NEC PA1705UL-W-PA1705UL-B Projector User Guide

NEC PA1705UL-W-PA1705UL-B Projector

Important Information

• First read the Important Information. It covers information about projector safety and cautions.
• The user’s manual (*) is posted on the web site in PDF (Portable Document Format) and provides detailed product and usage information for your NEC projector.
• The user’s manual is available in 18 languages.

Instruction For Use

Step 1
Connect your computer to the projector.

Step 2
Connect the supplied power cord.

Use the power cord stopper.

Remove the lens cap.

Turn on the projector.

Select a source.

Adjust an image size and position.

[FOCUS]

[ZOOM]

Turn off the projector.

NOTE: This document explains the basic operations of the projector installed with the lens unit and the option cover attached.

CAUTION
Do not enter the hazard zone when using a lens unit in IEC/EN 62471-5:2015 risk group 3 (NP55ZL/NP56ZL). See Important Information for details.

Connect your computer to the projector using the HDMI cable. (Not supplied)
Connect the supplied power cord.
Make sure that the prongs are fully inserted into both the AC IN terminal and the wall outlet.
To prevent the power cord from accidently removing from the AC IN of the projector, use the power cord stopper.
Remove the lens cap.
Turn on the projector.

WARNING
The projector produces a strong light. When turning on the power, make sure no one within projection range is looking at the lens.

1. Press the (POWER) button on the projector cabinet or the POWER ON ( |  ) button on the remote control.

Select a source.

1. Press the INPUT button on the cabinet for at least 1 second or the HDMI1 button on the remote control.

Adjust an image size and position.

CAUTION
Perform the adjustment from behind or from the side of the projector. Adjusting from the front could expose your eyes to strong light which could injure them.

NOTE:
Adjustment procedures are differed on lens unit. Refer to the User’s manual about detailed adjustment for each lens unit.

[LENS SHIFT]

1. Press either SHIFT/HOME POSITION button on the cabinet or SHIFT button on the remote control.
2. Press the ▼▲◀▶ buttons to move the projected image.

[TILT FOOT]

1. Turn the left and right tilt foot to adjust.

[FOCUS]

1. Press the FOCUS button.
2. Press ◀ ▶ buttons to adjust focus.
   • The focus adjustment around the optical axis and in the peripheral area are required depending on the lens unit.

[ZOOM]

1. Press either ZOOM/L-CALIB. button on the cabinet or ZOOM button on the remote control.
2. Press ◀ ▶ buttons to adjust zoom.

Turn off the projector.

1. Press the (POWER) button on the projector cabinet or the STANDBY( ) button on the remote control.
2. Press either the (POWER) or the STANDBY( ) button again.
3. Mount the lens cap.
4. Disconnect all the cables.

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI
Trade Dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Customers Support

© Sharp NEC Display Solutions, Ltd. 2023
Ver. 1 6/23
Printed in China

|
---|---
https://www.sharp-nec-displays.com/dl/en/pj_manual/lineup.html

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>