ICUIXIAN 8×8 The HD HDMI Matrix User Manual

ICUIXIAN 8×8 The HD HDMI Matrix

Specifications

• Pure hardware architecture
• No operating system or hard disk
• No maintenance required
• Avoids industrial control system conflicts, blue screen, and computer virus intrusion
• Switching time: less than 1 second
• Stable and reliable
• Data is cured before factory
• Power loss memory function and power off site protection function
• Interface bandwidth: 6.75Gbps
• Maximum resolution: 1920×1200@60Hz
• Supports fast switching operation
• Supports infrared remote control control
• Supports basic matrix control instructions and functions
• Flexible control mode: key panel, remote control, and RS-232 communication interface
• All-metal chassis compatible with standard-inch cabinets

Product Usage Instructions

Note
For the safety of yourself and the equipment, please read the safety instructions carefully before using the device. If you have any questions during use, refer to this instruction manual first. If you still have questions, please contact us for assistance.

Box List

Product Profile

Product Characteristics

• Pure hardware architecture, no operating system or hard disk
• Avoids industrial control system conflicts, blue screen, and computer virus intrusion
• Switching time: less than 1 second
• Stable and reliable; system data has been cured before the factory
• Power loss memory function and power off site protection function
• Interface bandwidth of 6.75Gbps; supports maximum resolution: 1920×1200@60Hz
• Supports fast switching operation and infrared remote control control
• Supports basic matrix control instructions and functions
• Flexible control mode: key panel, remote control, and RS-232 communication interface
• All-metal chassis compatible with standard-inch cabinets

Application Topology
No information provided in the user manual.

Chassis Appearance
No information provided in the user manual.

Case Size
The equipment dimensions are as follows:

Model| Front Panel Length A (mm)| Case Height B (mm)| Case Depth C (mm)| Back Width D (mm)
---|---|---|---|---
1U| 483| 45| 192| 430
2U| 483| 89| 265| 440

Structure Description
No information provided in the user manual.

FAQ

• Is this product compatible with different remote control equipment?
  Yes, this product provides a 2-way standard RS-232 communication interface RJ45 port, which is compatible with various environments and convenient for users to use with different remote control equipment.

• Does this product support power loss memory function?
  Yes, this product has a power loss memory function to retain settings even during power outages.

• What is the maximum resolution supported by this product?
  This product supports a maximum resolution of 1920×1200@60Hz.

Note

Warm tips:

• For the safety of your and the equipment, be sure to read the safety instructions carefully before using the device.If you have questions during use, read this instruction first.There is a detailed description of the equipment operation in the main text. If you still have questions, please contact us, and we will give you a satisfactory reply as soon as possible.
• This instruction is subject to version changes without notice.
• The Company reserves all rights to this product!
• Note 1 : This equipment is an information technology equipment, and its radio disturbance characteristics are in accordance with the requirements of Class A information technology equipment.
• This is a Class A product. In the living environment, this product may cause radio interference. In this case, the user may be required to take practical measures against the interference.

Box list

Product profile

The HD HDMI Matrix is a high-performance intelligent matrix switchgear specially designed for the switching of audio and video signals to synchronously switch various audio and video input signals to any channel in the audio and video output channel.Matrix equipment is mainly used in radio and television engineering, multimedia conference hall, large screen display engineering, television teaching, command and control center and other occasions.This product has power off field protection, LCD LCD display, audio and video synchronous switching functions, and RS232 communication interface, can be easily used with personal computer, remote control system or various remote control equipment and control system.

Product characteristics

• The product adopts pure hardware architecture, no operating system, no hard disk, no maintenance, avoid industrial control system, hardware conflict, blue screen and computer virus intrusion; can be frequently switch and off, start time is less than 1 second; stable and reliable, system data has been cured before the factory, accidental power failure will not cause equipment damage;
• Interface bandwidth of 6.75Gbps, supports maximum resolution: 1920×1200@60Hz;
• Support fast switching operation; support infrared remote control control;
• Supports basic matrix control instructions and basic matrix functions;
• With power loss memory function, with power off site protection function;
• Flexible control mode, with key panel and remote control operation, but also provides a 2-way standard RS-232 communication interface RJ45 port, compatible with various environments, convenient for users to use with various remote control equipment;
• All-metal chassis compatible with standard-inch cabinets.

Application topology

Chassis appearance

Note: The quantity of equipment interfaces shall be subject to physical objects

Case size
The equipment dimensions are as follows:

Matrix dimension Table:

Structure description

• Schematic representation of the 7100HD-1616 front panel

• Schematic representation of the 7100HD-1616 rear panel

1. LCD display
2. power supply indicator lamp
3. IR infrared reception window
4. Running lights
5. Front Panel Keys
6. DC12V power supply interface
7. RJ45 serial port control input port
8. RS-232 serial port control output port
9. RS-232 serial port control input port
10. HDMI Input interface area
11. HDMI Output interface area

Control interface descriptio

• Description of the RS232 control interface
  • The matrix Switcher provides a 2-way RS-232 serial interface (a DB9 female connector, a DB9 male connector) by which the matrix can be controlled. Pin description for the RS-232 IN port DB9 master connector:

  * Pin description for the RS-232 OUT port DB9 male connector:

• **RJ45 serial input pin description:

**

Equipment installation

Installation environment
When installing the equipment, try to avoid strong backlight and backlight scenes.Please keep the ambient light bright and shine well.

