AJA VIDEO SYSTEMS HA5-Plus Mini Converter User Guide
- June 14, 2024
- AJA VIDEO SYSTEMS
Table of Contents
- AJA VIDEO SYSTEMS HA5-Plus Mini Converter
- Product Information
- Notices
- Introduction
- Block Diagram
- User Controls
- Operation
- Installing Mini-Config
- Running Mini-Config
- Operating Mini-Config
- Input Tab Screen
- Output Tab Screen
- Audio Tab Screen
- Update Tab Screen
- Specifications
- Safety and Compliance
- Declaration of Conformity
- Warranty and Liability Information
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
AJA VIDEO SYSTEMS HA5-Plus Mini Converter
Product Information
Specifications
- Product Name: HA5-Plus Mini-Converter
- Conversion: HDMI to 3G-SDI
- Version: 1.9
- Published Date: February 7, 2023
Overview
The HA5-Plus Mini-Converter is designed to convert HDMI signals to 3G, HD, or SD SDI. It allows for up to eight channels of HDMI audio to be embedded into the SDI output, providing a convenient single cable audio/video connection. Additionally, it supports the use of two external analog audio inputs to replace two of the embedded audio channels if desired. The HA5-Plus is particularly useful for connecting HDMI cameras and other sources to SDI capture cards and equipment.
Features
The HA5-Plus Mini-Converter offers the following features:
- HDMI to 3G, HD, or SD SDI conversion
- Support for up to eight channels of HDMI audio embedding into SDI output
- Option to replace two embedded audio channels with external analog audio inputs
- Support for long HDMI cables on the input
Audio
The HA5-Plus Mini-Converter supports the embedding of up to eight channels of HDMI audio into the SDI output. Additionally, it offers two external analog audio inputs that can replace two of the embedded audio channels if desired.
I/O Connections
The HA5-Plus Mini-Converter features the following input and output connections:
- Input: HDMI
- Output: 3G-SDI, HD-SDI, SD-SDI
- Analog Audio Inputs: 2x RCA
User Controls
The HA5-Plus Mini-Converter includes the following user controls:
- Mini-Config Control: Allows for configuration and control of the Mini-Converter
Installation
To install the HA5-Plus Mini-Converter, follow these steps:
Step 1: Connect the HDMI Source
Connect the HDMI source device to the HDMI input of the Mini-Converter using an HDMI cable.
Step 2: Connect the SDI Output
Connect the 3G-SDI, HD-SDI, or SD-SDI output of the Mini-Converter to the SDI capture card or equipment using anV appropriate SDI cable.
Step 3: Optional – Connect External Analog Audio Inputs
If desired, connect external analog audio sources to the RCA analog audio inputs of the Mini-Converter.
Step 4: Power On the Mini-Converter
Connect the power adapter to the Mini-Converter and plug it into a power outlet. The Mini-Converter will power on automatically.
FAQ (Frequently Asked Questions)
-
Q: Can the HA5-Plus Mini-Converter pass HDMI video with HDCP copy protection?
A: No, the HA5-Plus Mini-Converter will not pass HDMI video with HDCP copy protection. -
Q: How can I contact AJA for sales or support?
A: You can contact AJA for sales or support using any of the following methods:
Telephone: +1.530.271.3190
FAX: +1.530.271.3140
Web Support: https://www.aja.com
Support Email: support@aja.com
Sales Email: sales@aja.com
Notices
Trademarks
- AJA® and Because it matters.® are registered trademarks of AJA Video Systems, Inc. for use with most AJA products. AJA™ is a trademark of AJA Video Systems, Inc. for use with recorder, router, software and camera products. Because it matters.™ is a trademark of AJA Video Systems, Inc. for use with camera products.
- Corvid Ultra®, lo®, Ki Pro®, KONA®, KUMO®, ROI® and T-Tap® are registered trademarks of AJA Video Systems, Inc.
- AJA Control Room™, KiStor™, Science of the Beautiful™, TruScale™, V2Analog™ and V2Digital™ are trademarks of AJA Video Systems, Inc.
