bcp SKY6573 Elevated Mobile Pocket Herb Garden Bed Lockable Wheels Storage Shelf Instruction Manual
- June 14, 2024
- bcp
Table of Contents
INSTRUCTION MANUAL
Mobile Pocket Herb Garden Bed
SKY6573
Ver. 1
NOTICE Please retain these instructions for future reference.
- Do not stand on or use any part of this item as a step ladder.
- Firmly secure all bolts, screws, and knobs before use.
- Reconfirm that all bolts, screws, and knobs are secure every 90 days.
- Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is completely assembled.
- Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
- Be aware that some parts are heavy and have sharp edges.
- If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made and/or factory replacement parts are installed.
- Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the product warranty.
- This item is made of wood and may expand due to moisture.
TOOLS REQUIRED
PHILLIPS SCREWDRIVER POWER DRILL (OPTIONAL)
470 LBS BED CAPACITY 110 LBS SHELF CAPACITY
1 PERSON ASSEMBLY UP TO 45 MIN. ASSEMBLY
HARDWARE
1 3.5 x 55mm SCREW 2 3 x 14mm SCREW
30 PCS 6 PCS
3 BRACKET 4 CASTER
2 PCS 2 PCS
5 LOCKING CASTER
2 PCS
PARTS
| A LEG I | B LEG II | C SHORT PANEL | D LONG PANEL I |
|---|
2 PCS
|
2 PCS
|
2 PCS
|
1 PC
E LONG PANEL II| F SUPPORT BAR| G BOTTOM PANEL I| H BOTTOM PANEL II
1 PC
|
1 PC
|
2 PCS
|
2 PCS
I VERTICAL PANELS| J HORIZONTAL PANELS| K BOTTOM SHELF| L CROSS BAR
3 PCS
|
4 PCS
|
1 PC
|
4 PCS
M PLANT MARKERS| N LINERS
8 PCS
|
8 PCS
PRODUCT ASSEMBLY
[1] Attach one part E long panel to one part A leg and one part B leg with four part 1 screws , two screws per leg.
Connect one part C short panel to each end of the part E long panel with four part 1 screws , two screws per leg.
Attach one part A leg to one part C short panel with two part 1 screws.
Before securing the legs, make sure the caster hole is facing upward.
[2]
Attach one part F support bar to the two part C short panels with two part 1 screws.
[3] Attach the remaining part B leg to one part C short panel with two part 1 screws.
Attach one part D long panel to the two part C short panels with four part 1 screws, two screws per leg.
[4] Attach two part 4 casters into the legs on one long panel, and two part 5 locking casters on the other long panel.
Attach four part L cross bars to each leg and part E long panel with eight part 1 screws, two screws per bar.
[5] Insert two part G panels and two part H panels into the bed assembly.
NOTE: Arrange the panels as follows: G, H, H, G
There will be a slight gap between the two H panels, this is normal and will reduce warping from moisture.
[6] Attach the part K bottom shelf with four part 1 screws.
[7] Insert four part J horizontal panels and three part I vertical panels.
Attach one part 3 bracket to a part H panel with three part B screws, repeat on the opposite side to secure.
[8] Insert the p art N liners, one liner per pocket.
HELP CENTER
Question about your product? We’re here to help. Visit us at:
—— help.bestchoiceproducts.com ——
Chat Support Product Inquiry Orders FAQ
Product Assembly Returns & Refunds
PRODUCT WARRANTY INFORMATION
All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long as the item is returned in its original product packaging and all accessories from its original shipment are included. All returned items will receive a full refund back to the original payment method. All returned items will not be charged a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best Choice Products Customer Service Representative when the return request is submitted. Items received without an RA may not be accepted or may increase your return processing time. Once an item has been received by Best Choice Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If the reason for return is a result of an error by Best Choice Products then Best Choice Products will provide a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products, and is the customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items returned are not considered undamaged until they are received by Best Choice Products and verified as such. All damages to items are the customer’s responsibility until the item has been received by and acknowledge by Best Choice Products as undamaged.
WARNING
Manufacturer and seller expressly disclaim any and all liability for
personal injury, property damage or loss, whether direct, indirect, or
incidental, resulting from the incorrect attachment, improper use, inadequate
maintenance, unapproved modification, or neglect of this product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>