Choiana CE1451_01_US Wireless Keyboard and Mouse Combo User Manual
- June 14, 2024
- Choiana
Table of Contents
Choiana CE1451_01_US Wireless Keyboard and Mouse Combo
Product Specification
Keyboard parameters
- Product size : 16.6×8.4×0.67inches
- Product weight : 1.54pounds
- Connectivity: 2. 4G Wireless Connection
- Charging time of Keyboard : 6h
- Battery capacity : 1600mAh
- Battery endurance : 15h (with backlight)
- Operating voltage: 3.7V
- Connection distance : 8~10m
- Power Saving : Without action in 90 seconds, the backlight will be out on keyboard.
Mouse parameters
- Mouse Battery Capacity: 650mAh
- Mouse DPI : 800-1200-1600
- Charging Time of Mouse : 3 hours
- Working Current(with Backlight): 17mAh
- Working Time(with Backlight): 30 hours
- Connection Distance : 10m
- Power Saving : Without action in 90 seconds, the backlight will be out on mouse.
- Jiggler Mouse :Press and hold the jiggler button for 5 seconds and the mouse’s red light will flash. When the mouse does not perform an action for 5 seconds, the mouse cursor will move around the screen to prevent the computer from hibernating. Press and hold again for 5 seconds and the red indicator light will turn off and it will exit jiggler mode.
Thank you for purchasing our products. If you have any question with this product, please feel free to contact us. Our email: [email protected]
You will receive
How to set up
- Step 1 : Please put the USB receiver into your computer. If your device comes with Type-C port, you can also use the Adapter.
Step 2 : Turn on the keyboard and mouse
- Step 3 : The keyboard and mouse will automatically connect to the computer, no driver needed.
Instruction of the keyboard backlight
- Press and Hold key, then press, key to turn on/ turn off backlight
- Press and Hold key ,then press key to increase backlight brightness
- Press and Hold backlight brightness key ,then press key to decrease
- Press and Hold backlight color. key, then press key to change
LED indicator
LED Indicator of the Keyboard
- Low Battery : the led green light will flash
- Charging: the led red light will turn on
- Fully Charged : the led red light will turn off
LED Indicator of the Mouse
- Charging: the led red light will turn on
- Fully Charged : the led red light will turn off
When the battery is running down, please charge the mouse to make sure it works properly.
Multimedia button description
The functions down below can be realized by combining FN button.
Instruction for charging
When you charge the battery, the power indicator shows constant light. When the battery is full of power, the light will turn off.
Note
The multimedia keys are for Win 8 and Win 10,for other systems, there may be
no function for some combined keys. This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.