- All other trademarks are the property of their respective owners.
Copyright
Copyright © 2023 AJA Video Systems, Inc. All rights reserved. All information
in this manual is subject to change without notice. No part of the document
may be reproduced or transmitted in any form, or by any means, electronic or
mechanical, including photocopying or recording, without the express written
permission of AJA Video Systems, Inc.
Contacting AJA Support
When calling for support, have all information at hand prior to calling. To
contact AJA for sales or support, use any of the following methods
Telephone | +1.530.271.3190 |
---|---|
FAX | +1.530.271.3140 |
Web | https://www.aja.com |
Support Email | support@aja.com |
Sales Email | sales@aja.com |
Introduction
Overview
The HA5-Plus converts HDMI to 3G, HD, or SD SDI. Up to eight channels of HDMI audio are embedded into the SDI output allowing a convenient single cable audio/video connection. Two external analog audio inputs can replace two of these embedded audio channels if desired. The HA5-Plus supports long HDMI cables on the input. The HA5-Plus is useful for connecting HDMI cameras and other sources to SDI capture cards and equipment.
Features
- HDMI to SDI (see “Appendix A Specifications” on page 17 for a complete list of supported inputs).
- Full 10-bit Conversion
- Full HDMI support including embedded audio
- Equalized HDMI input supports long HDMI cables up to 30m
- PLL clock filtering for low jitter SDI outputs
- Lock LED shows type of input source: SD (green), HD (red), or 3G (amber)
- Unbalanced analog audio input (2 RCA)
- Accepts 8 channels of HDMI embedded audio
- Outputs 8 channels of SDI embedded audio (Channels 1-8 or 9-16)
- HDMI cable supplied
- Uses universal input +5V power supply AJA model DWP-U-R1 (included)
NOTE : The HA5-Plus will not pass HDMI video with HDCP copy protection
Block Diagram
Audio
The HA5-Plus converter supports 8 audio channels (4 stereo pairs) at 24-bit/48
kHz which it dis-embeds from HDMI and embeds into SDI. For proper embedding,
audio must be synchronous to video. If audio is not synchronous with video or
the sample rate is not 48 kHz, then Mini-Config must be used to set the Sample
Rate Converter to convert audio to 24-bit/48 kHz and then synchronize it with
input video before embedding.
I/O Connections
NOTE : The Lock LED indicates valid input video by color. Green is SD video, red is HD video, amber is 3G video, off is no input.
User Controls
Mini-Config Control
Auto controls configures the unit automatically to match the input and output
video parameters. Advanced Mini-Config control supports setting the RGB video
range, and adjusting audio input, conversion, and routing to embedded HDMI
audio.
Configuration set via Mini-Config is stored in the HA5-Plus unit through
subsequent power cycles.
Installation
Typically, HA5-Plus installation consists of the following steps:
- Ensure the converter is disconnected from power.
- Connect equipment to the converter HDMI input connector, the output BNC connector, and the analog audio inputs (if used).
- Connect audio equipment to RCA connectors (optional)
- Apply power to the converter (AJA power supply included).
- The converter will now run using the default factory settings. If you wish to alter the factory settings, you’ll need to:
- Install the AJA Mini-Config software on your computer
- Attach the converter via USB
- Make your changes using Mini-Config setup screens.
- This process is detailed in “Chapter 2 Operation” on page 7.
Operation
USB Control and Setup—Using AJA Mini-Config Your AJA Mini-Converter can be used right out of the box for some applications since it is designed to recognize inputs and perform standard actions automatically by default. However, to use its full capability, you must use AJA’s Mini-Config software application for PCs and Macs. This same application can be used to update to new Mini-Converter software released by AJA.
Acquiring Mini-Config
AJA’s Mini-Config application is available for download from the AJA website.
To download the latest Mini-Config package, which includes the Mini-Config
application, Mini-Converter firmware, and documentation, go to:
https://www.aja.com/en/products/mini-converters/mini-config-software Select
either the Windows or Mac icon to download the desired version.
