CARBON8 209060 One Touch Sparkling Water Maker and Dispenser User Guide
- June 14, 2024
- CARBON8
Table of Contents
- CARBON8 209060 One Touch Sparkling Water Maker and Dispenser
- Product Information
- Usage Instructions
- IMPORTANT SAFETY INSTRUCTIONS
- CO2 CYLINDER
- PRODUCT OVERVIEW
- SETUP AND INSTALL THE CO2 CYLINDER
- Start carbonating
- GAS, UV DISINFECTION, AND WATER FILTER
- LIMITED WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CARBON8 209060 One Touch Sparkling Water Maker and Dispenser
Product Information
Specifications
- Product Name: Carbon8 Infinity Stream
- Product Type: Instant Sparkling Water Dispenser
- Intended Use: Private use (at home and in the office)
- Guarantee : Household use only
Important Safety Instructions
- Read all the instructions before using the appliance.
- The Carbon8 is designed for private use and is intended for household use only.
- The manufacturer is not responsible for any consequences and faults caused by not following the instructions.
-
Special Reminder
Before the first use, rinse the water tank with lukewarm water. Alternatively, you can use a soft cleaning sponge (or cloth) and a non- irritating detergent to clean the water tank. -
Caution for Ultraviolet radiation:
The Sparkling Water Maker uses Ultraviolet light. Do not look at the UV light directly, as it can irritate the eyes and skin.
Usage Instructions
- Do not use the product around flammable objects, and do not place it next to objects that can be easily deformed by heat.
- Always place the product on a dry, stable, flat, and horizontal surface.
- Keep the product away from heat and in or close to areas where the surrounding temperature is relatively hot (e.g. stoves or other sources of heat).
- Never use the device near an open fire (such as burning candles) or on hot surfaces.
- Never heat the product in a microwave oven.
- Do not touch the product with sharp or abrasive objects to avoid damaging the inner liner of the water tank and the surface of the product.
- Under no circumstances use aggressive cleaning agents, cleaning alcohol, or other chemical solutions since these can penetrate the housing or impair functionality.
- To reduce the risk of electrical shock, do not immerse key parts such as the main body, power cord, and power plug in water or other liquids. Do not place or store the appliance where it can fall or be pulled into a tub or sink.
- Do not attempt to repair, disassemble, or assemble the main body or the power cord of this product by yourself.
Warranty and Customer Support
This warranty does not cover the CO2 cylinders. Carbon8 is not responsible and liable for incidental or consequential damages. The only remedy for the consumer is to have the product repaired or replaced according to the terms and conditions of this warranty. Some local laws may not allow the exclusion or limitation determined repair charge.
FAQ
-
Q: Can I use the Carbon8 Infinity Stream on carpets and plastic surfaces?
A: No, the product should not be used on surfaces such as carpets and plastic.\ -
Q: Can I rinse the main body of the Carbon8 Infinity Stream with water?
A: No, it is not allowed to rinse the main body with water to prevent water from leaking into the electrical circuit and causing malfunctions. -
Q: What should I do if I have problems with my Carbon8 Infinity Stream?
A: If you have problems with your machine, please go through the following steps: -
Contact customer support for assistance.
-
If Carbon8 or its authorized agents determine that the malfunction or damage to your Sparkling Water Maker is not covered by the warranty, Carbon8 will repair the Sparkling Water Maker only upon payment of the determined repair charge.
CONGRATULATIONS ON BEING PART OF THE UNBOTTLED MOVEMENT
-
WE CREATED THE CARBON8 INFINITY STREAM WITH ONE MISSION IN MIND: A SUSTAINABLE INSTANT SPARKLING WATER DISPENSER THAT IS EASIER TO USE THAN ANY EXISTING SYSTEM.
-
Our patented Carbon8 Reactor mixes water and CO2 instantly, creating an infinite stream of sparkling water.
-
All you need to do is use the touch button on the top of the device and sparkling water is beautifully dispensed into any glass or bottle.
-
Get rid of wasteful PET bottles that need to be filled and attached to the carbonator.
