BIGFISH 651UC Universal Travel Adapter User Manual

BIGFISH 651UC Universal Travel Adapter

PRODUCT OVERVIEW

1. Multi-socket
2. US/AU/UK/EU Plugs
3. LED Indicator
   • LED solid: normal operation
   • LED does not light: Possible overload, Unplug one device and check the status indicator again.
4. USB-A1/A2 Ports
5. USB-C1/C2 Ports

SPECIFICATIONS

• Model: 651UC
• AC Input: 100V-250V,50/60Hz
• Rating: 100-250Vac 10A Max , 2500W Max
• Single USB-A1/A2 Output: 5.0V 2.4A 12.0W Max
• Single USB-C1/C2 Output: 5.0V  3.0A 15.0W Max
• Total Output: 5.0V  4.2A 21.0W Max
• Dimensions: 72.5mm x 50mm x 53.7mm
• Operating Temperature: 0 ºC – 25 ºC

APPLICABLE OUTLETS

1. Adapter can accept Type A, B, C, E, F, G, I, J, L, N plugs.
2. The adapter can plug into Type A,B,C,D,E,F,G,H,I,J,K,L,M,N and O outlets.

POLE UNEARTHED DEVICES

The product is suitable for use with most electronic devices up to 2500W at 250V and 1000W at 100V. It can be used with a multitude of appliances such as Laptops, Small travel hair dryers, Travel irons, Electric fans, Table lamps, Electric razors,etc. Please check the safety data sheet or data plate on the device to find this information before plugging it in.

USB DEVICES

Camera, Smartphone, Tablet, Portable Game Console, Bluetooth speaker, Power bank,etc.

HOW TO USE THE ADAPTER

Feature
Built-in multi-nation plugs can be selected to fit all outlets in different countries. The safety function switch ensures only one plug is energized.

Attention

1. Please make sure that the button is reset when the button is pushed out and retracted to the bottom, and if the button is not reset, it means that the pug has not been pushed in place and will affect the normal use.
2. Only one plug type can be used at one time by sliding the knob selection, other plug-pins are locked automatically.

Slightly press the button and slide the down for the USA plug completely as shown. make sure the contact blades are turned to the parallel position. Recover the plug: press and hold the “USA” button to release and continue to pull up, until the plug completely pulls the top and then release the button, then the button will reset and lock the plug.

Slightly press the button and slide to the down for the AUS plug completely as shown Make sure the contact blades are turned to the parallel position. Recover the plug: press and hold the “AUS” button to release and continue to pull up, until the plug completely pulls the top and then release the button, then the button will reset and lock the plug. Slightly press the button and slide the down for the UK plug completely as shown. Pull out the insulated ground pin from the housing. Recover the plug: press and hold the “UK” button to release and continue to pull up, until the plug completely pulls the top and then release the button, then the button will reset and lock the plug. Slightly press the button and slide the down for EU plug completely as shown Make sure the contact blades are turned to the parallel position. Recover the plug: press and hold the “EU” button to release and continue to pull up, until the plug completely pulls the top and then release the button, then the button will reset and lock the plug.

REPLACEMENT OF THE FUSE

1. Take out 1
2. Take out 2 , and put 2 into the original position of 1 , the adapter could work again.
3. You also could change the new fuse. standard: 250Vac 10A, 6.3*25.4mm

Notes

1. You should remove all the device before you change the new fuse.
2. Please confirm whether there is water flowing out from the access equipment in the power rating.
3. Please confirm whether the product is wet and whether there is water flowing out.

CAUTION

• Always disconnect the Adapter from the outlet when not in use. Before use, please read this instruction carefully! This product does not convert voltage(AC-AC), in order to avoid possible damage to your device or other safety hazards, please make sure the power outlet you intend to use has the proper voltage to run your device before using this adapter.
• Indoor use only.
• Misuse can lead to electrical shock.
• The length of the USB cable should be less than 3M.
• The travel adaptor is for temporary use only and it shall not be used permanently.
• Against inserting an adaptor into another adaptor shall be provided by the manufacturer.
• No grounding,This product is for use with unearthed or double insulated appliances only.

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority for recy-cling advice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>