Mini-Converter Documentation
- Included with the Mini-Config package is a complete set of documentation for all Mini-Converters supported by Mini-Config. A .PDF of the Installation and Operation Guide for the currently connected Mini-Converter can be accessed from the Mini-Config UI via the Help/Manual drop-down menu. Documentation for all AJA Mini-Converters that use Mini-Config can also be accessed directly in the Mini-Config download package Documentation folder, and via the Documentation icon available on the Mac installer. Documentation (and firmware) included with the Mini-Config application are the versions available at the time of distribution. However, Mini-Converter software, firmware and documentation are updated regularly, so newer versions may exist.
- To download the latest documentation for an individual Mini-Converter, go to: https://www.aja.com/en/category/mini-converters and navigate to the Support web page of that Mini-Converter.
Installing Mini-Config
PC Installation
To install Mini-Config on a Windows PC:
- Download the application from the AJA website (select the Windows icon on the Mini-Config Support web page).
- Open the AJA_MiniConfig.zip file
- Double-click on the MiniInstaller.msi file.
- A Setup Wizard will guide you through the installation.
- Click Next to begin. Answer the questions in the subsequent dialogues. When finished, an AJA Mini-Config shortcut will be installed on the desktop, and you will be able to locate the Mini-Config application in the AJA folder in the Programs listing.
NOTE : If the Mini-Config application already exists on the PC, a different Setup Wizard appears.
With this screen you can Repair (reinstall) or Remove (uninstall) Mini-Config on the PC.
Mac Installation
To install the application on a Mac:
NOTE : Mac computers must be Intel-based (G5, G4 and earlier models will
not work with Mini-Config).
-
Download the application from the AJA website (select the Apple icon on the Mini-Config Support web page).
-
Open the AJA_MiniConfig folder.
-
Double-click on the AJAMiniConfig.dmg file
-
Answer the prompt and a utility program will be launched.
Figure 5. Mini-Config Mac Installer -
To complete the installation drag the MiniConfig.app icon to the Applications folder.
Running Mini-Config
Connect the Mini-Converter to the PC or Mac via the supplied USB cable. Connect the external power supply (supplied) to the Mini-Converter.
PC Startup
To run Mini-Config on a PC, double-click on the AJA Mini-Config icon on your
desktop, or open the AJA folder in the program list and click on the AJA Mini-
Config application located inside the Mini-Config folder
Mac Startup
To run Mini-Config on a Mac, open the Applications folder and locate the AJA
Mini-Config application. Double-click the application to launch it.
Saving Setups
A File drop down menu on the Mini-Config application bar allows you to save
the current state of the Mini-Converter to a preset file for later recall
- Using this feature you can set up the converter for different applications, storing each configuration (Save Preset As…) with a unique name for easy recall (Open Preset…).
- A Revert to Factory Settings menu item similarly allows you to change the settings back to AJA’s factory defaults
Operating Mini-Config
The Mini-Config application provides a graphic interface for viewing settings
and updating software. It consists of an information area at the top that
shows the available Mini-Converters attached to the computer via USB, with a
graphical rendering of the selected Mini-Converter showing all the connectors
and their current state.
Colored text next to the connectors indicates the signal type and what the
Mini-
Converter is doing:
- Blue text indicates the values automatically selected
- Black text indicates values that you have manually selected
- Red text indicates the Mini-Converter is not detecting a signal, or cannot operate with the current user settings.
NOTE : Even if no output device is detected, the SDI connector text still
shows the signal it is outputting.
NOTE : Configuration settings in red will change based on the attached
output device as well as input signals. For improved accuracy and reliability,
you should configure the Mini-Converter only when the target output device is
attached and input signals are supplied at the inputs.
Screens are virtually the same on both PC and Mac, with subtle differences
that reflect the general look of the platform environment.
Selecting a Mini-Converter with the pulldown menu causes this application to connect to the selected converter. The graphic of Mini-Converter and text below it provides:
- Type of converter
- Firmware version
- Serial number of the unit.
A status field at the bottom of the screen shows if your application is
connected and communicating with the Mini-Converter.
