EFHDP24GS1 EcoFlow 4G Dongle PPS User Manual
- June 14, 2024
- ECOFLOW
Table of Contents
EFHDP24GS1 EcoFlow 4G Dongle PPS
Introduction
- 4G Dongle (“the Dongle” for short ) is a smart communication expansion module that works with EcoFlow DELTA Pro Ultra to implement wireless communication between the inverter and EcoFlow Web portal through the 4G network.
Communication
What’s In The Box
Product Installation
Install a nano SIM card
- A: Install the provided nano data prepaid SIM card, the traffic of which is : Local Data Package (monthly) €1.9/1GB, prepaid through App. The included SIM card can only be used for this 4G dongle, not for other 4G modules or third party devices.
- B: You can also install a nano SIM card (size: 12 mm x 9 mm; capacity: ≥ 64 KB) that is prepared by yourself based on the traffic requirements: monthly traffic: ≥1GB
- Install the dongle onto the 4G dongle port of the inverter.
Activate your SIM card through App
- Refer to the information on your SIM card and setup APN, then tap “Save” to activate your SIM card.
LED Indicator
- Ensure that the inverter has been powered on.
- Observe the LED indicator to check the operating status.
| LED indicator status | Description |
|---|---|
| Blinking white slowly | Dialing / There is no communication |
Blinking white rapidly
| The inverter is communicating with EcoFlow Web through the Dongle.
Specifications
- To ensure stable data transmission, EcoFlow suggests 4G dongle to be installed in areas with stable mobile signal (2G signal ≥4 bars, 3G/4G signal ≥3 bars).
- For recommended carriers list and details on supported frequencies, please contact local distributors.
Basic Parameter
| Model| EF HD-P2-4G-S1
---|---|---
Installation| Plug-and-play
Dimensions| 87.5 mm x 44.0 mm x 16.3 mm
Weight| Approximately 36.3 g
IP rating| IP54 (After installed in the 4G dongle port of the inverter)
Connection interface| USB2.0 Type-A
Input| 5V
Wireless Parameter
| SIM Card Type| Nano SIM card (12 mm x 9 mm)
Supported Standards and Frequencies
| FDD-LTE Band 2: Tx: 1850-1910MHz, Rx: 1930-1990MHz FDD-LTE Band 4: Tx: 1710-1755MHz, Rx: 2110-2155MHz FDD-LTE Band 5: Tx: 824-849MHz, Rx: 869-894MHz
FDD-LTE Band 12: Tx: 699-716MHz, Rx: 729-746MHz
FDD-LTE Band 13: Tx: 777-787MHz, Rx: 746-756MHz
FDD-LTE Band 25: Tx: 1850-1915MHz, Rx: 1930-1995MHz
FDD-LTE Band 26: Tx: 814-849MHz, Rx: 859-894MHz
Max.RF Output Power
| FDD-LTE Band 2: 24.36dBm FDD-LTE Band 4: 23.81dBm FDD-LTE Band 5: 23.98dBm FDD-LTE Band 12: 23.71dBm FDD-LTE Band 13: 23.45dBm FDD-LTE Band 25: 23.99dBm
FDD-LTE Band 26: 24.06dBm
Environmental Temperature| Operating Temperature| –20°C to 45°C
Storage Temperature| –20°C to 45°C
Max. operating altitude| 3,000 m
Inverter Compatibility| Inverter model| EFYJ751-PCS-US
RF exposure statement
This equipment complies with the FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and any part of
your body.
This equipment meets the exemption from the routine evaluation limits in
section 2.5 of RSS-102. It should be installed and operated with a minimum
distance of 20cm between the radiator and any part of your body.
Safety Instructions
- Do not remove the SIM card when the card is in use. Otherwise, the card as well as your 4G Dongle may getdamaged and the data stored on the card may be corrupted.
- Do not use any SIM card that is not standard or isincompatible with the 4G Dongle. Otherwise, the card aswell as your 4G Dongle may get damaged and the data stored on the card may be corrupted.
- When using the 4G Dongle, ethernet and Wi-Fi to access a network simultaneously, their priorities are ethernet > Wi-Fi > 4G Dongle in order.
- Do not use this product in environments with high temperature, high humidity, strong magnetic field, or strong static electricity.
- Do not disassemble this product in any way or pierce it with sharp objects.
- Do not use unofficial components or accessories. If components or accessories need to be replaced, purchase them from the EcoFlow official sales channels.
FCC STATEMENT
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC
This device contains licence-exempt transmitter(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.