IOOIOO V231028 Portable Inkless Wireless Printer User Manual

IOOIOO V231028 Portable Inkless Wireless Printer

IOOIOO Peripage Printer

Specifications

• Model: V231028
• Bluetooth connectivity
• USB cable connectivity
• Print resolution: 203DPI

Product Usage Instructions

How to Connect with Phone
To connect the printer with your phone, please follow the steps below

1. Activate the Bluetooth on your phone.
2. Download and install the Peripage APP from the app store.
3. Open the Peripage APP and follow the on-screen instructions to pair the printer with your phone.
4. Once paired, you can start printing from your phone using the Peripage APP.

How to Connect Windows PC with USB Cable
To connect the printer with your Windows PC using a USB cable, please follow the steps below

1. Connect one end of the USB cable to the printer and the other end to your Windows PC.
2. Ensure that the printer is powered on.
3. Your Windows PC should automatically detect the printer and install the necessary drivers.
4. Once the drivers are installed, you can start printing from your Windows PC.

How to Connect Mac PC with USB Cable
To connect the printer with your Mac PC using a USB cable, please follow the steps below

1. Connect one end of the USB cable to the printer and the other end to your Mac PC.
2. Ensure that the printer is powered on.
3. Your Mac PC should automatically detect the printer and install the necessary drivers.
4. Once the drivers are installed, you can start printing from your Mac PC.

How to Install Letter Rolled Paper
To install letter rolled paper in the printer, please follow the steps below

1. Remove the two holders that stop the rolled letter paper.
2. Insert the rolled letter paper into the printer’s paper slot.

How to Install Letter Folded Paper
To install letter folded paper in the printer, please follow the steps below

1. Ensure that the folded paper has a black mark for the printer to recognize.
2. Insert the letter folded paper into the printer’s paper slot.

How to Make the Curled Paper Flat
To make the curled paper flat, please follow the steps below

1. Place the curled paper on the edge of a desk.
2. Slide the paper along the edge of the desk, applying pressure to flatten it.

FAQ and Troubleshooting

Problem: Bluetooth Connect it in the wrong way.

• Root Cause : The phone is in lower battery or power saving mode.
• Solution : Charge the phone. Do not try to connect it at the phone Bluetooth list, please connect it within the Peripage APP, after activating the Bluetooth of the phone. Please refer to the step-by-step guideline in this document chapter 3.1 on how to connect the Android, iPhone with Bluetooth.

Problem: Windows PC could not connect with the printer.

• Root Cause : Try to connect the printer in the phone Bluetooth list, which is a wrong way to connect the printer with Bluetooth. The phone is not compatible, such as the phone is too old. The printer is connecting with the 1st phone, the 2nd phone could not connect.
• Solution : Follow the video on our product page to connect it by Bluetooth or USB. Change to a newer phone to test and confirm if the phone is causing the problem. 1. Disconnect with the 1st phone, and connect the 2nd phone again.

Problem: Why print nothing?

• Root Cause : The paper is upside down. Only one side is printable.
• Solution : Please print with another side of the paper. Only one side of the paper is printable.

Problem: The print quality is not clear.

• Root Cause : The font in your document is not supported by your OS system. Density/Concentration/Darkness is not set to max 5, but 2. The line in the font is too small. The text font size is too small. The picture is too small. Picture and text are mixed.
• Solution : Choose a font supported by your OS system, such as Arial or Arial Black. Set density/Concentration/Darkness to 5. Change to other fonts with a thick line. Enlarge the font size. Enlarge the picture in the paper.

Problem: Why print at the broken line of the folded paper when printing about 10 pages?

• Root Cause : The thermal paper quality is not good. The DPI (Dots Per Inch) is just 203DPI, but not 300DPI. The folded paper without the black mark for the printer to recognize it is not well compatible with the printer.
• Solution: Use good quality general thermal paper or use IOOIOO thermal paper available at our store. Buy our high DPI resolution version of print A40 Plus with 300DPI. If you are using other not compatible paper, please set the parameter to be 11 (or the actual shifting of each page).

FAQ

Q: How can I contact customer service?
A: You can contact our customer service via email at iooioo@qq.com or through WhatsApp at 008614775058163.

Q: Where can I find the quick start video?
A: You can find the quick start video on our product page. Here are the links

• How to connect with phone?
• How to connect Windows PC with USB cable?
• How to connect Mac PC with USB cable?
• How to install letter rolled paper?
• How to install letter folded paper?
• How to make the rolled curled paper flat?