-
The removable 2-liter water tank can be stored in your refrigerator or refilled with cold water and even ice.
-
A UV light is integrated into the water tank to eradicate bacteria, viruses, microcontaminants, and algae, to ensure ultra-clean sparkling water.
Note: Products that include gas under high pressure should always be handled with care. Please read carefully the safety guidelines and the manual of the product before using it. -
Keep this user guide for further reference. Make sure to include this guide when passing on the Carbon8 to third parties.
IMPORTANT SAFETY INSTRUCTIONS
- WARNING!
- When using electric appliances, basic precautions should always be followed, including the following:
- Read all the instructions before using the appliance.
- The Carbon8 is designed and intended to private use (at home and in the office) and is Household use only. The manufacturer only guarantees household issues.
- The manufacturer is not responsible for any consequences and faults caused by not following the instructions.
- The warranty does not cover: Commercial use.
- Negligent use or misuse of the product.
- Use with incorrect voltage or current.
- Use contrary to the operating instructions.
- Disassembly, repair, or modification by anyone other than the manufacturer.
- Damage caused by accidents or disasters, such as fire, flood, earthquake, war, vandalism, or theft.
- Normal wear and tear.
SPECIAL REMINDER
Before the first use, rinse the water tank with lukewarm water. Alternatively, you can use a soft cleaning sponge (or cloth) and a non-irritating detergent to clean the water tank.
- Caution for Ultraviolet radiation: The Sparkling Water Maker is using Ultraviolet light. Do not look at the UV light directly because this can irritate the eyes and skin.
- Do not use the product around flammable objects, and do not place it next to objects that can be easily deformed by heat. The product should not be used on surfaces such as carpets and plastic.
- Always place the product on a dry, stable, flat, and horizontal surfa-ce.
- Keep the product away from heat and in or close to areas where the surrounding temperature is relatively hot (e.g. stoves or other sour-ces of heat). Never use the device near an open fire (such as burning candles) or on hot surfaces.
- Never heat the product in a microwave oven.
- Do not touch the product with sharp or abrasive objects to avoid damaging the inner liner of the water tank and the surface of the product. Under no circumstances use aggressive cleaning agents, cleaning alcohol, or other chemical solutions since these can penetrate the housing or impair functionality.
- To reduce the risk of electrical shock, Do not immerse key parts such as the main body, power cord, and power plug in water or other liquids. It is not allowed to rinse the main body with water, to prevent the water from leaking into the electrical circuit and causing malfunctions. Do not place or store appliance where it can fall or be pulled into a tub or sink.
- Do not attempt to repair, disassemble or assemble the main body or the power cord of this product by yourself.
WARNING!
- 1. Do not carbonate anything other than water. Other liquids can contaminate and clog internal parts, potentially resulting in excessive pressure and serious injury. Do not leave the Product unattended. To reduce the risk of injury, clo-se supervision is necessary when an appliance is used near children. The Sparkling Water Maker is not a toy. Keep and store it out of the reach of small children. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any man-ner. Return appliance to the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment.
- This product must use a grounded mains socket with a rated voltage of 120V, 60Hz. The plug must be fully inserted into the mains socket to prevent the plug from being overheated and burnt out due to poor contact, resulting in a short circuit or a fire.
- The Sparkling Water Maker can be used by children and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device safely and they understand the resulting hazards.
- Children should always be supervised to ensure that they do not play with this appliance. Cleaning and maintaining this product should not be done by children without proper supervision.
- Do not transport the Sparkling Water Maker with the gas cylinder attached. Always unscrew the gas cylinder during transport. Protect the product against vibrations and shocks during transport.
- Only use attachments recommended or sold by the manufacturer.
- Do not use outdoors.
- To disconnect, turn all controls to the off (“O”) position, then remove plug from outlet.
- Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
- Unplug from outlet when not in use and before servicing or cleaning.
- To Reduce the Risk of Electric Shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a pola-rized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
CO2 CYLINDER
To reduce the risk of a CO2 leak, personal injury, and property damage:
- Never use a CO2 Cylinder if damaged. Inspect the CO2 Cylinder and CO2 Cylinder valve before use for dents, punctures, or other damage. If damaged, contact Carbon8.
