Amapi BSD01 Apple Home Kit Smart Plug User Manual

: June 14, 2024
: Amapi

Table of Contents

Amapi BSD01 Apple Home Kit Smart Plug
Smart Plug
Product Description
Product Features
Connect Homekit
Connect Amazon Alexa or Google Assistant
Specification
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Amapi BSD01 Apple Home Kit Smart Plug

Smart Plug

Product Description

Amapi-BSD01-Apple-Home-Kit-Smart-Plug-fig-2

NOTE: Press and hold for 5 seconds to reset the plug to factory setting and put it in paring mode.

Product Features

Fast and Stable connection: supports bluetooth LE, WiFi(2.4G), and supports BLE mesh, the plug will find the best way to connect.
Voice Control: Free up your hands by using simple voice commands with HomeKit, Alexa and Google Assistant .
Schedule lights, fans, and appliances to turn on and off automatically, or control them remotely when you’re away.
Overload protection design, with a safe and durable fireproof casing.

Connect Homekit

Scan to connect via QR

Step 1: Open the iOS camera and scan the HomeKit setup QR code on the device. Step 2: When the setup prompt appears, tap “Continue” to add the device to your Home app.
If you’re unable to set up the device using the Home app, try the following:

Ensure that your iOS device is connected to a 2.4GHz WiFi network.
Forget all other WiFi networks on your iOS device and connect again.
Press and hold the switch for 5 seconds until the light flashes to reset the smart device, and then try again.

NOTE:
To control your HomeKit accessories while away from home, share control with others, and automate your accessories, you need to set up your HomePod, HomePod mini, Apple TV, or iPad as a home hub.

Please complete the HomeKit connection within 10 minutes. If the time limit is exceeded, you will need to reset the device.

Reset:

Press and hold the plug for 5 seconds until the light flashes.
The device will be restored to its factory settings.

Connect Amazon Alexa or Google Assistant

Step 1: Download and Install the “Aimore” App.

Search for “Aimore” in the Apple App Store or Google Play.
Alternatively, scan the QR code below to download and install the app.

NOTE: To add the plug to the Ai more app, make sure that your phone’s Bluetooth function is turned on. The free Aimore app is compatible with iOS 10.0 and above, and Android 5.0 and above.

Step 2: Connect to Alexa and Google Home

Open the “Me” interface in the Aimore app.
Select “Third-Party Voice Services” to access the detailed instructions.

Note: Scan the corresponding QR code to get the connection tutorial.
*If you don’t want to use HomeKit, Alexa, or Google, you can use the “Aimore” app to control this device. Just download the app by scanning the QR code on the previous page.