LYNKBEY M20 Pro Robot Vacuum and Mop Combo User Guide

Embracing Technology for Warmer Life
Please contact us if you encounter any problems anytime
  support@lynkbey.com
  wwwilynkbey.com

Please read over the quick start guide on the back before using the product
Quick Start Guide

Product Introductions

1. Quick Start Guide’

2. Owner’ s Manual

3. HEPA2
   (installed in factory 1, replacement “1, one is already installed inside the robot and the other one is placed in the protective form) .

4. Mopping cloth2 pairs
   (installed in factory 1, replacement “1, one is already installed inside the robot and the other one is placed in the protective form)

5. Disposable dust bag
   (installed in factory *1, replacement “1, one is already installed inside the dock and the other one is placed in the protective form)

6. Edge sweeping brush
   (installed in factory *1, replacement “1, one is already installed inside the robot and the other one is placed in the protective form)

7. Cleaning brush

8. Power cord

9. Robot

10. Dock

Installation

1. Plug the power cord in place as shown in the figure, and wrap excessive cord back to the cord holder. Tips: The power cord can be led out from both  the left and the right side of the cord holder.
2. Place the dock on a hard and level ground (such as floor or tile) against a wall, and connect the power supply.
3. Open the clean water tank, add LYNKBEY original cleaning solution (Optional, Sold separately), and then fill with tap water to the MAX level mark
4. Open the top cover of the robot, remove the anti-collision foam, and turn on the power switch, wait until the Start/Stop button indicator keeps on steadily. Then load the robot onto the dock for charging.

CAUTION

Tips:

• Do not use this device to pick up hard or sharp objects on the floor directly, so as to avoid damage.
• Do not use this device to pick up spills or viscous liquid on the floor directly, so as to prevent the device from immersed in liquid.
• Do not wipe the robot and the dock with a wet cloth or rinse the same with any liquid..
• It is recommended that the floor should be vacuumed twice before mopping in the first-time use.

Connecting to Mobile APP

1. Scan the QR code under the top cover of the robot, or search for“ LINKBEY” in an APP store, or scan the following QR code to download and install LINKBEY App.

https://lynkbey2.com:7811/views/download/appDownload.html

Tips:
Connect your mobile phone to 2.4GHz WiFi in your home before network configuration.
APPs of different versions may have different network configuration interfaces.

2. Open the LINKBEY App, click “hot spot connection” icon.

3. Add your robot according to the guide on the App.

References

• LYNKBEY | Intelligent robot vacuum cleaners. – LynkBey

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>