CPTEA Wireless Door Chimes User Manual
- June 14, 2024
- CPTEA
Table of Contents
- CHANGE THE RINGTONE/PAIRING
- CLEAR SETTINGS & ADJUST VOLUME
- RECEVIER DIAGRAM
- TRANSMITTER DIAGRAM
- FEATURES & SPECIFICATIONS
- Specifications
- TROUBLE SHOOTING
- Q1: Why the AC receiver does not work?
- After receiving the package, do I need to pair the transmitter and receiver
- Will it continue to chime as long as the door is open?
- When changing the battery, won't the adhesive wear down over time by
- Q5: What happens when I clear the settings?
- Q6: In case of there is no power, will the receiver can work with
- Q7: Can a receiver play different chimes based on which transmitter is
- Q8: Can multiple devices be used in the same house without interference? If
- Q9: Any warning the transmitter's battery is getting low?
- Q10: Is it waterproof, can it be used outside?
- CHIMES LIST
- WARRANTY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CPTEA Wireless Door Chimes User Manual
CHANGE THE RINGTONE/PAIRING
Step 1 Plug the receiver into a socket and choose your favorite melody.
Step 2 Press and hold down the (Volume) button on the receiver for 5s, until it makes a “Ding” sound and the receiver indicator flashes.
Step 3 let the gap between sensor part and magnet beyond 0.4 inch (1cm), the receiver makes a “Ding-Ding” sound and indicator flashes
Step 4 Repeat the above operation to test, the receiver rings, and the pairing is successful
CLEAR SETTINGS & ADJUST VOLUME
**Adjust the Volume
**
- Press the volume button on the receiver to increase the volume.
- 5 level volume from 0 dB to 120dB. If the maximum volume has been set, the next level will switch to the minimum volume, the Silent Mode.
**Clearing the Settings
** Press and hold down the Forward Button on the receiver for about 5s until it makes a “Ding” sound with LED light flashing, all the settings will be cleared
RECEVIER DIAGRAM
Warm tip:
- Plugged in the power, the receiver will ring, while the light will flash.
- Receiver is better than 2 Ft from the ground, too close to the ground will affect the signal strength.
TRANSMITTER DIAGRAM
**Wireless Door Chimes
** When the gap between the sensor part and the magnetic pole is greater than 0.4 inch (1cm), the sensor sends a signal to the receiver
FEATURES & SPECIFICATIONS
Product Features
- Learning Code
- 55 Ringtones
- Memory Function
- Transmitter Waterproof Grade IP55
- Level 5 Volume Adjustable, 0-120 dB
- Wireless Range 500 Ft
Specifications
Specifications are subject to change without notice
Sensor Battery: 23A(Incl.)
Power Supply: DC12V
Transmitting Power: 15dB
Receiver Working Voltage: AC 100-260V
Frequency: 433MHz
Working Temperature: -22°F to 158°F
Product Material: ABS
TROUBLE SHOOTING
Q1: Why the AC receiver does not work?
If the AC receiver does not work, the following are possible causes: 1 The battery in the transmitter may be run down, please replace the battery. 2 The battery may be inserted the wrong way round, polarity reversed. Please insert the battery correctly, but be aware the reverse polarity may damage the unit. 3 Ensure that the AC receiver is switched on at the mains. 4 Check that neither the transmitter nor the receiver are near to possible sources of electrical interference, such as a power adapter, or other wireless devices. 5 The range will be reduced by obstacles such as walls, although this will have been checked during setup. 6 Check that nothing, particularly a metal object, has been placed between the transmitter and the receiver. You may need to reposition the AC receiver.
After receiving the package, do I need to pair the transmitter and receiver
myself?
This product has been coded at the factory and can be used directly without re-coding. Only after adding or replacing the transmitter, the code matching operation will be performed.
Will it continue to chime as long as the door is open?
The duration of the bell ring is that depending on the length of the bell, the bell will only ring once at a time. If you want the ringtone to be shorter, you can choose the Ding-Dong tone. If you want a long ringtone, you can choose music that lasts longer.
When changing the battery, won't the adhesive wear down over time by
removing and putting back into place?
Depending on the direction of your installation, you only need to smooth the sensor up or down without removing the back cover with adhesive wear
Q5: What happens when I clear the settings?
All settings will be cleared, which means the ringer you have set and the product you have paired will be cleared. When you press the transmitter button again, only the first transmitter will be automatically paired with the receiver, the other transmitters will need to be paired again.
Q6: In case of there is no power, will the receiver can work with
batteries?
A6: No, the receiver does not run on batteries.
Q7: Can a receiver play different chimes based on which transmitter is
activated?
A7: Yes, you can. When pairing a receiver, you only need to choose different ringtones for different transmitters. The music corresponding to each transmitter is determined in the learning mode. Normally changing the music track does not change the music corresponding to that transmitter
Q8: Can multiple devices be used in the same house without interference? If
I buy an additional kit, will all the devices work together in unison or independently
A8: Multiple transmitters can be paired with the same receiver with different ringtones. Likewise, one transmitter button can be paired with different receivers. If you add or replace a transmitter from the same manufacturer, you only need to repeat the pairing operation.
Q9: Any warning the transmitter's battery is getting low?
A9: There is no warning as to when new batteries are needed. If you press it and the receiver doesn't ring, the transmitter's batteries need replacing. It uses a 23A 12V battery. The expected battery life is about seven months if the transmitter is used more than 20 times per day.
Q10: Is it waterproof, can it be used outside?
A10: Sensor's waterproof grade is IP55, but we recommend that this sensor should not be used outdoors, because there is a battery installed, sometimes it is slightly thrown into the water does not affect the work, but should not stay in the water for too long.
CHIMES LIST
- Dingdong Dingdong
- Telephone Ringtone
- Ding dingdong
- Dingdong*2
- Dingdong
- Westminster Chimes
- Dingdong Dingdong
- Vocal 135i
- Vocal i531
- Bird
- Dog
- The Cuckoo Waltzes
- Spanish Lady
- Haydn
- Dingdong Dingdong
- Richard Lederman
- NOCK
- Cuckoo
- Green sleeves
- Radetzky March
- Turkischer March
- Toreador Song
- Toreador Song
- Merry Christmas
- Nokia Tune
- Classic Sound Effects
- Ringtones
- Yesenia
- Wilson March
- Ruse Dance1
- The Golden Jubilee
- Victory March
- Vocal 1351
- Luciano Pavarotti
- Happy Birthday
- Four Whistling Swans
- Vocal i531
- The Little Mermaid
- Seine River
- Scarborough fair
- MacDill dance
- Romance De Amour
- For Alice
- Dingdong dingdong
- Anita lane
- Susanna
- Ballade Pour Adeline
- Red River Valley
- Love is Blue
- Paganini
- Jingle Bells
- Happy Sunday
- Memory
- Italian Polka
- Moscow Nights
WARRANTY
If there is any issue with the product, please feel free to contact us by email at support@cptea.net, and you may also reach out to us via Amazon Message. We’ll try our best to give you a satisfactory answer.
Customer Service Team: support@cptea.net Website: www.cptea.net
Scan the QR code to activate the warranty.
Email: support@cptea.net
Website: www.cptea.net
EC REP C &E Connection E-Commerce (DE) GmbH
Zoom Linn graben 20, 65933, Frankfurt am Main, Germany
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>