When configuring the Mini-Converter, select it from the top pulldown, view the
current settings and change any values. Making a change communicates that new
value to the Mini-Converter’s non-volatile memory.
Tabbed Screens
- The Tabs delineate control screens with groups of controls for each type of task to be performed.
- The controls for the actual configuration parameters are specific to each Mini- Converter type. When you Click on any of the tab buttons, the pane below the tabs will change to match your tab selection. Any changes you make are immediately applied and will be saved, overwriting previous settings.
Input Tab Screen
Click on the Input tab to view and make changes to the HA5-Plus input settings.
RGB Range
Selects the Input Video Color Range. Choose from
- Auto
- SMPTE
- Full color range
Output Tab Screen
Click on the Output tab to view and make changes to the HA5-Plus output settings.
3G Mode
This control selects the type of 3G SDI output. Choose from 3G-Level A or 3G-
Level B.
NOTE: The 3G Mode parameter only has an effect if the output is 3G-SDI.
Enable PtoPsF
This control selects whether progressive video is converted to PsF output.
NOTE : The Enable PtoPsF parameter only has an effect if the input is
1080p 23.98, 24, 25, 29.97, or 30.
Audio Tab Screen
Click on the Audio tab to view and make changes to the HA5-Plus audio
settings.
NOTE : When using the DVI video protocol no audio is output, since that
protocol is video only.
Input Select
Choose what audio channels are routed to the SDI output.
- HDMI – Only the audio channels from the HDMI input are embedded.
- Analog – Only the two analog input channels are embedded. You can choose which of the embedded SDI channels will receive the analog audio, using the Analog Out Map and Channel Select settings. The other channels will be muted.
- Analog + HDMI – Both the analog inputs and HDMI audio are embedded. You can choose which of the HDMI channels will be replaced by the two analog audio inputs, using the Analog Out Map and Channel Select settings.
- None – No audio will be embedded. All channels are muted.
HDMI Conversion
Choose the audio conversion to be performed on the incoming HDMI audio.
- Convert Rate – The HDMI audio will be converted, if necessary, to 24-bit/48 kHz audio.
- Pass Through – The HDMI audio will be passed to the SDI-embedded audio channels without conversion.
Analog Out Map
Permits selecting the pair of SDI-embedded audio channels that will receive
the analog audio from the RCA connectors. The audio pair replaced depends on
the Channel Select setting below, and your choice of Ch 1-2 through Ch 7-8
that correspond to that set of embedded channels.
Channel Select
Choose which set of 8 channels (4 pairs) of embedded audio the SDI output will
carry. Select Channels 1-8 or Channels 9-16.
Update Tab Screen
Use this Update tab screen to view the software version currently installed on
the converter or install new software.
NOTE : When discussing Mini-Converters, “Firmware” is software that will
be stored in the Mini-Converter’s non-volatile memory and used when it is
powered up. This is something different than the Mini-Config application
software. The version numbers shown in the Update screen refer only to the
firmware.
Installed
This field shows the version of the firmware currently installed inside the
Mini- Converter.
Desired
This field shows the version of firmware embedded in the Mini-Config
application which you can install into the Mini-Converter by clicking the
Update button.
Update
This button initiates a software update operation loading the “Desired”
version of firmware into the Mini-Converter’s non-volatile memory.
Progress
This indicator bar shows the progress of firmware installation. See “Acquiring
Mini-Config” on page 7 and “Installing Mini-Config” on page 7 for more
information.
Info Tab Screen
This screen provides basic information about the Mini-Converter. This
information is mostly useful when calling AJA Support for service or technical
support.
Name
This field allows you to give your Mini-Converter a name. This can be useful
if you have several Mini-Converters attached to a Mac/PC via USB so you can
distinguish between them easily (especially if they’re the same model).
Type
This is the factory set model name of the Mini-Converter.
Assembly
This is the factory assembly number.
Serial Number
This is the factory set unique serial number of your Mini-Converter. If you
ever call AJA Support for service, you may be asked for this number.
