986SB0101-CDR Badger Basket Covered Convertible Cedar Sandbox Instruction Manual
- June 4, 2024
- BADGER BASKET
Table of Contents
986SB0101-CDR
986SB0101-CDR Badger Basket Covered Convertible Cedar Sandbox
The model number of your item is printed on the side of your carton.
Always use this number to identify your item.
Thank you for your purchase of this quality Outdoor Decor. With proper use and
care, your Outdoor decor will provide you with years of enjoyment. Please
follow the instructions on how to assemble and disassemble your item. If you
should have any problems with your item, or you have any questions, DO NOT
return it to the place of purchase. Please call our toll-free number:
1-877-397-5144 and a customer service
representative will assist you. Enjoy your Product!
Please read the instruction manual carefully before use and follow the
instructions step-by-step.
This product has components that are made of wood, a natural product than can
have variations in texture and color depending on temperature and humidity.
This means that the wood can expand during periods of high humidity and
contract or shrink in times of low humidity. The expansions and contractions
can cause minor scratches and cracks in the surface. After a period of time,
wood can change color, which is a natural process. This does not affect the
durability of the wood. Please enjoy the beauty and variability of this
natural product!
If you do not plan to assemble your item shortly after opening, please store
the remaining pieces away from sunlight and moisture.
TOOLS THAT MAY BE REQUIRED
PLAN AHEAD.
Watch the weather: Be sure the day you select for installation is dry and
calm. DO NOT attempt to assemble this item in windy weather because of the
risk of damage to panels or personal injury. Be careful of wet and muddy
ground.
Teamwork: Whenever possible, two or more people should assemble. One person
can position parts or panels while the other is able to handle the tools.
IT TAKES TWO PEOPLE ABOUT ONE TO THREE HOURS TO COMPLETE.
SITE SELECTION: The ground surface must be level. Installing on the sloping
ground can cause your item to lean or “rack’. Leaning puts additional stress
on all connections and joints and in time will cause those connections to
loosen and fail.
INSPECTION AND MAINTENANCE:
- To ensure the safety of this product please inspect it carefully at the beginning of each season and twice monthly while in use.
- Check all hardware to be sure it is tight. Caution: overtightened hardware crushes the fibers of the wood and can result in split boards.
- Always check product stability.
CAUTION:
- Please perform regular inspections and maintenance to ensure that the product is not prematurely ageing.
- Take all precautions necessary to safeguard the safety of children.
ENVIRONMENT PROTECTION: Please recycle materials properly when finished installing product
WARNING!
- For domestic use only. Not for use in a commercial setting.
- Please place the playground equipment on a flat surface at a distance of at least 6 feet from other things such as: fences, garage, playsets, building structures (garage, shed, house), overhanging branches, clotheslines, or electric cables.
- This playground equipment may not be placed on asphalt, concrete or other hard surfaces.
WARNING! May only be used under the supervision of an adult.
-
This product is to be assembled by an adult and checked before each use.
-
Minimum age: 36 months
-
this item is not suitable for children under 36 months of age. Risk of suffocation or choking caused by small parts that may be swallowed!
-
Never leave child unattended when using this product.
-
Incorrect installation can be dangerous. To prevent serious injury or death, securely install all of the components and only use them according to the assembly instructions.
-
Do not use the product if any components are damaged or missing. Before using the product, carefully inspect for any loose components and carefully tighten any parts that are loose.
-
Make sure that the product is always on a flat surface. Improper installation can result in serious injury due to tipping or falling.
CLEANING AND MAINTENANCE
Note: The service life of the product may be substantially reduced if it
is permanently exposed to the weather.
Hazard – Check the product regularly for damage and dispose of it if
necessary.
o Check all nuts and bolts for tightness and tighten when required
o Oil all metallic moving parts
o Check all coverings for bolts and sharp edges and replace when required
o Check metal parts for rust. Replace if needed
o Replace any defective or missing parts
– If the above checks are not carried out, the product could break, overturn
or otherwise become a hazard.
– Clean regularly and treat with conventional care products once or twice a
year.
Storage
– Always store in a dry, well-ventilated place. Keep the product away from
moisture.
Step 1
Connect 2x part 1 with 2x part 2 as shown.
Step 2
(1)Connect 4x part above the part finished in step 1.
(2) connect the remaining 2x part and as shown.
NOTE: The holes in the middle of part should be opposite.