IOOIOO peripage printer video, FAQ, trouble shooting, quick start, user manual V231028 Customer service email: iooioo@qq.com, whatsapp: 008614775058163

Quick Start Video (Video also available at product page)

How to connect with phone?| https://youtu.be/dwxlKg2wvLA
How to connect Windows PC with USB cable?| https://youtu.be/G–Wj7Tbe8g
How to connect Mac PC with USB cable?| https://youtu.be/C_Wut0QmEEA
How to install letter rolled paper?| https://youtu.be/n2WEGj-94bo
How to install letter folded paper?| https://youtu.be/CV_Q1Dc1j-M
How to make the rolled curled paper flat?| https://youtu.be/DNs9e4jS00k

FAQ and trouble shooting

Bluetooth could  not connect with phone   or Windows PC (Every  unit was double tested  by seller before shipment)| Connect it in the wrong way.| Follow the video on our product page to connect it by Bluetooth or USB.
The phone is in lower battery power saving mode.| Charge the phone.
Try to connect the printer in the phone Bluetooth list, which is a wrong way to connect the printer with Bluetooth.| Do not try to connect it at the phone Bluetooth list, please connect it within the Peripage APP, after activating the Bluetooth of the phone. Please refer to the step-by-step guideline in this document chapter 3.1 on how to connect the Android, iPhone with Bluetooth.
The phone is not compatible, such as the phone is too old.| Change a newer phone to test and confirm if the phone causing the problem.
The printer is connecting with the 1st phone. The 2nd phone could not connect.| 1. Disconnect with the 1st phone, and connect the 2nd phone again. Charge the phone.
How to make the curled paper flat?| The paper was printed from the rolled paper|

1. Slide at the edge of the desk to make it flat, the sharper the edge, the better it will be
2. Buy the folded paper, but not rolled paper.

The  rolled letter size paper could not be| The two holders are not removed| Remove the two holders which stop the rolled letter paper.
installed.|
****| |
---|---|---
Why   print nothing?| The paper is upside down. Only one side is printable.| Please print with another side.
The print quality is not clear| The font in your document is not supported by your OS system.| Choose the font supported by your OS system, such as Ariel or Ariel Black, and so on.
Density/Concentration/Darkn

ess is not set to max 5, but 2.

| Set density/Concentration/ Darkness to 5
The line in the font is too small| Change to other fonts with thick line
The text font size is too small| Enlarge the font size
The picture is too small| Enlarge the picture in the paper
Picture and text are mixed| Use phone image printing
The thermal paper quality is not good| Use the good quality general thermal paper or use the IOOIOO thermal paper which is available at our store
The DPI (Dots Per Inch) is just 203DPI, but not 300DPI| Buy our high DPI resolution version of print A40 Plus with 300DPI
Why print at the broken line of the folded paper when printing about    10 pages| The folded paper without the black mark for printer to recognize it is not well compatible with the printer.| If you are using other not compatible paper, please set the parameter to be 11(Or the actual shifting of each page) as the following
continuously ?| | **** Or buy the peri page compatible folded paper at our store or at amazon.
---|---|---
Why  some tattoo transfer paper      was stuck or the tattoo paper are melted?| The lines in the drawing are with too thin.

| Print thick lines in the drawing.
The tattoo paper was too bright to mislead the sensor to stop the printing.| Block the sensor with label
The newer version V1.4.3_SD upgrade the printing quality, it does  not support  tattoo printing any more.| Double click the power button to print the version.
The transfer paper was melted, because the printer head temperature is too high to the transfer paper.|

1. Adjust the darkness of the printing from 5 to 0.
2. Print the transfer paper upside down.

What’s the meaning of the   LED status| Green light on| Normal use status/fully charged
Red light on| Cover open/No paper/Over-heat/Charging
Green light flashing| Folded paper mode, please insert paper
Red light flashing| Low battery, please charge
How to  handle the charging| 5V-2A, recommend to use phone charger to charge it
Recommend to fully charge it before using
Please charge it every 3 months if you did not use it for long time to avoid the battery not being able to be charged.
How to clean printer head| Step1: Turn off printer, and open the cover, and take out the paper
Step2: Dip a cotton cloth or cotton swab with medical alcohol, and wipe gently along the center to the periphery of the printer head
Step3: After cleaning the printer head, do not use it immediately. Please wait for 1 to 2 minutes, use the printer after the alcohol has completely evaporated.
What version  of  phone  and PC  are support?|

• Windows 7 8 10 11
• MAC PC 10-13.6 ANDROID phone OS 8-13
• Iphone 12-16

---|---
|
|

Step-by-step Quick Start Guide

How to install newest Windows PC driver?

