Upgrade 4VDC HD Display Stereo Radio User Manual

Upgrade 4VDC HD Display Stereo Radio User Manual

BEFORE INSTALLATION

Test method: Take the machine to the battery of the car and test it. This car stereo applies to a power supply voltage at 12V DC. Connect the red and yellow wires of the power cord of the machine together and connect it to the positive pole of the battery. The black wire of the power cord is connected to the negative pole of the battery. Wait for 10 seconds after connecting, press each button of the machine to see if the machine can boot normally. If it can be turned on, it means there is no problem, you can install it. If the test machine can not start normally, please again Confirm that you follow the steps of our test method in strict accordance with the operation. If the problem is still not solved, please contact our work in time.

Thank you for your cooperation.

REAR INTERFACE DESCRIPTION

• A1 Backc:  B1: Right Rear Speaker+
• OA2 Brake: B2: Right Rear Speaker-
• A3: Key 1: B2 : Right Rear Speaker-
• A4: Battery: xB4: Right Front Speaker-
• A5: Antenna: B5 : Left Front Speaker+
• A6: ILL: B6 : Left Front Speaker-
• A7: Ignition Switch : B7: Left Rear Speaker+
• A8: Ground: B8: Left Rear Speaker

1. SUB
2. AUX R IN
3. AUX LIN
4. AUDIO OUT L
5. VOUT
6. CAMIN
7. AUDIO OUT R
8. VOUT 2
9. CVBSIN

• When the yellow line B+ and the red line ACC have a 12V positive power at the same time, antithetical be turned on normally.
• The yellow line B+ keeps the power on and the machine has a memory function.
• 8 speaker cables, each cable can not be grounded, can not be shared, can not touch the line, otherwise there will be no sound output, output sound distortion, machine fever and so on.

REVERSING CAMERA INSTALLATION METHOD

If the reversing camera is not installed, please do not connect the REVERSE/BACK cable to any place. Please leave the cable unconnected, otherwise the machine will not display properly, or it will  automatically enter the reverse mode, which will cause the machine to fail. In case of such a situation, please disconnect the REVERSE/BACK line as soon as possible to avoid affecting the normal use of the user.

MACHINE FIXED REFERENCE METHOD

MAIN INTERFACE

1. HOME: Return to the main interface.
2. RADIO: Enter the radio mode to listen to the radio station.
3. USB: Playing music/video/pictures in a USB flash drive (Front USB).
4. TbF: Micro SD card interface for playing music/video/pictures inside the card.(Some model vsnotsupported)
5. BT: Enter the BT mobile phone music and BT call interface.
6. Phone Link: CarPlay / Android Auto / Mirror link function. Connect the machine and the mobile phone through a USB cable, and the car screen can be used as the second screen of the mobile phone.
7. AV IN: Enter the AV IN external audio mode interface.
8. Clock: go to clock settings.
9. Calendar: Enter the calendar interface.
10. Setup: Enter the system setting interface.

Calculator: Enter the calculator interface.

RADIO FUNCTION

1. FM: Band switching, switchable FM1-FM2-FM3.
2. Pre-stored stations, Can store 18 radio stations. When you need to listen to a containerization,just click it.
3. PS/AS: Browse radio stations/Automatically search and store full-band radio stations.
4. Short press to automatically search for the next station and play it; Long prehistorically search for radio stations, step by 0.05MHz for each press, then long press P1, P2, P3,P4, P5, Gravestone the radio station.
5. Enter the EQ sound effect setting interface.
6. ST/MO: Stereo/Mono.
7. COL/DZ: Long-range/short-range broadcast.
8. Back button.

VIDEO FUNCTION

TIPS: When a brake warning occurs, tum off the brake warning switch in the system settings. Downplay the video normally

BLUETOOTH FUNCTION

1. Switch interface.

2. Dial keypad interface.

3. Answer call key.

4. End call key.
   

5. Dial keypad interface.

6. Call history interface.

7. Contact interface.

8. BT pairing interface.

9. BT Music interface.

10. BT Music Prev / next track.

11. Pause music / resume playback

12. Backspace key.

Device Name:“ CAR-BT”
PIN Number: “0000”(If need)

1.Device Name:“CAR-BT_B3EB” 2.PIN Number:“0000”(If need)

Connection Method:

1. Power on the machine and turn it on.
2. Turn on the BT function on the mobile phone, click Search Device, when the mobile Elasticsearch for the BT device name of the current machine, click the device name to connect it.

