Keyless N1TY Tuya Smart Lock User Manual

USER MANUAL
N1TY Tuya Smart Lock

N1TY Tuya Smart Lock

Note：

1. This lock is equipped with mechanical keys for manual unlocking. Remove mechanical keys from the package and keep them in a safe place and always have access to them.
2. To power on the lock, 4 x AAA Alkaline batteries (not included) are required.
3. This lock is used outdoors and indoors. The waterproof rating: IP45
4. Keep your fingers clean when using this lock.
   Please read this manual before operating the smart lock, and keep it for further reference.

Product Profile

App Control Door Lock via Bluetooth
This smart lock uses the latest technology to make your life easier. It can be operated via bluetooth using the mobile App, it’s suited for Homes, Apartments, Offices Airbnbs, Motels, Holiday Homes, etc.
Specifications

All specifications are subject to change without notice. All rights reserved.

Featureds

• Four Ways to Access the Lock: App Access, Fingerprint, Password & Mechanical Key.
• Rugged: Zinc alloy body and strong handle design prevents forcible entry.
• Idling Lock Handle Design: When the door is locked, the clutch is in idle position, the front handle will be turned. However, the door will remain locked.
• Battery Dead Alarm: If the batteries are running low, the door lock will informs you through sound prompts. You can also check battery level on the mobile App.
• Emergency Power Supply: Emergency power supply interface equipped on the side of the front handle: to unlock the lock temporarily by connecting to the emergency power supply interface with a backup battery connect by USB cable.
• Real Time Record: You can check unlock records in real time on your App.

Packing List

Installation diagram

A) Outdoor lock body 1
B) Indoor lock body 1
C) Mounting plate 1
D) Single latch 1
E) Cylindrical sleeve bolt 2
F) M4 x 30mm cross flat head bolt 2
G) M4 x 25mm cross flat head self-tapping screw 4
H) M4 x 8mm cross flat head bolt 2
J) Mechanical key 2
K) Strike plate 1
L) Latch holding plastic box * 1

Door Preparation

1. Check door thickness and Door Frame.
   Door frame≧110mm
   Door thickness: 38~50mm

2. Check door open direction.

Note: Please refer the above picture to adjust the direction of strike plate (K) and latch (E).
Installation Templatei

Installation Instructions

Step 1 According to the map drilling holes on the door

Note:

1. Check the required backset (60mm or 70mm).
2. Align the template along the vertical center line of the single latch (E) at the desired height,and tape it to the door.
3. Mark the holes first, then start drilling.

Step 2 Install the single latch (D) with screws (G)

Note:
The single latch has TWO backset options: 60mm or 70mm, please adjust it by yourself.
Step 3 Fixed bolts (E) on outdoor unit (A)

Step 4 Install outdoor unit (A)
Note: Make sure the side with the text “This Side Up” on the square spindle must be upward.

Step 5 Install mounting plate (C) on the door

Step 6 Install indoor unit (B) on the door

Pair the Lock with Tuya App

Under initialization mode, the lock can be unlocked by any fingerprint or the initial code 123456.
Please pair your lock with Tuya App by following below steps before using the lock.

1. Tuya App Installation and Account Registration
   1.1. Download the “Tuya Smart” App from Google play store or Apple store.
   2.2. Install and register an account with your phone number or email.
   Note:
   The App supports Android 4.3 / IOS7.0 version and above. https://smartapp.tuya.com/tuyasmart

2. Pair the lock with Tuya App
   Scan the QR code to download the App
   2.1. Turn on the Bluetooth on your phone.
   2.2. Open Tuya Smart App on your phone, touch and activate the keyboard of lock.
   App will automatically search and display device that can be added. When you see the device (named “N1”), click “Add”, click icon and click “Done”, the lock will be added successfully. You can rename the lock.

You can also add the lock manually: Open App – click “Add device” – “Security & Video Surveillance” under “Electrical” bar – click the icon “Lock(BLE)” – “Next” and activate the keyboard of lock– click icon and click “Done” – the lock added successfully.
Note:

1. After successfully pairing, Tuya App on your phone becomes Administrator of the lock.
2. If you do not find the lock on App when pairing, please reset the lock first: Remove the battery cover on indoor lock body, keep pressing the reset button for about 6 seconds, keyboard lights up and system prompts long “Beep” once. Then you can pair the lock by following the steps above.
3. Once you pair the lock with your App account, the lock will not be able to link to other accounts, unless you remove the lock from your App.

Lock’s Operation on App

After pairing the lock with App, you can find the lock on the home page of App. Click the lock N1 to enter operation page of lock.You can press the icon or input Dynamic Password on the lock to unlock.

Note: When you unlock the lock with password, please press # after entering the password.

