SHIJIA KM113 Wireless Keyboard Instruction Manual
- June 14, 2024
- SHIJIA
Table of Contents
Product Manual
Mechanical Keyboard
Model :KM113
Product pictures (subject to the actual product)
Product Description
Fully transparent fashion design, colorful RGB lights
Full key conflict-free, hot-swappable, customized,
multimedia, mechanical keyboard.
System Requirements
Windows XP/Vista/7/8/9/10/11
MAC OS X
USB-A Port
Installation Method
Insert the USB interface of the keyboard into a free USB port on the computer, and it will automatically connect when the computer is turned on.
Backlight Mode
19+1 Lighting effects:
FN+Ctrl_R cycles to switch light modes
FN+Spacebar Switch light color
Introduction to key combinations
Fn+F1= Back key
Fn+F2= Forward key
Fn+F3= Home page
Fn+F4= Email
Fn+F5= Multimedia Player
Fn+F6= Pause playback
Fn+F7= Stop
Fn+F7= Stop
Fn+F8= Previous song
Fn+F9= next song
Fn+F10= volumeFn+F11= volume+
Fn+F12= mute
Fn+4= 2.4G mode Note: Short press to switch modes, long
Fn+4= 2.4G mode Note: Short press to switch modes, long press for 3 seconds to
enter pairing mode
Fn+W in=W in Lock
Fn+← = frequency0-
Fn+→ = frequency+
Fn+↑ = brightness+
Fn+↓ = brightness
FN+Ctrl_R: Adjust backlight mode
FN+Ctrl_R: Adjust backlight mode
Fn+A switches W IN system
Fn+S switch MAC system
Fn+Esc Restore factory settings
Mode switch
-
2.4G pairing
When switching to 2.4G mode, the light of the 4￥ key flashes green slowly. After pressing the FN+4$ key combination for 3 seconds to enter the pairing mode, the green light of the 4$ key flashes quickly. Insert the receiver and exit the code pairing after successful pairing. 4 The $ key light returns to backlight mode. After 20 seconds when the paired device cannot be found, exit the code matching mode 4$ key The white light flashes slowly and enters the waiting mode. After 20 seconds when the paired device cannot be found, exit the code matching mode 4$ key
The white light flashes slowly and enters the waiting mode. When there is no code matching action, it will enter sleep mode after 7 seconds. -
Reconnect instructions
During the 2.4G reconnection process, the green light of the 4￥ key flashes slowly. After the connection, it returns to the backlight mode.
W ithin 2 minutes from releasing the button, the reconnection fails, the backlight goes out, and the keyboard goes to sleep.
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.