HYDROTECHNIK 8988 Ensure Rubber Washer Instruction Manual
- June 14, 2024
- HYDROTECHNIK
Table of Contents
OPERATION INSTRUCTIONS
8988 Ensure Rubber Washer
Ensure rubber washer is securely in place inside the hose end connection
(coupler) before attaching the hose to the faucet (spigot). (Extra rubber
washer is included)
Make sure the coupler and the shut off valve end are both securely tightened
to the hose.
Connect hose coupler to the water spigot.
Close valve at other end of hose.
Turn on the water and fill the hose to expand completely. Remember to reapen
valve before use.
Water pressure must be 60 PSI to get optimal performance and expansion.
IMPORTANT INFORMATION
- Do not leave hose under full pressure when not in use.
- In extreme heat, store hose indoors.
- Do not leave hose outside in freezing temperatures, store indoors in the winter.
NOTICE: Hose retracts when the water source is turned off. Stand clear of any attached accessories that may be pulled toward the spigot.
QUESTIONS?
CALL or EMAIL
lf you have any questions or difficulty using this product, we are here to
help!
Our customer service team is available Monday through Friday, 9 am to 5 pm EST
1-844-430-1311
info@HydroTechProducts.com