Specifications
HA5-Plus Tech Specs
-
Video Formats
- (HD) 1920 x 1080p
- (HD) 1920 x 1080i
- (HD) 1280 x 720p
- (SD) 720 x 576p
- (SD) 720 x 576i
- (SD) 720 x 480p
- (SD) 720 x 480i
Note : HDCP content not supported
-
Video Input Digital
- 1x HDMI Type A connector, HDMI v1.4
- YCbCr 4:2:2/4:4:4/4:2:0
- 8 or 10-bit (HFR 4:2:2 limited to 10-bit)
- (HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- (HD) 1920 x 1080i 50, 59.94, 60
- (HD) 1280 x 720p 50, 59.94, 60
- (SD) 720 x 576p 50
- (SD) 720 x 576i 25
- (SD) 720 x 480p 59.94
- (SD) 720 x 480i 29.97
-
Video Output Digital
- 1x 3 Gb SDI (Level A or B-Dual Link)
- (HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- (HD) 1920 x 1080i 50, 59.94, 60
- (HD) 1280 x 720p 50, 59.94, 60
- 1x 1.5 Gb SDI
- (HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30
- (HD) 1920 x 1080i 50, 59.94, 60
- (HD) 1280 x 720p 50, 59.94, 60
- 1x 270 Mb SDI
- (SD) 625i 50
- (SD) 525i 59.94
-
Audio Input Digital
- HDMI embedded audio, 24-bit, 8-Channel
- 2-Channel RCA style analog audio (-10 dBu nominal)
-
Audio Output Digital
- SDI embedded audio, 24-bit, 8-Channel
-
Size (w x d x h)
- 4.6” × 2.4” × 1.0”(116.84 × 60.96 × 25.4 mm)
-
Power
- Uses AJA power supply model DWP-U-R1, included with purchase
- 100-240V, 50/60 Hz universal input
- +5V DC regulated, 7.5 watt capacity
-
Environment
- Safe Operating Temperature: 0 to 40 C (32 to 104 F)
- Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
- Operating Relative Humidity: 10-90% noncondensing
- Operating Altitude: <3,000 meters (<10,000 feet)
Safety and Compliance
Class A Interference Statement
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15, Subpart B of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Canadian ICES Statement
Canadian Department of Communications Radio Interference Regulations This
digital apparatus does not exceed the Class A limits for radio-noise emissions
from a digital apparatus as set out in the Radio Interference Regulations of
the Canadian Department of Communications. This Class A digital apparatus
complies with Canadian ICES-003.
Regulatory Compliance
This equipment may be operated in the countries that comprise the member
countries of the European Union and the European Free Trade Association. These
countries, listed in the following paragraph, are referred to as The European
Community throughout this document:
AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND,
FRANCE, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA, LITHUANIA,
LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA, SLOVAKIA, SLOVENIA,
SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LICHTENSTEIN, NORWAY, SWITZERLAND
Declaration of Conformity
Marking by this symbol indicates compliance with the Essential Requirements of the EMC Directive of the European Union 2014/30/EU. This equipment meets the following conformance standards:
Safety
EN 62368-1: 2014 + A11 (T-Mark License),
IEC 62368-1: 2014 (CB Scheme Report/Certificates)
Additional licenses issued for specific countries are available on request.
Emissions
- EN 55032: 2012, CISPR 32: 2015,
- EN 61000-3-2: 2014, EN 61000-3-3: 2013
Immunity
- EN 55103-2: 2009
- EN 61000-4-2: 2009, EN 61000-4-3: 2006 + A1: 2008 + A2: 2010,
- EN 61000-4-4: 2004 + A1: 2010, EN 61000-4-5: 2006, EN 61000-4-6: 2009,
- EN 61000-4-11: 2004
Environments: E2, E3 and E4
The product is also licensed for additional country-specific standards as
required for the International Marketplace.
Warning! This is a Class A product. In a domestic environment, this
product may cause radio interference, in which case, the user may be required
to take appropriate measures.
Recycling Notice
This symbol on the product or its packaging indicates that this product must
not be disposed of with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste for
recycling, please contact your local authority, or where you purchased your
product
Before Operation Please Read These Instructions
- Warning! Read and follow all warning notices and instructions marked on the product or included in the documentation.
