HARDOOL SPL-33WRGB-HEX-1 Solar Waterproof Pillar Lamp User Manual
- June 14, 2024
- HARDOOL
Table of Contents
HARDOOL SPL-33WRGB-HEX-1 Solar Waterproof Pillar Lamp
Package Content
Please check whether all parts are inside
Remote instruction
Test before installation
- Before installing the light, please do the following test first.
- If it’s not normal, please don’t install it. Please check first.
- Turn on the lamp with the remote.
- Face panel towards the sunlight, the lamp won’t glow but will charge sunlight and there will be a red signal inside the lamp.
- Cover the solar panel, and the lamp glows, then the light control function works normally.
- Use a remote and press a different button to see whether all function works normally.
Attention: Please don’t forget to take the PVC sheet out of the remote bottom when you use the remote first time.)
Installation method:
- Find the installation position.
- The lamp Solar panel needs to be installed outside to face enough sunlight.
Notice:
- Let solar panels face the direction of strong sunlight.
- Solar panels should not be blocked by buildings or trees.
- The solar panels should not be under glass or indoors.
- Do not install under Street/Utility lights.
Fix the lamp on a pillar or flat with the screws firmly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>