NGS DIABLO GT-Challenge 3-In-1 Racing Wheel User Manual

NGS DIABLO GT-Challenge 3-In-1 Racing Wheel

Introduction

Thank you for purchasing a 3IN1 wired wheel designed for PS3, PS2, and PC consoles, which is compatible with all of the PS/PS1/2/3 and PC games. The shape is designed according to the racing wheels and in accordance with human ergonomics, you won’t feel tired even if you operate it for hours. It makes the game even more realistic, more maneuverable, and more interesting.

Features and Specification

1. Four LEDs to indicate the selected channel.
2. MODE button for setting on PS3 console.
3. Four analog input D-pad: UP/DOWN/LEFT/RIGHT.
4. Four digital input buttons: X, O, □, ∆.
5. Eight digital input function buttons: START, SELECT, L3, R3, R1, R2, L1, L2.
6. 3 function modes for PS2: DIGITAL /ANALOG /NEG.
7. Eight programable buttons: R-wing, L-wing, brake pedal, accelerating pedal, L3, R3, gear stick (R2 and L2).
8. Seven big and durable cupules make it fixed and easily operated.
9. 180-degree steering angle.
10. Accelerating and breaking pedals with springs which give you a realistic feeling.
11. With vibration feature.
12. Adjustable steering sensitivity.
13. Button relocation feature.

Buttons Layout

PS3 Connection

NOTE: Please ensure that your console is turned OFF before connecting or disconnecting the Steering Wheel.

1. Connect the wheel to the PS3 console.
2. Power on the PS3 console. All the LEDs begin to flash.
3. Press the MODE button to connect the Steering Wheel.
4. Press and hold the MODE button for 2 seconds to enter the PS3 home window.
5. The LED number indication on the steering wheel will represent the player number the steering wheel is assigned to:
   • LED1 – 4 = Player 1-4
   • LED1 + 4 = Player 5
   • LED2 + 4 = Player 6
   • LED3 + 4 = Player 7

Please note: Once the steering wheel is disconnected from the USB port of the PS3 or the PS3 console is restarted or switched off you will need to re- connect the steering wheel.

PC

System Requirement

1. USB port.
2. XP & Vista.
3. DirectX version 7.0 and later. To connect the wheel, plug the wheel’s USB connector into a spare USB port on your computer, (Note: To use a USB controller, you must be running windows 98/98SE/ME/2000/ XP/ Vista operating systems).

Installation

1. Enter into Windows.
2. Insert the supplied Driver CD into your PC CD ROM.
3. Double-click the SETUP icon.
4. Install the driver ‘LS-USBmX1/2/3’ following system prompts.
5. Connect the Steering Wheel to a USB Port on the PC.
6. Select ‘Game Controllers’ in the Control Panel to calibrate the steering wheel properties.

Calibrate the wheel as described in the calibration section of the game controller window. The USB driver will only have to be installed once, after this has been done whenever you connect the wheel to your USB port the “LS- USBmX1/2/3” will appear within the “Gaming Options” window. To ensure the wheel works correctly please re-calibrate the wheel before use.

When you have finished testing, quit by clicking on OK in the Test window, and OK in the General window. Finally, close the Control Panel window. Now its time to load your favorite game and start playing! Note the actual controls for the fire buttons, throttle, and brake pedals are set within each individual game. Check your game documentation for further details.

PS2

NOTE: Please ensure that your console is turned OFF before connecting or disconnecting the wheel.

1. Connect the accelerator/brake pedal unit to the socket at the rear of the Wheel.
2. Plug the correct console plug into port 1 of your console.
3. Place the accelerator/brake pedal unit in a convenient location under a table or in front of a chair within easy reach.
4. Turn “ON” your game console and load your driving game software. You are now ready to play.

Sensitivity Adjustment

1. The wheel has three settings of steering sensitivity to suit your driving games – High, Middle and low.
2. To change between these three levels of sensitivity.
3. Press and Hold the Select and Start buttons for 3 seconds, and a green LED will switch ON.
4. Press the Select button to enter the sensitivity adjustment.
5. Press the Select button again to select between the following: Middle (Green-LED illuminates) -> Highest (Green-LED flashing quickly) -> Lowest (Green-LED flashing slowly).
6. Press the UP button on the D-pad to exit.

