Urban Vitamin Belmont Headphone User Manual
- June 14, 2024
- URBAN VITAMIN
Table of Contents
Urban Vitamin Belmont Headphone User Manual
BELMONT HEADPHONE
DEVICE LAYOUT
1- Volume+/Next song
2- Volume-/Previous song
3- BASS on/off
4- On/off , Play/pause button
5- Battery/Charging indicator
6- AUX port
7- Micro USB charging port
8- MIC
CHARGING
1. Connect the charger to the charging port.
2. While charging the LED indicator will be solid red. When fully charged the
LED indicator will turn off automatically.
PAIRING
1. Turn on the headphones by pressing and holding down the phone button on
the headphones for three seconds
2. The device’s LED indicator will illuminate. The LED indicator light will
blink between red and blue when it is in pairing mode.
3. On the mobile device (smartphone/tablet) turn on the BT connection.
4. Select “Urban Vitamin Belmont” in the available Wireless devices on your
mobile device.
FUNCTIONS
You can operate the headphone with the buttons on the headphone.
Please check below instructions.
- Play/pause music: Press 4
- Pick up phone call: Short press 4
- Reject phone call: Long (2 s) press 4
- End phone call: Short press 4
- Next song: Long press 1
- Previous song: Long press 2
- Volume +: Short press 1
- Volume -: Short press 2
- BASS on/off: Press 3
- Siri/Google Assistant: 2s press 3
SPECIFICATIONS:
| Speaker driver (mm) | 40mm |
|---|---|
| S/N Ratio (dB) | 100dB |
| Frequency range (Hz-KHz) | 20Hz-20KHz |
| Continuous playing time | 35 hours |
| Charging time earbuds | 3 hour |
| Battery capacity | 500 mAh |
| Mic function | yes |
| Pick up function | yes |
| BT version | 5.0+EDR |
| BT pairing name | Urban Vitamin Belmont |
NOTICE
1. Keep the product dry; do not place the product in damp places.
2. Keep out of direct sunlight and high temperatures High temperatures may
result in damage.
3. Keep out of cold temperatures, this will help avoid internal damage.
4. Do not disassemble the product.
5. Avoid dropping the product.
6. Do not continue to charge the product over 10 hours.
7. When charging use the Micro USB charging cable that came with the product.
EU Declaration of Conformity
Xindao B.V. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Derective 2014/53/EU.The complete Declaration of Conformity can be found at www.xindao.com > search on item number.
FAQ
How can I reset my headphone?
Press and hold “BASS” button for about 5 seconds when the headphone is in pairing mode
What to do if I cannot find the headphone in BT devices list?
- On your mobile device, turn off Bluetooth and turn it back on. Then try pairing again.
- Move your mobile device closer to the headphone and away from any interference or obstructions.
Can I connect to my computer or laptop?
Yes, but only if your computer or laptop has Bluetooth function.
Remark: When connect the headphone with computer or laptop, the MIC function
is not always available on all computers and laptops. This is due to the
system design /setting /compatibility of your specific computer and laptop,
but not an indication of any problem with the headphone.
Can I wash my earpads?
You can use the a cloth to clean. The earpads are made by leather, and not
detachable from product.
Therefore, it’s not suitable to wash the surface by water.
Never immerse the headphone in water.
Does the MIC also work when connected by AUX cable?
No, the MIC doesn’t work when connected by AUX cable.
All control buttons won’t work in AUX IN mode too.
DOWNLOAD
Urban Vitamin Belmont Headphone User Manual – [Download PDF]
Urban Vitamin Belmont Headphone Declaration of conformity -[Download PDF]