KHLJJU 4324 Nightstand with Fabric Drawer Table Instruction Manual
- June 14, 2024
- KHLJJU
Table of Contents
Nightstand Assembly Instructions
Parts List
For assistance in assembling or questions on parts, please email us at Lttd33668@outlook.com
|
---|---
1.Note: The number of pre-drilled holes in the G side frame and the R side
frame is different, please assemble according to the direction of the manual
2.Please connect the (G) side frame and (R) side frame to the power board (A)
respectively| Insert the iron legs (H) into the G side frame and R side frame
|
Install the adjusting foot (J) to the iron leg H, then tighten it with the
screw (Q)| Connect the drawer slide (I) to the plate (D) and assemble the two
sets of parts in the same way
|
Put the assembled step ④ on the side frame of step ③, and then tighten it with
the screw (L).| Put the short board (E) on the pre-drilled hole in the (B)
board and tighten it with screws L from the bottom of the board B
|
Push the assembled step ⑥ into the side frame according to the instructions,
and tighten it with screws L| Assemble the board (C) according to the
orientation of the pre-drilled holes shown by the magnifying glass and tighten
with screws L
|
Align the back plate (F) with the pre-drilled holes on the B/C plate and
tighten with screws (N)| Open the cloth drawer U1, then put the wooden board
U2 inside
|
Connect the drawer handle U3 with screws U4| Put the two cloth drawers inside
the bedside table, check all the parts and tighten the screws to complete the
assembly
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>