Button Relocation

The Steering Wheel incorporates a very useful feature called Button Re- location to re-map any control button to the most convenient and useful button configuration for the user.

1. Press and hold the program button (or start and select) for 3 seconds till the green LED illuminates.
2. Press the button that you wish to relocate the function to, the LED starts to flash.
3. Press the button with the function you wish to be relocated, the LED turns OFF, the relocation is complete.
4. Repeat the above steps to relocate further control buttons.
   ( NOTE: Please ensure that Button Relocations are deleted before changing to a different driving game, otherwise the controls may not match the new game being played).

To Clear a Button Relocation (Remap)

1. Press and hold the program button (or start and select) for 3 seconds till the green LED illuminates.
2. Press the desired button to delete the Button Relocation, the LED starts to flash.
3. Re-press the button, the LED is OFF, deletion is complete.
4. Repeat the above steps to clear any other Button Relocations.

TROUBLESHOOTING

• The Steering Wheel is not located in the neutral center:
  Do not turn the Wheel when you are switching on your PlayStation. If the Wheel is not at its neutral (center) position when the console is turned on, then the position that it is held at will be read as the new neutral (center) position and this may cause the unit to operate incorrectly. To reset to the neutral position, switch off the console, leave the Wheel centralized, and then turn on the console again.

• The Steering Wheel does not function properly:
  Please check to ensure that the button/pedal not working has not been re- located – Please follow the instructions in the Relocation section. Please follow the instructions to clear a button remap.

On PlayStation

Check the Steering Wheel mode switch, the “Analog Button”. If the game does not support the mode that you have set, then the Steering Wheel may not operate correctly. Try to select another mode to suit the game & reset your console.

• The Pedals do not seem to work:
  Please check to ensure that the button/pedal not working has not been relocated – Please follow the instructions in the Relocation section. Please follow the instructions to clear a button remap. Please make sure the game you are playing is set up so that the acceleration and brake are using the following functions. (PlayStation – Acceleration “X” button, brake “□“ button). Please refer to the software manual on how to change the acceleration and brake settings.

• The gearshift does not work:
  Please check to ensure that the gearshift function has not been relocated Please follow the instructions in the Relocation section. Please follow the instructions to clear a button remap. Please make sure that the game is set to Manual Gear Selection (MT) mode. If the game is in Automatic Gear Selection mode (AT), then the game will change gear for you automatically, making the Steering Wheel gearshift redundant.

FAQs

Is the NGS DIABLO GT-Challenge compatible with gaming consoles?

Yes, it's compatible with various gaming consoles, including PlayStation, Xbox, and PC.

What type of racing games can I play with this wheel?

You can enjoy a wide range of racing games, including simulators, arcade racers, and more.

Does the NGS DIABLO GT-Challenge wheel include pedals?

Yes, it comes with a set of pedals for a more immersive racing experience.

Is the wheel adjustable for different player heights?

Yes, you can usually adjust the angle and height of the wheel to suit your preferences.

What is the force feedback capability of this racing wheel?

The NGS DIABLO GT-Challenge typically offers force feedback, providing realistic resistance and feedback during gameplay.

Is the wheel easy to set up and install?

Yes, it's designed to be easy to set up and usually comes with clear instructions for installation.

Can I use this racing wheel with racing simulations?

Absolutely, the wheel is suitable for use with racing simulators and provides a more immersive experience.

What is the compatibility with different gaming platforms?

The NGS DIABLO GT-Challenge wheel is often compatible with PlayStation, Xbox, and PC platforms.

Are there any additional accessories included with the wheel?

In addition to the wheel and pedals, it may come with additional accessories such as a stand or mounting hardware.

Is the wheel designed for beginners or experienced gamers?

It's suitable for both beginners and experienced gamers, with adjustable settings to cater to different skill levels.

What is the build quality of the NGS DIABLO GT-Challenge wheel?

The wheel is typically built with sturdy materials to withstand the rigors of intense racing gameplay.

Is the racing wheel compatible with a gear shifter attachment?

Many users can attach a gear shifter accessory to enhance their racing experience, but check for compatibility with your specific model.

What is the warranty for the NGS DIABLO GT-Challenge wheel?

The NGS DIABLO GT-Challenge Wheel typically comes with a warranty of 1 year from the date of purchase.

Download This PDF Link:NGS DIABLO GT-Challenge 3-In-1 Racing Wheel User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>