Signal connection
The interface of HD matrix series is divided into signal input and output interface, INPUT part is the input terminal of signal, and OUTPUT part is the signal output terminal. Please use the corresponding cable to connect the input and output equipment of the signal source (e. g. DVD machine, computer, etc.) device to the matrix input terminal (INPUT), and connect the matrix output (OUTPUT) to the input interface of the signal use device (such as LCD screen, projector, television, etc.).

RS232 communication interface connection
The rear panel of the HD matrix series provides 2 standard RS232 communication interfaces.OneRS232interfaceofRS232OUT,multiplematrixcanbeconnectedinseries, and multiple matrix can be controlled and set using the RS232 interface of only one computer; connect the serial communication port of the computer to the RS-232 communication port of the HDMI matrix host with the RS-232 connection line. After the control software is installed, the matrix can be controlled by the computer.Users can use the software attached to the matrix as computer control software or write the control software, details can refer to the relevant instructions of the user manual control command.
Note: When the Matrix RS-232 ports are connected to a computer or central control, note the line order of TXD and RXD, considering the pin definition of the other party’s device.

Power connection
A standard 220V power supply cable is standard in the matrix package, with the AC220V50/60HZ connector on the back of the bus end and the male end is connected to the 220V 50/60HZ AC power supply.To ensure the safety and normal operation of the equipment, note that single-phase three-line AC power with protected ground must be used.

Serial communication protocols

Control parameters
When using serial port control, set the port rate to 9600,8-bit data bit, 1-bit stop bit, no check bit.

Communication Control Protocol
The following protocols support all models including 04,08 and 16:

Operating instructions

Key of front pane

• standby picture
  Press any state “ESC” in the front panel to return to the previous level interface (different model, slightly difference).

• The MENU dish menu key
  Press the front panel button in the standby state. “MENU” can enter the main menu page, under which you can choose signal switch, plan call, common functions, and system settings.

• CALL function key
  Press the “CALL” key in the front panel to enter the plan management menu in which scenario save and call functions.

• OK function key
  The most commonly used buttons, selection functions and determining changes are determined by pressing “OK”.

• ALL function key
  Used to select all output channels when making signal switching.

• LOCK function key
  In any interface, after “Lock”is pressed, the panel button is disabled, “ Lock ” is repeatedlypressed,unlock,“Lock”state button produces green light.

• IN/OUT function key
  For “signal switch”, the input and output channel selection by clicking the IN/OUT button into the signal switch interface, or the “signal switch in the main menu selection” after the input and output channel.(Use with “0-9” digital keys)

Technical parameters

Host model and technical parameters

Input and output port parameters

Common faults and maintenance

• When the image of the peripheral display device connected to the matrix overlaps, for example, the projector has an overlapped image, it may be that the projector is not adjusted properly or the quality of the cable is not up to standard. The corresponding button of the projector should be adjusted or the cable should be replaced.
• When there is color loss or no video signal output, it may be that the audio and video interfaces are poorly connected.
• When the remote control cannot control the matrix:
  1. The battery may be dead, please replace the battery;
  2. The remote control may be broken, please repair it.
• When the serial port cannot control the matrix, check whether the communication port set by the control software corresponds to the serial port of the connected device; check whether the communication port of the computer is good.
• No corresponding image output during matrix switching:
  1. Check the corresponding input for a signal.(Oscilloscope or multimeter can be detected.) If there is no signal input, maybe the input line is broken or the connector is loose, and replace the wiring.
  2. checks for the signal at the corresponding output end.(Detection with oscilloscope or multimeter) If there is no signal output, maybe the output line is broken or the connector is loose, replace the wiring.
  3. Check whether the output port number is consistent with the controlled port number. Do not belong to the above three situations, may be the host internal failure, please send to the professional for maintenance.
• If the POWER lamp is not on and the LCD is not displayed and the operation is not responsive, check the equipment power input for good contact.
• The output image is disturbed, and it is possible that the input and output equipment is not well grounded.
• When unplugging or plugging in the audio and video interface, if you feel obvious static electricity, it is possible that the ground wire of the power supply of the equipment is not well grounded. Please ground it according to the correct method, otherwise it is easy to damage the host and shorten the life of the host.
• LCD displays normal, the communication port has return code, but no image output or no audio output:
  1. Maybe the audio and video interface is loose, just replace it;
  2. The wiring may be broken, just replace it;
  3. The wiring may be broken, just replace it;
  4. If the matrix panel keys, communication port and remote control are not under control, the host interior may be damaged, please give them to professionals for maintenance.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>