Luckyear JX8002 Office Desk Chair Instruction Manual
- June 14, 2024
- Luckyear
Table of Contents
Luckyear JX8002 Office Desk Chair
NOTE :
If there is any issue with our chair, please contact After-Sales Support with
your order number at
chairservice888@163.com , we will solve
it for you immediately !
COMPONENTS
INSTRUCTIONS
step 1:
Attach the 5 casters(F) to the leg(A), then insert the cylinder(G) into the center of the leg(A).
step 2.
Connect the seat plate(E) to the seat(C) with screws J-1 and J-2.
( Note : Please place the corresponding screw according to the position in
the picture, place all 4 screws in the corresponding screw holes first, then
tighten them completely) Place the assembled seat into the cylinder.
step 3.
- Connect the armrest(D) to the seat with screws H
- Tilt the backrest(B) as shownin the picture, connect the backrest(B) to the armrest(D) by securing the lower screw hole with screw I.
step 4.
- With the backrest(B) in a 90° upright position, connect the backrest(B) to the armrest(D) by securing the upper screw hole with screw I.
- Install the decoration caps(K) onto all the screw holes.
FUNCTION
Q&A
Q : Does the chair have a warranty? What if parts are missing or damaged?
A : Dear customer, we have 5-year warranty. If there are problems such as
missing parts, product damage, or other unsatisfactory issues, please feel
free to contact us.
Customer Service Email: ————
Q : How to adjust the seat height?
A : When you sit on the chair. To raise the seat height, please lift your
body slightly while lifting the adjustment lever. To lower the seat height,
please increase the pressure down on your body while lifting the adjustment
lever.
Q : How to adjust the tightness of the backrest?
A : When you are taking a rest. Loosen the tension knob (under the seat),
pull out the adjustment lever, and you can turn on the rocking mode. Lean
back, and the backrest angle swings from 90°to 110°. When you are working, you
can push in the adjustment lever to lock, keeping the backrest angle at 90°
Q : If you feel the seat cushion is a little hard when you receive the
chair.
A : Because of the compression of the packaging, there is gas inside the
cushion, and you can press the cushion with your hands, and the cushion will
become soft.
Search“JX8002 Office Chair Installation Video”on YouTube Or through the link：
https://youtu.be/YCduVcoFx5o,
find the installation video to make your installation more convenient.
NOTE : When installing screws, please gently tighten the screws to the
screw holes (do not completely tighten them). After all screws are installed
to the corresponding screw holes, then completely tighten them one by one.
E-mail:chairservice888@163.com
If you encounter any problems during installation or use, please feel free to
contact us by email and we do happy to help you.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>