KANLO KAN2-08 LED Ceiling Lamp Instruction Manual
- June 14, 2024
- KANLO
Table of Contents
KAN2-08/12/18-WHO/WHR/BLO/BLR-4K
KAN2-08/12/18-WHO/WHR/BLO/BLR-4K-MS
Installation instructions
KAN2-08 LED Ceiling Lamp
**** Waste electrical products should not be disposed with household waste. Please recycle where facilities exist. Check with Your Local Authority or retailer for recycling advice.
| 1. Rated voltage, frequency. | 9. It does not work with a dimmer. |
|---|---|
| 2. Power, luminous flux. | 10. For internal and external use. |
| 3. Color temperature, colour rendering index. | 11. Replace the defective |
lamp cover immediately.
4. Appliance classes.| 12. Angle of illumination.
5. Lifetime.| 13. It does not work with cross and stairs connectors.
6. International Protection Rating.| 14. The minimum distance from the
illuminated object.
7. Protection against mechanical impacts.| 15. Working temperature.
8. Caution, risk of electric shock.| 16. Maximum working time.
Security
Before mounting, read the instructions and disconnect the power supply. Installation of the luminaire should be performed by a qualified user authorized to mount electrical devices depending on the applicable regulations in a given country, in accordance with the mounting diagram. Modifications to the product may cause threat and loss of warranty.
Maintenance
All maintenance work should be carried out after disconnecting the power supply. The product temperature may rise to an elevated value. Before commencing maintenance, make sure that the product temperature is safe to make it. Guarantee unrestricted air supply, do not cover the product. Use dry and delicate materials for cleaning. The luminaires are not designed for cooperation with dimmers and automation elements that may have an impact on shortening the product’s service life. Do not use chemical agents. Product not adapted to work in an environment with unfavorable conditions, i.e. high dustiness / humidity, water, explosive zones, vibrations, chemical fumes.
Recommendations
Failure to follow the instructions in the manual may result in a fire,
electric shock, burns or other damage. Bemko sp. O.o. is not responsible for
failure to comply with the above recommendations. We also reserve the right to
make changes to the manual – the current version is available at www.bemko.eu.
EU DECLARATION OF CONFORMITY
No: C0107/2022
Manufactorer: Bemko Sp. z o.o.
Adress: ul. Bocznicowa 13
05-850 Jawczyce
hereby declare, that product:
LED Celling Lamp
KAN2-08-BLO-4K-MS, KAN2-08-WHO-4K-MS, KAN2-12-BLR-4K-MS,
KAN2-12-WHR-4K-MS, KAN2-18-BLR-4K-MS, KAN2-18-WHR-4K-MS
Is in compliance with the following directives / regulations:
2014/53/EU| of 16 April 2014 on the harmonization of the laws of the Member
States relating to the making available on the
market of radio equipment and repealing Directive 1999/5/EC
---|---
2011/65/EU| of 8 June 2011 on the restriction of the use of certain hazardous
substances in electrical and electronic equipment
2009/125/EC| of 21 October 2009 establishing a framework for the setting of
ecodesign requirements for energy-related products
For evaluation below standards/technical documentation were used:
EN IEC 60598-1:2021
Luminaires — Part 1: General requirements and tests (IEC 60598-1:2020)
EN IEC 60598-2-1:2021
Luminaires. Particular requirements. Specification for fixed general purpose
luminaire
EN 62471:2008
Photobiological safety of lamps and lamp systems
EN IEC 61000-3-2:2019
Electromagnetic compatibility (EMC) — Part 3-2: Limits — Limits for harmonic
current emissions (equipment input current ≤ 16 A per phase) (IEC
61000-3-2:2018)
EN 61000-3-3:2013
Electromagnetic compatibility (EMC) — Part 3-3: Limits — Limitation of voltage
changes, voltage fluctuations and flicker in public low-voltage supply
systems, for equipment with rated current <= 16 A per phase and not subject to
conditional connection
ETSI EN 300 440 V2.2.1:2018
Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz
frequency range; Harmonised Standard for access to radio spectrum
ETSI EN 301 489-1 V2.1.1:2017
Technical requirements — Harmonised Standard covering the essential
requirements of article 3.1(b) of Directive 2014/53/EU and the essential
requirements of article 6 of Directive 2014/30/EU
ETSI EN 301 489-3 V2.1.1:2019
Electro Magnetic Compatibility (EMC) standard for radio equipment and
services; Part 3: Specific conditions for Short-Range Devices (SRD) operating
on frequencies between 9 kHz and 246 GHz; Harmonised Standard covering the
essential requirements of article 3.1(b) of Directive 2014/53/EU
EN 62493:2015
Assessment of lighting equipment related to human exposure to electromagnetic
fields
EN IEC 63000:2018
Technical documentation for the assessment of electrical and electronic
products with respect to the restriction of hazardous substances (IEC
63000:2016)
Jawczyce 07.07.2022
Name, surname and function of the authorized person to issue a declaration of conformity
BEMKO Sp. z o.o.
ul. Bocznicowa 13 05-850 Jawczyce tel. 0 22 732 11 85
www.bemko.eu tel./fax: 0 22 732 11 86
Polska, woj. Mazowieckie, m.st. Warszawa, gmina m.st. Warszawa, miejscowość
Warszawa
KRS – 0000278651, NIP – 118-18-84-396, REGON – 140893162 Kongo Santander Bank
Polska S.A. Nr Rechunk: 81 1910 1048 2787 8320 2675 0001
ul. Bocznicowa 13
05-850 Jawczyce
www.bemko.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>