- Warning! Do not use this device near water and clean only with a dry cloth.
- Warning! Since the Mains plug is used as the disconnection for the device, it must remain readily accessible and operable.
- Warning! Unplug this device during lightning storms or when unused for long periods of time.
- Warning! Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the device.
- Warning! Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the device, the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Warning! Do not open the chassis. There are no user-serviceable parts inside. Opening the chassis will void the warranty unless performed by an AJA service center or licensed facility
- Warning! Disconnect the external AC power supply line cord(s) from the mains power before moving the unit
- Warning! Only use attachments and accessories specified and/or sold by the manufacturer
Warranty and Liability Information
Limited Warranty on Hardware.
AJA Video Systems, Inc. (AJA Video) warrants that the hardware product, not
including software components, will be free from defects in materials and
workmanship for a period of five years from the date of purchase. AJA Video
provides a separate software warranty as part of the license agreement
applicable to software components. If the Customer brings a valid claim under
this limited warranty for a hardware product (hereafter, a “product”) during
the applicable warranty period, AJA Video will, at its sole option and as the
Customer’s sole remedy for breach of the above warranty, provide one of the
following remedies:
- Repair or facilitate the repair the product within a reasonable period of time, free of charge for parts and labor.
- Replace the product with a direct replacement or with a product that performs substantially the same function as the original product.
- Issue a refund of the original purchase price less depreciation to be determined based on the age of the product at the time remedy is sought under this limited warranty.
To obtain service under this warranty, the Customer must notify AJA Video of the defect before expiration of the warranty period and make suitable arrangements for the performance of service by contacting AJA Video support through the channels set forth on the support contacts web page at https://www.aja.com/support. Except as stated, the Customer shall bear all shipping, packing, insurance and other costs, excluding parts and labor, to effectuate repair. Customer shall pack and ship the defective product to a service center designated by AJA Video, with shipping charges prepaid. AJA Video shall pay to return the product to Customer, but only if to a location within the country in which the AJA Video service center is located. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO SOME OR ALL OF THE TERMS OF THIS PARAGRAPH MAY NOT APPLY TO YOU.
Limitation of Liability
Under no circumstances shall AJA video BE LIABLE IN ANY WAY FOR ANY LOST, CORRUPTED OR DESTROYED DATA, FOOTAGE OR WORK, OR FOR ANY OTHER INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOST PROFITS, OR FOR ANY THIRD PARTY CLAIM, IN CONNECTION WITH THE PRODUCT, WHETHER RESULTING FROM DEFECTS IN THE PRODUCT, SOFTWARE OR HARDWARE FAILURE, OR ANY OTHER CAUSE WHATSOEVER, EVEN IF AJA VIDEO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. AJA VIDEO’S LIABILITY IN CONNECTION WITH THE PRODUCT SHALL UNDER NO CIRCUMSTANCES EXCEED THE PURCHASE PRICE PAID FOR THE PRODUCT. The foregoing limitations apply even if any remedy set forth in this LIMITED WARRANTY fails of its essential purpose. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO SOME OR ALL OF THE TERMS OF THIS PARAGRAPH MAY NOT APPLY TO YOU.
Governing Law and Language; Your Rights.
This limited warranty is the only warranty provided by AJA Video on the
hardware product. It supersedes all prior or contemporaneous understandings
regarding such subject matter. No amendment to or modification of this
warranty will be binding unless in writing and signed by AJA Video. The laws
of the State of California, USA will govern this warranty and any dispute
arising from it. Any translation of this Agreement is intended for convenience
and to meet local requirements and in the event of a dispute between the
English and any non-English versions, the English version of this warranty
will govern. This limited warranty gives you specific legal rights and you may
have other rights that vary from jurisdiction to jurisdiction, some of which
are noted above.
HA5-Plus Mini-Converter v1.9 www.aja.com
References
- Complete Range of AJA Standalone Converters
- Download Mini-Config Software
- AJA Product Support Downloads
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>