• Step1: Double click the power key to print the hardware version (When the paper is installed and the power key is green), according to the hardware version to click the following link to download the newest driver:

• https://www.ileadtek.com/resource/drive/cn/%E7%88%B1%E7%AB%8B%E7%86%8APeriPage_A4_203dpi_PC%E9%A9%B1%E5%8A%A8%E5%AE%89%E8%A3%85%E5%8C%85.zip
• https://www.ileadtek.com/resource/drive/en/PeriPage_A40_PC_driver_installation_Windows_3.0.1.435.zip
• Step2: Click the global icon to change the language into English. And then click Next.
• Step3: Long press the power button of the printer for 2 seconds, until the green light is on. Then plug in the USB cable.
• The following page will show up, then click next continuously.
• When the printer is on, double click the printer power button to print out the hardware version, and find out the driver is one of Peripage A40, PPG A40 SD (For 200 DPI version),Peripage A40, PPG A40 HD(For 300 DPI), Peripage A40 or Peripage A40+(For 300 DPI version)
• Then select the right driver for your printer.
• Step5: Deselect the item ”Use this printer as default”, then click next.
• Step4: If the printer does not show up on the searching printer page, please make sure that: before plugging in the USB cable, the green light of the printer is still on. And make sure the “print spooler” service is running on your PC.
• If you need to activate the “print spooler” service for your PC. Please select Windows logo key + R to open Run. Then type “services.msc”, and select OK.
• • Then Right-click “Print Spooler”. Then select Start.
• Step5: Open the file to be printed, such as a TXT file. And select “PeripageA40” and then click “More settings”.
• Step6: Then select actual paper size, such as “A4[204*291]”. And then select the “Density” to be 5.
• Step8: Click OK button to print

How to install newest Mac PC driver?

• Step1: Double click the power key to print the hardware version (When the paper is installed and the power key is green), according to the hardware version to click the following link to download the newest driver

• https://www.ileadtek.com/resource/drive/cn/%E7%88%B1%E7%AB%8B%E7%86%8APeriPage_A4_203dpi_Mac%E6%89%93%E5%8D%B0%E9%A9%B1%E5%8A%A8%E5%AE%89%E8%A3%85%E5%8C%85.zip
• https://www.ileadtek.com/resource/drive/en/PeriPage_A40_PC_driver_installation_Mac_3.0.1.434.zip
• Step2: Click and run the .pkg file.
• Step3: Go to System Preference->Security&Privacy, then click the following red rectangle sequentially.
• Step4: Go to System Preference->Printers&Scanners, then click the following red rectangle sequentially.
• Step5: Long press the power button of the printer for 2 seconds, until the green light is on. Then plug in the USB cable.

The following page will show up, then click the red rectangle consequentially.

Note
When the printer is on, double click the printer power button to print out your printer hardware version, and find out the driver is one of Peripage A40, PPG A40 SD (For 200 DPI version),Peripage A40, PPG A40 HD(For 300 DPI), Peripage A40 or Peripage A40+(For 300 DPI version)

Step5: Open the file to be printed. Such as a Microsoft Word.

How to install APP in iPhone and android? How to print email in iPhone

and android?

How to install APP and connect the printer in iPhone and android phone by Bluetooth?

• Step1: Search “Peripage” in apple store or google play and install it.
• Step2: Long press the power button of the printer for 2 seconds, until the light is green. If the light is not green, it will not connect the phone.
• Step3: Turn the phone Bluetooth on.
• Step4: Run the Peripage app. And connect the printer as the following picture
• How to print email in iPhone?
• How to print gmail in android phone?
• Save the email as PDF and run Peripage to print the PDF file.

How to print 4”x 6” shipping label in Windows?

• Step1: After installing the printer driver, install the 4”x6” shipping label by moving the two stoppers to the 4” locations successfully.
• Step2: Go to windows settings.
• Step3: Create a 4*6inch form.
• Step4: Right click the 4”x6” shipping PDF file and open with edge browser.
• Step5
• Step6
• Step7: The print will come out.

How to print 4”x6” shipping label in Mac PC?

• Step1: After installing the printer driver, install the 4”x6” shipping label by moving the two stoppers to the 4” locations successfully.
• Step2: Open the 4”x6” shipping label file with Sarafi.
• Step3: Click the print menu.
• Step4
• Step5
• Step6
• Step7
• Step8: The print will come out as the following.

How to connect Windows PC with printer by Bluetooth?

• Step1: Turn on the printer until the green LED is on and turn the Bluetooth of the PC to be ON.
• Step2: Run the driver and select Bluetooth as the following and click Next
• Then windows will pop up the following windows
• Click this window
• Click Allow
• Click Close
• Step3: Select the following item, and click next
• Step4: When the printer is on, double click the printer power button to print out the hardware version, and find out the driver is one of PPG A40 SD (For 200 DPI version), PPG A40 HD(For 300 DPI), Peripage A40 or Peripage A40+(For 300 DPI version)
• Step5: Deselect the item ”Use this printer as default”, then click next.
• Step6: Click “Print Test Page”, it will print out a test page.

References

• Document

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>