PAJ GPS 2.0 Car OBD Finder User Guide

: June 14, 2024
: PAJ GPS

Table of Contents

PAJ GPS 2.0 Car OBD Finder
Product Usage Instructions
Product Description
OVERVIEW
Safety Instructions
Safety
Declaration of conformity
Packaging disposal
Disposal of used batteries
Meaning of the battery symbols
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PAJ GPS 2.0 Car OBD Finder

Specifications

Dimensions: 52.4 mm x 46.4 mm x 22.7 mm
GPS accuracy: Up to 5 meters
Battery: 3.7 V 140 mAh Li-ion
Weight: 45 g
Network: GSM/GPRS/LTE
Bandwidth: LTE/4G LTE-FDD: B1/B2/B3/B5/B7/B8/B20 (max. 2 W), GPRS GSM 900 MHz. (max. 2 W), DCS 18000 MHz. (max.1 W)
GPS-Chip: AT6558D
GSM-/GPRS-Module
GPS Reception
OBD port
Storage temperature
Operating environment

Product Usage Instructions

1. Scope of Delivery

The package includes:

CAR OBD Finder 4G 2.0 device
M2M SIM card (already inserted in the device)

Connection to Vehicle

Before connecting the device to the vehicle battery, please take note of the following:

Make a note of the device ID for activation.

Activation

In order to use your CAR OBD Finder 4G 2.0, you need to activate it online. Follow these steps:

Visit the following link: www.start.finder-portal.com
Follow the instructions provided on the website.

Turning On

After successful activation, the CAR OBD Finder 4G 2.0 is ready to be switched on. The device is automatically powered on when connected to the power supply.

Initial Setup

When using the FINDER for the first time, it is recommended to move the device for a few minutes. Drive your vehicle a few kilometers to allow the device to establish a connection with the network.

Tracking the Device

Once your device has been successfully activated and started up, you can track it using your phone, tablet, or PC. You have two options:

Use the mobile app: Install our App and follow the instructions provided.
Use the desktop version: Visit www.finder-portal.com and follow the instructions provided.

FAQ

Q: Can I replace the SIM card in the CAR OBD Finder 4G 2.0?

A : No, the SIM card is already inserted into the device and cannot be replaced.

Q: Where can I find the latest version of the user manual?

A : The latest version of the user manual can be viewed at any time on our website: www.paj-gps.de/finder.
Thank you for purchasing our FINDER!
Before starting: Read the instructions carefully, before using the FINDER for the first time. Please keep this user manual in a safe place in case you may need it in the future.

NOTE!

We update our user manuals on a regular basis, in order to keep them up to date. The latest version can be viewed at any time at www.paj-gps.de/finder.

Scope of delivery

Your delivery will include:
PAJ CAR OBD Finder 4G 2.0
M2M SIM card*
the M2M SIM card is already inside your FINDER and is not replaceable

Product Description

Connection to vehicle

Please observe the following points before connecting the device to the vehicle battery:
The SIM card is already in the FINDER.
No other components of your vehicle should be damaged by the attachment.
The CAR OBD Finder 4G 2.0 will be connected to the OBD port of your car (see image).

NOTE!

To activate you need the device ID. Please make a note before installing your FINDER.

Activation

In order to use your CAR OBD Finder 4G 2.0, you will need to previously activate it online. Enter the following link and follow the instructions:
www.start.finder-portal.com .

Turning on

After a successful activation, you can switch on the CAR OBD Finder 4G 2.0. By connecting the FINDER to the power supply the device has already been switched on.

NOTE!

After connecting and starting the FINDER for the first time, it is recom-mended to move the device for a few minutes. Drive your vehicle a few kilometers so that the device can dial into the best possible network for the initial connection.

Use

As soon as your device has been successfully activated, started up, and has sent and logged data for the first time, you can place it wherever you choose and use your phone, tablet, or PC to start tracking it! You will be able to do this in our App or enter the following link to the desktop version: www.finder-portal.com .

OVERVIEW

Menu
Notifications
Devices menu
Device position
2D / 3D setting
Own location
Map adjustment
Alarms on the route
Route points
Heat map
Routes

Meaning LED lights

Safety Instructions

Signal words

The following signal words are used in these operating instructions:

NOTE!

This signal word is used to draw your attention to an issue or situation. It also serves as a recommendation for proper use. Possible damage to property or personal injury can be prevented if this is observed.

WARNING!

This classifies a hazard of medium risk level. Failure to observe the warning may result in serious injury or damage.

Proper use

Read these safety instructions for this GPS tracker carefully before using it for the first time in order to use it properly. The intended use of the GPS Tracker to locate an object or a living being is only that described in this manual. Please note that it is a criminal offence to monitor third parties using a GPS tracker without their consent. If you use it in any other way, it will be considered improper and may result in damage to property or even personal injury.
Please note that the GPS Tracker is not a child‘s toy. In other countries and regions there are different laws concerning digital positioning and tracking of people, animals and/or objects. Salind UG cannot be held responsible if such laws or regulations are violated. The user is held solely responsible for this.

