Urban Vitamin Palo Alto Headphone User Manual

: June 14, 2024
: URBAN VITAMIN

Urban Vitamin Palo Alto Headphone User Manual

PALO ALTO HEADPHONE

DEVICE LAYOUT

1- Volume+/Next song
2- VoLme-/Previous song
3- BASS on/off
4- On/off , Play/pause button
5- Battery/Charging indicator
6- AUX port
7- Typ-C charging port
8- MIC

CHARGING

1. Connect the charger to the charging port

2. While charging the LED indicator will be sold be When fully charged the LED indicator will turn off automatically.

PAIRING

1. Tum on the headphones by pressing and hokling clown the phone button on the headphones for three seconds
2. The device’s LED indicator wil illuminate The LED indicator light MI blink between red and blue when it is in pairing node
3. On the mobile device (smortphoneitablen tun on the ET connection.
4. Select thban Vrtamin Palo Alto” in the available Wireless deices on your mobile device

FUNCTIONS

You can operate the headphone with the buttons on the headphone.
Please check below instructions.

Play/pause music: Press 4
Pick up phone call: Short press 4
Reject phone call: Long (2 s) press 4
End phone call: Short press 4
Next song: Long press 1
Previous song: Long press 2
Volume +: Short press 1
Volume -: Short press 2
BASS on/off: Press 3
Siri/Google Assistant: 2s press 3

SPECIFICATIONS:

Speaker driver (mm)	40mm
S/N Ratio (dB)	100dB
Frequency range (Hz-KHz)	20Hz-20KHz
Continuous playing time	60 hours
Charging time earbuds	3 hour
Battery capacity	500 mAh
Mic function	yes
Pick up function	yes
BT version	5.3+EDR
BT pairing name	Urban Vitamin Palo Alto

DANGER!

To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is.

NOTICE

Keep the product dry; do not place the product in damp places.
Keep out of direct sunlight and high temperatures High temperatures may result in damage.
Keep out of cold temperatures, this will help avoid internal damage.
Do not disassemble the product.
Avoid dropping the product
Do not continue to charge the product over 10 hours.
When charging use the Type-C charging cable that came with the product

EU Declaration of Conformity

Xindao B.V. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Derective 2014/53/EU.The complete Declaration of Conformity can be found at www.xindao.com > search on item number.

FAQ

How can I reset my headphone?

Press and hold “+” and “-” buttons for about 5 seconds when the headphone is in pairing mode. After reset you can hear a voice prompt saying “Bye”.

What to do if I cannot find the headphone in BT devices list?

On your mobile device, turn off Bluetooth and turn it back on. Then try pairing again.
Delete the headphone from the Bluetooth list on your mobile device. Then try pairing again.
Move your mobile device closer to the headphone and away from any interference or obstructions. Then try pairing again.

Can I connect to my computer or laptop?

Yes, but only if your computer or laptop has Bluetooth function.
Remark: When connecting the headphone with computer or laptop, the MIC function is not always available on all computers and laptops. This is due to the system design /setting /compatibility of your specific computer and laptop, but not an indication of any problems with the headphone.

Can I wash my ear pads?

No. The ear pads are made with leather, and not detachable from the product.
Therefore, it’s not suitable to wash the surface by water. Never immerse the headphone in water. You can use a cloth to clean the ear pads.