Step 3
*A 3.035 24pcs**
Use 4x part 10 to secure each side, fix roughly in the middle, using a total
24x screw(A) here.
NOTE: The holes in part 2 should NOT be blocked, but saved for later
assembly.
Step 4
*C 3.016 36pcs**
Use 3x hinges to secure part 4 and 5 as shown, using 18x screw(C); Repeat for another one.
Step 5
*A 3.035 12pcs**
Secure 3x part 9 with 2x part 8, and fix them according to the pre-drilled
holes on part 8, using 12x screw(A).
Note: The middle part 9 is fixed horizontally as shown.
Step 6
E M6*45 4pcs
2pcs
4pcs
Secure part 7 using 2x bolt&nut(E) on each side; Then connect the part finished
in step 5 to part 7, using the accessories provided as pictured.
Step 7
*D 3.020 8pcs**
Place 2x part 14 close to part 7, secure them using total 4x screw(D) on each
side, and repeat for another side.
Step 8
*B 3.030 16pcs**
Align part 11 with the edge of the bottom, secure each part 11 using a 4x screw(B); Place part next to part 11 , and take note that the side with 4 middle holes in part should face inwards, then fix it using 4x screw(B)on each side.
Step 9
*C 3.016 24pcs**
Place the part finished in step 4 as pictured, and use 2x hinges to fix them
with part 6, using 12x screw(C) on each side.
Step 10
*D 3.020 20pcs**
Place canopy, then use 4x part 12 and 2x part 13 to secure it, using a total 20x screw(C) here. Then place a black ground sheet, and the sitting part can be opened as pictured.
Critter Sitters
1-Year Limited Warranty Program
For a period of one (1) year after purchase, Citter Sitters (“Manufacturer”)
will either repair or replace defective components in accordance with this
Limited Warranty. This warranty is between the Manufacturer and the original
purchaser and is valid only when accompanied by the original purchaser’s sales
receipt showing the original date of purchase and location of purchase.
Replacements under this warranty revert back to the date of original purchase
for future warranty.
The manufacturer or its authorized dealer can accept or reject warranty claims
based on its findings. This warranty applies to normal residential use only
and is not intended for commercial use. The manufacturer can make
substitutions as required of materials, components, and sub-components of
comparable value and utility. This warranty is limited to product repair or
replacement (to be determined solely by the Manufacturer). Warranty return is
limited to only the single affected component.
This warranty covers only manufacturing defects and does not cover normal wear
and tear, abuse or misuse, exposure to extreme heat or cold, abrasion, or
excessive weight. This product is intended to be used in standard
installations only. This warranty is invalid if the product is not used for
the intended purpose. The manufacturer disclaims liability for any aspect of
installation and any inconvenience caused by a defective part of a component.
Certain items are not covered by this warranty. These include, but are not limited to the following:
- Components subjected to abuse, including abuse intended to simulate failure.
- Damages caused by a retailer, shipper, or installation crew (such as scratches, dents, tears, chips, etc.).
- Any part which merely exhibits normal wear yet functions essentially as new, including chips, scratches, or stretching of materials and stitching.
- Tears, punctures, scratches, or any damage caused by improper installation or use.
- Damage to frames/welds resulting from the improper assembly is not covered. General frame rusting is not covered.
- Fading and/or discoloration of fabrics resulting from exposure to the elements, chemicals, oils, fluids, or any other cause are not covered.
To make a claim, call the toll-free number below. Please have available a copy of the original sales receipt along with a brief description of the problem. Please also provide your email address and daytime telephone or cell phone #. All items may be charged actual freight costs plus $15 for handling. Repairs or replacements will be made at the Manufacturer’s option. Sales and use taxes, plus shipping and handling charges are the responsibility of the consumer.
Contact Warranty Services at
1-888-840-4557 or
Luv@MyCritterSitters.com
Documents / Resources
|
BADGER BASKET 986SB0101-CDR Badger Basket Covered Convertible Cedar
Sandbox
[pdf] Instruction Manual
986SB0101-CDR, Badger Basket Covered Convertible Cedar Sandbox, 986SB0101-CDR
Badger Basket Covered Convertible Cedar Sandbox, Basket Covered Convertible
Cedar Sandbox, Covered Convertible Cedar Sandbox, Convertible Cedar Sandbox,
Cedar Sandbox
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>