1. Member Management
   (You can skip this setting first and directly set up fingerprint / password on App.)
   There are Family Member and Other Member in Member Management. You (Administrator) can add users as family members or other members. When adding user as family member, the user needs a Tuya account. For other member, the user does not need a Tuya account. – Administrators can set passwords for themselves or Family / Other users.
   – Family members can set passwords for their use.
   – Other members can set passwords only when they are granted the permission to set.
   1.1. Family Member
   – Validity: Once added, the permission of the family member is permanent until the administrator removes the member. Family member will be able to control and use all devices in the family.
   – Unlock method: The administrator can set permissions of unlock method for family member via Bluetooth near the lock; If the administrator closes all unlock permissions, family member can no longer add his own unlock method.
   1.2. Other Member
   – Validity: Administrator can set the valid period of permission for other members. Valid period can be set to be permanent or timed.
   – Unlock method: The administrator can set permissions of unlock method for Other member via Bluetooth near the lock; If the administrator closes all unlock permissions, family member can no longer add any unlock method.

2. Settings
   You can set fingerprint / password / temporary password for unlocking on App.
   2.1. Fingerprint
   You can set your own fingerprint, or set fingerprint for member users by following steps:
   Fingerprint Management – Add Fingerprint – Select User – Start Capturing – Place your finger on
   recognition area of lock (need to repeat several times) –Name it & click Done 2.2. Password
   The password length should be 6~10 digits. You can set your own password, or set password for member users by following steps: Password Management – Add Password
   – Select the User – Create Customized or Random Password – Save 2.3. Temporary Password
   – Online Password (near the lock when setting)
   Bluetooth should be turn on when you set the online password. The password can be customized or random password.
   One-Time Password: The password can be used only once before it expires.
   Periodic Password: The password can be used multiple times before it expires.
   – Offline Password (need not near the lock when setting)
   Bluetooth does not need to be turned on when you set the offline password. The password will be created randomly.
   One-Time Password: The password is valid for 6 hours from generation and can be used only once before it expires.
   Time-Limited Password: The password should be use at least once within 24 hours after it takes effect. Otherwise, the password will becomes invalid. Clearing Code: It can only clear time-limited offline passwords used at least once.

3. Unlocking Records
   To view unlocking records.

4. Smart Linkage
   4.1. Family Go Home: Trigger linkage when family members go home.
   4.2. Door Lock Alarm: When door lock alarms, trigger linkage.

Passage Mode

-The lock is auto-lock for default. It means that the lock will lock automatically 5 seconds after unlocking.
-Passage mode, the lock will not lock automatically after unlocking until you press # to lock or turn off passage mode.

1. Turn on the Passage Mode
   There are two methods to turn on the passage mode.
   Method 1: Set on App Note:Your phone should be nearby the lock when setting passage mode via App.
   Method 2: Set on the lockStep| Operation| System Prompt
   ---|---|---
   1)| Press “28#” on the lock| Keyboard lights up
   2)| To unlock the lock via any one of ways below:
   1.Fingerprint (any one of first three fingerprints you set)
   2.Password (any one of first three passwords you set)|
   After the above two steps, passage mode is on.
2. Turn off the Passage Mode
   When passage mode is on, you can turn off the passage mode via any one of methods below:
   1). Press # key on the lock
   2). Fingerprint (place any one of fingerprints you set on the lock)
   3). Password (enter any one of passwords you set and press # on the lock)
   4). Long press the icon for 2 seconds on App (keep your phone next to the lock)

Restore Factory Settings

There are two methods to reset the lock.
Method 1: Reset on the lock

1. Remove the battery cover on inside body
2. Keep pressing the reset button for 6 seconds
3. keyboard lights up and the system prompts long “Beep” once
4. Reset successfully

Method 2: Remove the lock from App to reset

1. Find the lock on home page of App.
2. Long press the lock’s name for 1 second.
3. Click “Remove Device” at the bottom of the interface.
4. Click “Confirm” in the pop-up window. Reset successfully.

Home Setting

Click upper right corner of Home Page – Home Management, then enter Home Settings.
On the page of Home Settings, you can set “Home Name”, “Room Management”, “Location”, manage your “Home Member”, transfer the “Home Ownership”.

Other Functions of Tuya Smart

1. Smart

2. Scene
   Automation: Save your time and effort by automating routine tasks.
   Tap-to-Run: Create a task and tap it to run. This enables easy control of your smart devices. For example: One tap to run selected devices when family member go home.

3. Third-Party Voice Service: Alexa, Google Assistant, etc.（need Gateway and use Wifi 2.4 GHz.）More functions of Tuya Smart are waiting for you to discover.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>