- Do not manipulate the CO2 Cylinder in any way, including puncturing, incinerating, or removing the valve.
- Do not expose the CO2 Cylinder to heat above 120°F / 50°C, protect it from sunlight and store it in a well-ventilated area. Do not remove the CO2 Cylinder from the Sparkling Water Maker when it is being operated.
- Do not handle or remove a CO2 Cylinder while it is discharging CO2. In the event of a CO2 leak, ventilate the area, breathe fresh air and if feeling unwell seek immediate medical attention.
SAVE THESE INSTRUCTIONS
KEEPING YOUR SPARKLING WATER MAKER BEAUTIFUL AND CLEAN
- CARBON8
- This carbonator is made of brushed aluminum. To clean your carbonator we recommend using a micro fiber cloth and water. If needed you could use some mild soap. Do not use strong detergents or a cleanser with an abrasive substance.
- WATER TANK
- To clean the water tank use clean lukewarm water with a mild detergent. If using a dishwasher brush, make sure the brush is intended to be used for cleaning plastic bottles and do not leave any scratches. Do not use solvents, strong detergents, or cleansers with abrasive substances. Do not wash the water tank in a dishwasher.
- DRIP TRAY
- Remove the drip cover from the tray, dump excess water, and rinse and dry.
PRODUCT OVERVIEW
SETUP AND INSTALL THE CO2 CYLINDER
- Set the Carbon8 onto the rubber drip mat and Plug the power cord into a grounded mains socket with a rated voltage of 120V / 60Hz. Make sure the Touch Button light is on.
- Remove the magnetic Drip Tray and the CO2 cover.
- Remove the seal and the cover from the Carbon8 CO2 cylinder.
- Push the cylinder up and screw it clockwise while applying pressure until it is firmly held in place. Tilt it back into the body of the Sparkling Water Maker. Hand tighten only; DO NOT use tools.
- Re-attach the cover by fitting the tab at the top of the cover into the slot on top. Push gently the cover into place. Finally, put the Drip Tray back into place. When you need to replace the gas cylinder, remove the tray and cover. Grab the bottom of the cylinder with your index finger and thumb and tilt the cylinder out.
- Unscrew it counterclockwise and then carefully pull it out of the compartment.
Fill the Water tank
-
Before the first use, rinse the water tank with lukewarm water. Alternatively, you can use a soft cleaning sponge (or cloth) and a non-irritating detergent to clean the water tank.
-
Open the cover and fill the water tank with cold, clean water up to the marked filling line.
WARNING! Do not carbonate anything other than water. Other liquids can contaminate and clog the internal parts, potentially resulting in excessive pressure and serious injury. -
To remove the water tank for filling or refrigerated storing, push the tank back and up.
-
The Snap-Lock will release the tank, and you can lift it vertically up.
NOTE:
When re-inserted correctly, there is no gap between the bottom of the tank and
the base. Do not carbonate if the tank is not resting on the
base.
PRO TIP:
- Even though Carbon8 works with room temperature water, cold water carbonates better. Add some ice into the tank or keep the water tank in the fridge, so you have one ready to carbonate.
Start carbonating
-
Click and Sip. Now that your water tank is filled with cold water or even water with ice we are ready to create instant sparkling water.
-
Different from other carbonators, you don’t have to adjust the carbonation by giving it multiple pumps to reach a sophisticated medium-high carbonation level.
-
The disinfection function will automatically run and the ambient light will be shining into the glass throughout the carbonation process.
-
Press and hold the touch screen button on the top and after a 2-second delay, sparkling water will flow into your glass or bottle until the desired sparkling water amount is reached. Lift your finger to stop with a 1-second delay.
Note that the pump and carbon reactor will charge while carbonating, and you will hear a humming sound. This is normal. There is also a small splashy discharge in the end to purge the line. -
We recommend using taller glasses or to hold smaller glasses closer to the spout to avoid splashes. Some drizzles are normal as we are using an infinity stream that instantly creates bubbles into your glass.
