOME”.
   • Before time is out, once 24/52/68/86 points are scored, playing time increases 10/20/10/20 seconds respectively
   • Count down 5 seconds to the next player’s turn when one player finishes the game.
   • The player with more points scored wins ( LED will flash on a player with a higher score)
   • The game is finished when a player scores 99 points
   • Press “PLAY” to restart this game
6. Around the World
   • Use tape to mark the shooting lines.
   • Press “PLAY” to enter game 6.
   • Press “UP/Down” to select single/multiple players (P1/P2/P3/P4).
   • Press “PLAY” after the number of players is selected.
   • Scoreboard “HOME” displays Player 1/2/3/4, and “VISITOR” displays scored points.
   • Once the score comes to 14 points or time comes to 99 seconds countdown 5 seconds to the next player’s turn when one player finishes the game.
   • The player who finishes the game first wins (LED will flash on the winner).
   • Press “PLAY” to restart this game.
7. Left and Right shoot
   • Press “PLAY” to enter game 7.
   • Press “UP/Down” to select single/multiple players (P1/P2/P3/P4).
   • Press “PLAY” after the number of players is selected.
   • Press “UP/Down” to select playing time, 30/45/60 seconds.
   • Press “PLAY” to begin the game.
   • Scoreboard “HOME” displays Player, and “VISITOR” displays points.
   • Make a shot in the “HOME” frame when LED is flashing on “HOME”, 2 points scored display on “HOME”.
   • Make a shot in the “VISITOR” frame when LED is flashing on “VISITOR”, 2 points scored display on “VISITOR”.
   • Count down 5 seconds to the next player’s turn when one player finishes the game.
   • The player with more points scored wins (LED will flash on a player with a higher score).
   • Press “PLAY” to restart this game.
8. One to One
   • Press “PLAY” to enter game 8.
   • Press “UP/Down” to select playing time, 30/45/60 seconds.
   • Press “PLAY” to begin the game.
   • Shot made in “HOME” frame, 2 points scored for “HOME”, all shots count 3 points in last 10 seconds.
   • Shot made in “VISITOR” frame, 2 points scored for “VISITOR”, all shots count 3 points in last 10 seconds.
   • The player with more points scored wins when the time is out.
   • Press “PLAY” to restart this game.

Questions? Issues?
We are here to help!Phone: (1) 718-535-1800 Email: support@pyleusa.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>