AUXOAUDIOTEK Y Tesla Head Up Display Installation Guide

AUXOAUDIOTEK Y Tesla Head Up Display

INSTALLATION INSTRUCTIONS

Step 1 Disassemble the Dashboard Decoration Cover in left Side

Step 2 Disassemble the Dashboard Decoration Cover in Right Side

Step 3 Remove the Dashboard Cover slightly from one side to another side

Step 4 Pick up the Cover

Step 5 Insert the Cables from the T3 info the 37th Hole on the Cover

Step 6 From left to right count 37 Holes and Insert the 2 Cable from T3 into the Holes

Step 7 Put the T3 in to the Board with right position

Step 8 Install the fix Steal in back side of the Cover

Step 9 Remove the Buckles from the Glove Box

Step 10 Remove the front right seat A-pillar baffle

Step 11 Original car blue protocol interface A

Step 12 Original car white power interface B

Step 13 Remove the power port C of the original vehicle

Step 14 Schematic diagram of power cable interface

Step 15 Power cable A 1 is plugged into the original car A interface

Step 16 Power cable B1 interface pair plug original car B

Step 17 Power Cable C1 is paired with the original car C

Step 18 Routing the Cable according to the position shown

Step 19 Use Tape to fix the cable

Step 20 Connect the Cables with the T3

Step 21 Put back the Cover on Dashboard

Step 22 Installation is Complete

Installation Precautions:

When installing, it needs to be powered off and all functions are tested before loading

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>