GAS, UV DISINFECTION, AND WATER FILTER
- 100% RENEWABLE CO2 MADE IN THE USA
- Our CO2 comes from renewable sources within the agricultural industry in the United States. That’s because we extract our CO2 from a source that’s already being released into the atmosphere, rather than introducing new, unnecessary CO2 that would negatively impact the environment.
- Our CO2 is harvested from the atmosphere using biogas generators that recapture methane gas that would have been emitted into the atmosphere by decomposing organic materials.
- One step further, it is then purified and certified safe to become a food-grade gas for sparkling water machines.
- UV light is integrated into the water tank to eradicate bacteria, viruses, micro contaminants, and algae, for clean sparkling water.
UV STERILIZATION
- The UV disinfection function automatically runs while carbonating and dispensing the water and will stop as you lift your finger from the touch control
CAUTION:
Even though the UV light will automatically shut off after you remove your
finger, make sure to not look at the light directly. UV light can irritate the
eyes and skin.
WATER FILTRATION
- Carbon8 is the only Sparkling Water Maker and dispenser that also offers a filter technology that allows you to use tap water. Available in Spring 2023.
LIMITED WARRANTY
- We want you to be completely happy with your Carbon8 Sparkling Water Maker.
- Therefore, we’ve taken great care to ensure its quality and safety. But in the unlikely event that something goes wrong with your machine within 1 (one) year of purchase (or according to specific country laws), and we determine the problem is due to faulty workmanship or materials, Carbon8 will repair or replace the product free of charge within the limitations set out in this warranty.
- Carbon8 may replace your Sparkling Water Maker with a reconditioned Sparkling Water Maker, or an equivalent one if the model you purchased is no longer available. No refunds shall be given. This limited warranty is available to consumers who purchased the Sparkling Water Maker for personal, family, or household use.
This warranty does not apply if the product is damaged due to:
- Abuse, misuse, alteration of the Sparkling Water Maker, not following the guidelines mentioned in this user guide, or commercial use. Carbonating liquids other than water.
- Normal wear and tear.
- Modification, or repair made by anyone except by Carbon8.
- The use of CO2 Cylinders other than those approved by Carbon8 Damages were caused using a faulty gas cylinder. Accident, shipment, or anything other than normal household use.
THIS WARRANTY DOES NOT COVER THE CO2 CYLINDERS
- Carbon8 is not responsible and liable for incidental or consequential damages. The only remedy for the consumer is to have the product repaired or replaced according to the terms and conditions of this warranty. Some local laws may not allow the exclusion or limitation of these damages, so these exclusions do not apply to you.
SPARKLING WATER MAKER WARRANTY SERVICE
- If your Sparkling Water Maker needs warranty service, please contact Carbon8 Customer Service by visiting www.carbon8water.com.
- A representative will give you specific instructions on how to arrange for the shipment of your machine, at your expense, to one of our authorized service centers.
- Only Carbon8, or its agents, are authorized to provide warranty re-pairs or service to your Sparkling Water Maker.
NON-WARRANTY SERVICE
- If Carbon8 or its authorized agents determine that the malfunction or damage to your Sparkling Water Maker is not covered by the warranty, Carbon8 will repair the Sparkling Water Maker only upon payment of the deter-mined repair charge.
CO2 CYLINDERS
- Your Sparkling Water Maker has been designed to operate with a Carbon8 CO2 Cylinder. The use of another CO2 Cylinder is not recommended as they may not be compatible with a Carbon8 Sparkling Water Maker. Damages resulting from the use of a cylinder other than the Carbon8 CO2 Cylinder or the use of the Carbon8 CO2 Cylinder not following the instructions included in this user guide are not covered by the warranty.
CUSTOMER SUPPORT
- If you have problems with your machine, please go through the following steps:
- Check the troubleshooting guide on carbon8water.com and try the suggested solutions.
- Contact us at support@carbon8water.com. We will answer within 24 hours on week-days.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>