Connection Method:

1.Power on the machine and turn it on. 2.Turn on the TB function on the mobile phone, click Search Device, when the mobile device list searches for the TB device name of the current machine, click the device name to connect it.

AV IN FUNCTION

You can connect an external audio player, such as a mobile phone or iPod, through the 3. confrontation hole.

STEERING WHEEL CONTROL

By learning, turn the buttons on the steering wheel into the function buttons of the player.

Wiring Method:

1. Locate the positive pole of the original car steering wheel button control line and connect it to the KEY line on the machine’s output line.
2. Locate the negative pole of the original steering wheel button control line and connect it to the ground (power negative) line on the machine’s  output line.

Learning Method:

1. First press and hold the function key on the steering wheel, and then click the desired function key on the car screen. At this time, the key on the screen will be always on. indicating that the learning is successful. Then learn the second button in the same way. Finally, press the confirm button to complete the study.
2. When the operation error needs to be re-learned, just press the reset button and then re-learn.

Phonelink (CarPlay & Android Auto & Mirrorlink)

When connected to the USB data cable, you can project the phone screen to thecar screen.

Apple CarPlay (CarPlay)

1. 1. Connect the iPhone and the machine with a USB data cable.
2. Then the machine will automatically enter the carplay interface.
3. After exiting. you can press Phonelink on the HOME to enter the carplay function again
   

Android Auto (Auto)

This feature is not supported in all countries, and “Google Play” services need to be available locally

1. Need to download and install “Android Auto” software in “Google Play”.
2. A mobile phone with Android 6.0 or higher must be used. Must use a valid data cable connection.
3. Connect Mobile Phone and the machine with a USB data cable. (It is not necessary to turn on the USB debugging mode.)
4. Then the machine will automatically enter the Android Auto interface.
   

Mirrorlink (Android)

When using an Android device, after connecting the USB data cable. you will be prompted to install the Mirrorlink software. After installation. Plug the data cable again, it will enter the screen mirroring mode. And it can be operated on both the player screen and the phone screen.

Only the image transfer is successful at this time. The sound can only be transmitted after the BT connection is successful.

Mirrorlink (iPhone)

When the device is plugged into the iPhone, the content on the phone’s screen is projected onto the car’s screen, and the sound is transmitted in sync.

SYSTEM SETTINGS

1. Basic Setup

2. Radio Area: Set the appropriate radio frequency according to the region.

3. Steering Wheel Learning: By learning, turn the buttons on the steering wheel into the function buttons of the player. (See the detailed operating instructions for steering wheel control learning in the previous introduction.)

4. Factory Set: Enter the password “113266” to enter the factory setting interface.

5. Sound Setup: Sound effect setting interface.
   

6. Display Settings: Brightness, contrast, hue, saturation can be set.

7. Background Image Settings: Toggle background image.

8. Screen Save Setting: Set screen saver switch and start time.

REMOTE CONTROL FUNCTION

1. Mute On/off
2. Mode: Switch For RADIO-AV IN-BT- USB-SD/Some models not supported)
3. Power On/off
4. Volume +
5. Enter: Play/Pause
6. Next Track
7. Volume –
8. End Call
9. Number Button
10. Menu
11. Previous Track
12. Answer Call

NOTE:

1. Before using the remote control, please remove the battery insulation paper at the bottom of the remote control.
2. If the remote control does not work, please take the battery off and wipe it. then put it back. generally it can be used normally. Still not working, it may be that the remote control battery is low, please replace the remote control battery

SPECIFICATION

• Power Supply Voltage: 12~14.4V DC, Negative Ground
• Max Current Consumption: 15A
• Max Output Power: 4X60W

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>