Critter Sitters 986SB0103-NAT Children’s Wooden Sand Box Boat User Manual
- June 4, 2024
- Critter Sitters
Table of Contents
Sitters 986SB0103-NAT Children’s Wooden Sand Box Boat
User Manual
986SB0103-NAT Children’s Wooden Sand Box Boat
986SB0103-NAT
The model number of your item is printed on the side of your carton. Always
use this number to identify your item.
Thank you for your purchase of this quality Outdoor Decor. With proper use and
care, your Outdoor decor will provide you with years of enjoyment. Please
follow the instructions on how to assemble and disassemble your item. If you
should have any problems with your item, or you have any questions, DO NOT
return it to the place of purchase. Please call our toll-free number
1-877-397-5144 and a customer service
representative will assist you. Enjoy your Product!
Please read instruction manual carefully before use and follow the
instructions step-by-step.
This product has components that are made of wood, a natural product than can
have variations in texture and color depending on temperature and humidity.
This means that the wood can expand during periods of high humidity and
contract or shrink in times of low humidity. The expansions and contractions
can cause minor scratches and cracks in the surface. After a period of time,
wood can change color, which is a natural process. This does not affect the
durability of the wood. Please enjoy the beauty and variability of this
natural product!
If you do not plan to assemble your item shortly after opening, please store
the remaining pieces away from sunlight and moisture.
TOOLS THAT MAY BE REQUIRED
PLAN AHEAD
Watch the weather Be sure the day you select for installation is dry and
calm.
DO NOT attempt to assemble this item in wncweather because of risk of
damage to panels or personal injury. Be careful of wet and muddy ground.
Teamwork: Whenever possible, two or more people should assemble. One
person can position parts or panels while the other is able to handle the
tools.
IT TAKES TWO PEOPLE ABOUT ONE TO THREE HOURS TO COMPLETE.
SITE SELECTION: The ground surface must be level. Installing on sloping
ground can cause your item to lean or “rack”. Leaning puts additional stress
on all connections and joints and in time will cause those connections to
loosen and fail.
INSPECTION AND MAINTENANCE:
- To ensure the safety of this product, please inspect it carefully at the beginning of each season and twice monthly while in use.
- Check all hardware to be sure it is tight. Caution: overtightened hardware crushes the fibers of the wood and can result in split boards.
- Always check the product stability.
CAUTION:
- Please perform regular inspections and maintenance to ensure that the product is not prematurely ageing.
- Take all precautions necessary to safeguard the safety of children.
ENVIRONMENT PROTECTION:
Please recycle materials properly when finished installing product.
WARNING!
- For domestic use only. Not for use in a commercial setting.
- Please place the playground equipment on a flat surface at a distance of at least 6 feet from other things such as: fences, garage, playsets, building structures (garage, shed, house), overhanging branches, clotheslines or electric cables.
- This playground equipment may not be placed on asphalt, concrete or other hard surfaces.
WARNING! May only be used under the supervision of an adult.
– This product is to be assembled by an adult and checked before each use.
– Minimum age: 36 months – this item is not suitable for children under 36
months of age. Risk of suffocation or choking caused by small parts that may
be swallowed!
**** – Never leave child unattended when using this product.
– Incorrect installation can be dangerous. To prevent serious injury or death,
securely install all of the components and only use according to the assembly
instructions.
– Do not use the product if any components are damaged or missing. Before
using the product, carefully inspect for any loose components and carefully
tighten any parts that are loose.
– Make sure that the product is always on a flat surface. Improper
installation can result in serious injury due to tipping or falling.
CLEANING AND MAINTENANCE
Note: The service life of the product may be substantially reduced if it
is permanently exposed to the weather.
– Hazard – Check the product regularly for damage and dispose of it if
necessary.
o Check all nuts and bolts for tightness and tighten when required
o Oil all metallic moving parts
o Check all coverings for bolts and sharp edges and replace when required
o Replace any defective or missing parts
– If the above checks are not carried out, the product could break, overturn
or otherwise become a hazard.
– Clean regularly and treat with conventional care products once or twice a
year.
Storage
– Always store in a dry, well-ventilated place. Keep the product away from
moisture.
ASSEMBLY INSTRUCTIONS
-
Secure part 17 with part 1 using 3x screw(B) according to pre-drilled holes.
-
Connect part 1 , 2 and 3 , secure them according to the pre-drilled holes on part 3 , using 8x screw(B).
-
Insert part 4 into the corner of part 1 ,secure each side using 3x screw(C) .
