Urban Vitamin Palm Springs Earbuds User Manual

: June 14, 2024
: URBAN VITAMIN

Urban Vitamin Palm Springs Earbuds User Manual

PALM SPRINGS

DEVICE LAYOUT

1. Charging case
2. Type-C input
3. Battery/Charging indicator
4. Earbuds touch function
5. Ear hook

HOW TO CHARGE THE EARBUDS/CHARGING CASE

Put the earbuds in the charging case.
The lights in the charging case will turn on and starts charging the earbuds.

It takes around 2 hour to fully charge the earbuds. To charge the charging case, connect the case with the Type-C cable to a power source. It takes around 2 hours to fully charge the charging case.

DANGER!

To avoid hearing damage, limit the time you use earbuds at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is.

PAIRING FOR DOUBLE EARBUDS CONNECTION

The earbuds will turn on automatically when users open the charging case, and will turn off when users close charging case. (Not need to press any button to turn on/off earbuds unless there is no charging case). The earbuds will pair with each other automatically when they are on and enter into pairing mode automatically. No need to press any buttons. Turn on Bluetooth on your device and select “Urban Vitamin Pacifica’’ to connect the earbuds to your device.

FUNCTIONS

You can operate the earbuds with the touch function on the earbuds. Please check below instructions.

Play/pause music: Double touch left/right earbud
Pick up phone call: Double touch left/right earbud
End phone call: Double touch left/right earbud
Reject phone call: Touch and hold left/right earbud
Next song: Triple touch the right earbud
Previous song: Triple touch the left earbud

SPECIFICATIONS

Speaker driver (mm)	6mm*2
S/N Ratio (dB)	90 dB
Frequency range (Hz-KHz)	20Hz-20KHz
Continuous playing time	7.5 hours
Charging time earbuds	2 hour
Battery capacity Earbuds	50 mAh
Battery capacity Charging station	600 mAh
Mic function	Yes
Pick up function	Yes
BT version	5.3
Waterproof	IPX5

NOTICE!

Keep the product dry; do not place the product in damp places.
Keep out of direct sunlight and high temperatures. High temperatures may result in damage.
Keep out of cold temperatures. This will help avoid internal damage.
Keep the product out of reach of small children.
Do not vigorously shake, hit, drop or throw the product.
Risk of Fire and Burns; don’t open, crush, disassemble and dispose in fire.
Do not damage or modify the product. Damaging or modifying the item may exhibi unpredictable behavior resulting in fire, explosion or risk of injury.
Do not continue to charge the product over 10 hours.
When charging, use the Type-C charging cable that came with the product.

FAQ

How to reset the earbuds?

Put both earbuds back into the case. On the back of the case, you can find a button near the charging port. Press this button for 6 seconds. The earbuds will turn off and on again. When they turn on, the reset is done. All pairing records are deleted.

What to do if you cannot find the earbuds in the BT devices list?

On your mobile device, turn off Bluetooth and turn it back on. Then try pairing again. Delete the earbuds from the Bluetooth list on your mobile device. Then try pairing again. Move your mobile device closer to the earbuds and away from any interference or obstructions. Please make sure the earbuds are not connected to another device. If this isn’t the case, do a factory reset.

Can I connect the earbuds to my computer or laptop?

Yes, but you can only connect if the computer and laptop have the Bluetooth function.
Remark: When connecting the headphone with computer or laptop, the MIC function is not always available on all computers and laptops. This is due to the system design /setting /compatibility of your specific computer and laptop, but not an indication of any problems with the earbuds.

What to do when only 1 earbud connects?

If only one earbud is working, put them both back into the case and try again. If this still doesn’t work, please do a factory reset.
What if the music keeps playing when I put the earbuds back in the charging case?
You can put the earbuds back into the case without turning the music off. The music will stop playing when you close the lid.

Can I take off the ear hooks?

No, it is not possible to take the ear hooks off.

What does the IPX version of my earbuds stand for?

IPX5 stands for splash proof.

Why does the earbuds sound suddenly gets distorted?

Bluetooth signal is vulnerable to electromagnetic interference in airport, railway subway etc.

EU Declaration of Conformity

HXD Connects B.V. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Derective 2014/53/EU.The complete Declaration of Conformity can be found at www.xdconnects.com > search on item number