NOTE!

The manufacturer and dealer accept no liability for damage caused by improper or incorrect use.

Safety

WARNING! RISK OF ELECTRIC SHOCK!
A faulty electrical installation or a mains voltage that is too high can lead to an electric shock. Before use, check the mains voltage of the socket with the information on the rating plate. If you notice any visible damage to your GPS Tracker, do not use it. Never place the GPS Tracker near flames or hot surfaces. We recommend that you use it in dry environments if possible. Keep it away from moisture and do not bend it. Do not open the housing of the GPS tracker. Leave the repair work to qualified specialists.
However, if you carry out repairs yourself, connect the GPS Tracker improperly or operate it incorrectly, liability and warranty claims are excluded.
Hazards for children and vulnerable people
WARNING! DANGER OF SUFFOCATION!
Please do not allow the GPS Tracker to be used unsupervised by people (including children) with reduced physical, sensory or mental capabilities. The exception is if they have been in-structed beforehand by the person responsible for their safety of how to use the appliance. Make sure that your child does not handle small parts (e.g. accessories, etc.). These can be swallowed and lead to suffocation.

NOTE!

Inform your child about the dangers and use of the GPS tracker.

Declaration of conformity

Hereby, PAJ UG (haftungsbeschränkt) declares that the tracker, CAR OBD Finder 4G 2.0, is in conformity with the Directive 2014/53/EU. The complete text of the EU Declaration of Conformity can be found at the following Internet address:
paj-gps.de/konformitaetserklaerung/

Packaging disposal

Dispose of the packaging according to type. Throw cardboard and paper into the corresponding container. Foil belongs in the recyclables collection.

Disposal of used batteries

The following note is addressed to those who use batteries or products with built-in batteries and who will not resell them in the form in which they were supplied to them (end users).

Free recall of used batteries.

Batteries must not be disposed of with waste. You are legally obliged to return used batteries so that proper disposal can be guaranteed. You can return used batteries to a local collection point or to your local retailer. As a distributor of batteries, we are also to take back used batteries, although our obligation to take back used is limited to the type that we carry or have carried as batteries in our range. Used batteries of the aforementioned type can therefore either be returned to us with sufficient postage or handed in directly to our dispatch warehouse at the following address free of charge:
PAJ UG (haftungsbeschränkt)
Hohe Straße 61
51570 Windeck
Deutschland
E-Mail:[email protected]

Meaning of the battery symbols

Batteries are marked with the symbol of a crossed-out dustbin (see illustration). This symbol indicates that batteries must not be disposed of in household waste. Batteries containing more than 0.0005% mercury by mass, more than 0.002% cadmium by mass or more than 0.004% lead by mass are also marked with the chemical name of the pollutant below the dustbin symbol. The abbreviation „Cd“ stands for cadmium, „Pb“ for lead, and „Hg“ for mercury.

Disposal of electrical devices

The Electrical and Electronic Equipment Act (ElektroG) contains a large number of requirements for the handling of electrical and electronic equipment. The most important ones are summarised here.

Separate collection of WEEE:
- Waste Electrical and Electronic Equipment that has become waste is referred to as WEEE. Owners of WEEE must dispose of it separately from unsorted local waste. In particular, WEEE does not belong in household waste, but in special collection and return systems.
Batteries and accumulators:
- As a rule, owners of WEEE must separate spent batteries and accumulators that are not enclosed in the WEEE before handing them over at a collection point. This does not apply if the WEEE is handed over to public waste management authorities and separated from other WEEE there for the purpose of preparation for reuse.
Options for returning old appliances (WEEE):
- Owners of WEEE from private households can hand it into public waste management authorities or at the collection points set up by manufacturers or distributors as defined by the ElektroG. An online directory of collection and collection points can be found here: https://www.ear-system.de/ear-verzeichnis/sammel-und-ruecknahmestellen.jsf
Data Protection:
- Old equipment often contains sensitive personal data. This applies in particular to information and telecommunications technology devices such as computers and smartphones. For your own sake, please note that each end-user is responsible for deleting the data on the old equipment to be disposed of.
Meaning of the „crossed-out dustbin“ symbol:
- The symbol of a crossed-out dustbin regularly displayed on electrical and electronic equipment indicates that the respective device must be separated from unsorted local waste at the end
  of its service life.
Manufacturer registration number
- As a manufacturer, within the meaning of the ElektroG, we are registered with the responsible foundation Elektro-Altgeräte Register (Benno-Strauß-Str. 1, 90763 Fürth) under the following registration number: DE33887550.