NOTE: The pre-drilled holes of part 4 should face outwards. Then secure part 7 with part 4 using 4x bolt&nut (F). -
Insert part 5 into the corner of part 2 ,secure them using total 6x screw(C);Then secure another part 7 using 4x bolt&nut (F).
-
Place part close to part finished on step 1, and secure 2x part using 4x screw(D);
-
secure part with part using 4x bolt&nut (F).
-
put on 4x part .
Fix 4x part6 using total 16x screw(B).
-
secure part 11 with part 10 ,each side using 4x (1)
-
Insert part 9 into the corner of part 11 ,and secure them using 8x screw(C).
-
secure 2x part 13 with part 7 according to the pre-drilled holes on part 7 ,using 8x screw(D).
-
Secure part 14 with part 7 , each using 2x bolt& screw(C); nut(E). Then secure part 15 using 4x screw(C).
-
put on part 12
-
Secure part 12 using 4x screw(B).
-
Put canopy above part 15 ,and use 1x part 16 to fix one side of canopy, using 4x screw(A).
-
Use another part 16 to fix canopy on the other side, using 4x screw(A).
-
secure steering wheel as pictured, using the accessories provided.
Step 9 Place the black ground sheet.
Critter Sitters
1-Year Limited Warranty Program
For a period of one (1) year after purchase, Citter Sitters (“Manufacturer”)
will either repair or replace defective components in accordance with this
Limited Warranty. This warranty is between Manufacturer and the original
purchaser and is valid only when accompanied by the original purchaser’s sales
receipt showing original date of purchase and location of purchase.
Replacements under this warranty revert back to the date of original purchase
for future warranty.
Manufacturer or its authorized dealer can accept or reject warranty claims
based on its findings. This warranty applies in normal residential use only
and is not intended for commercial use. Manufacturer can make substitutions as
required of materials, components, and sub-components of comparable value and
utility. This warranty is limited to product repair or replacement (to be
determined solely by Manufacturer). Warranty return is limited to only the
single affected component.
This warranty covers only manufacturing defects and does not cover normal wear
and tear, abuse or misuse, exposure to extreme heat or cold, abrasion or
excessive weight. This product is intended to be used in standard
installations only. This warranty is invalid if the product is not used for
intended purpose. Manufacturer disclaims liability for any aspect of
installation and any inconvenience caused by a defective part of a component.
Certain items are not covered by this warranty. These include, but are not
limited to the following:
- Components subjected to abuse, including abuse intended to simulate failure.
- Damages caused by retailer, shipper or installation crew (such as scratches, dents, tears, chips, etc.).
- Any part which merely exhibits normal wear yet functions essentially as new, including chips, scratches or stretching of materials and stitching.
- Tears, punctures, scratches or any damage caused by improper installation or use.
- Damage to frames/welds resulting from improper assembly is not covered. General frame rusting is not covered.
- Fading and/or discoloration of fabrics resulting from exposure to the elements, chemicals, oils, fluids or any other cause are not covered.
To make a claim, call the toll-free number below. Please have available a copy
of the original sales receipt along with a brief description of the problem.
Please also provide your email address and daytime telephone or cell phone #.
All items may be charged actual freight costs plus $15 for handling. Repairs
or replacement will be made at the Manufacturer’s option. Sales and use taxes,
plus shipping and handling charges are the responsibility of the consumer.
THIS IS THE ENTIRE EXCLUSIVE EXPRESS LIMITED LIABILITY. THE MANUFACTURER
NEITHER MAKES NOR IS RESPONSIBLE FOR ANY OTHER WARRANTIES, EITHER EXPRESS OR
IMPLIED, INCLUDING THOSE OF RETAILING DEALERS. THIS EXCLUSIVE REMEDY IS
LIMITED TO RECEIPT OF A CREDIT IN CONNECTION WITH THE REPAIR OR REPLACEMENT OF
ANY PRODUCT OR COMPONENT DEEMED TO BE DEFECTIVE UNDER THE TERMS AND CONDITIONS
AS STATED IN THIS WARRANTY. NEITHER CAMBRIDGE PRODUCTS, THE PRODUCT
MANUFACTURER NOR ITS AGENTS SHALL BE LIABLE IN ANY CASE FOR INCIDENTAL,
INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY OR NEGLIGENCE EVEN IF IT
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. EXCEPT AS OTHERWISE MAY
BE REQUIRED BY LAW, THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES OTHER
THAN THE WARRANTY DESCRIBED HEREIN, AND ALL OTHER WARRANTIES, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE
EXPRESSLY DISCLAIMED.
Contact Warranty Services at
1-888-840-4557 or
Luv@MyCritterSitters.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>