Feob HX45X2 Power Bank USB C 5000mAh Instructions

: June 14, 2024
: Feob

Table of Contents

Use actions
Power switch button
Charge the HX45X2
Charge your phone or device
Simultaneous charge and discharge function
Security Considerations
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Feob HX45X2 Power Bank USB C 5000mAh Instructions

In order to ensure that you can fully understand and install and use this product, please be sure to read the instruction manual carefully. After reading, please keep it for future reference.

Use actions

Power switch button

Tap the switch button to activate the discharge function, during the discharge process, continuously tap this switch twice, you can end the current discharge state, and then tap this switch, you can discharge the work again.

Charge the HX45X2

Charge this product through an adapter (5V 1A or more)（During charging, the LED display shows the current charge）.
$Charge this product through an adapter $5V 1A or more$（During charging, the LED display shows the current charge）.$

Charge your phone or device

During operation, the LED display shows the current power.

Simultaneous charge and discharge function

Security Considerations

When the phone or device is placed flat on the countertop for charging, it should not be squeezed to avoid
damaging the phone or device.
For first use, please fully charge this product first.
Use original or certified wire.
Do not come into contact with liquids.
Do not disassemble.
Avoid falling products.
Avoid use at temperatures that are too low or too high.
In the process of charging digital products, if the LED indicators of this product are all off, it means that the power of this product is insufficient, please charge as soon as possible.
When the digital product is fully charged, please unplug the cable in time to avoid loss.
During the charging process of the product, the personnel should not leave for a long time.

Warning

Since this product contains Li-ion electric core, it’s forbidden to dismantle the product shell arbitrarily to avoid possible damage to electric core or other dangers.

It’s forbidden to arbitrarily dismantle, squeeze, puncture this product or put it in short circuit, water, fire or exposed to an environment with a temperature higher than 60℃ (140℉).