ECOFLOW 092 Solar Tracker User Manual
- June 14, 2024
- ECOFLOW
Table of Contents
ECOFLOW 092 Solar Tracker
Assembly Instructions
What’s in the box
CONTROL MODULE
LIGHT SENSOR
MOTORIZED LEVER ARM
L-FEMALE
L-MALE
B-LEFT B-RIGHT
A1-MIDDLE
A1-LEFT A1-RIGHT
A2
A3-LEFT A3-RIGHT
A4
A5
SOLAR CHARGING CABLE FOR SOLAR PANEL (0.92ft)
SOLAR CHARGING CABLE FOR ECOFLOW UNITS (9.84ft)
Installation
Solar Tracker Installation
L-FEMALE
L-MALE
Using foldable solar panels
*If you plan to use foldable solar panels, please continue with step 5 to 7 to finish installation.
Attach the foldable solar panel.
NOTE
Long press the power button. The indicator light will turn on. The solar
tracker will begin rotating according to the lighting conditions.
Using rigid solar panels
*If you plan to use the rigid solar panels, please continue with step 8 to 11 to detach the folding bars and finish installation.
NOTE
Long press the power button; The indicator light will turn on. The solar
tracker will begin rotating according to the lighting conditions.
Disassembly
NOTE
Please fold A3-LEFT and A3-RIGHT first, and then fold A1-LEFT and A1-RIGHT
Detach the control module from the base stand. Fold the legs of the base.
Transportation
Using The Solar Tracker
Positioning the Solar Tracker
The Solar Tracker can rotate 345° therefore it has a 15° blind spot. That means if you’re in the northern hemisphere, you should position the front of the solar tracker to the east with a slight northern tilt. If you’re in the southern hemisphere, you should position the front of the solar tracker to the east with a slight southern tilt.
NOTE
Please place the compass flat when positioning the Solar Tracker or use the
compass on your phone to guide the direction.
Northern hemisphere
Southern hemisphere
Turning on and off
Turn on the tracker by pressing the power button for 3 seconds. A long beep
indicates that it is powered on.
Turn off the tracker by pressing the power button for 3 seconds. A long beep
indicates that it is powered off. The stand will rotate back to its starting
position, and then shut down automatically.
NOTE
Please note that the Solar Tracker won’t be powered off if the solar panel is
still connected and getting solar power.
Emergency stop button
The emergency stop button is the red button located on the top of the control module. Pressing it will stop the motor immediately and you will hear the beep sound.
Operation Modes
Mode changes
Sound indicator
| Power on: | Beeps (increasing speed) for 10 seconds |
|---|---|
| Return to starting position: | Beeps once per second |
| Sleeping mode: | Quiet |
| Searching for light: | Beeps once per second |
| Standby: | Quiet |
| Low light: | Quiet |
| Strong light: | Quiet |
| Manual: | Beeps once per second |
| Shut down: | Long beep, then beeps once per second |
| Emergency stop: | Beeps five times per second |
Specifications
| Weight | 25KG |
|---|---|
| Load capacity | 25KG |
| Pitch axis range | 0–85° |
| Yaw axis range | 0–345° |
| Size | 2.5 × 1.5 × 1.5m (Minimum 2.5 × 1.1 ×1.1m) |
| APP | Supported |
| Built-in battery capacity | 5000mAh |
| Waterproof | IP54 |
| Wind resistance | 6 Strong Breeze |
Built-in battery
| Battery chemistry | NCM |
|---|---|
| Shelf life | 1 year(after full charge) |
| Lifespan | 500 cycles to 80% capacity |
| Operating temperature | -10°C~40°C (optimal: 25°C) |
*The built-in battery can be recharged from solar power. If the Solar Tracker is not in use for a long time, you can recharge the unit from the USB-C port (5 to 20V, 1A) port at the back of the Control Module
Precautions
- Do not let the tracker become submerged. It is recommended that the tracker be stored when the wind force exceeds 6.
- Do not leave the tracker outside for wind forces over 8.
- Do not let children under 12 operate the tracker alone, and inform them about the emergency stop button.
- Do not place heavy objects other than solar panels on the tracker.
- Do not carry the tracker while it is in use.
Light Indicators
Power Status Indicator
Power on: Fast flashing (flash for 0.1s every 0.2s)
Working: Slow flashing (flash for 0.5s every 1s)
Sleep: Always on
NOTE
Please note that the Solar Tracker won’t be powered off if the solar panel is
still connected and getting solar power. The light indicator will keep short
flashing (flash for 1s every 0.1s).
Battery Level Indicator
| Battery level | LED1 | LED2 | LED3 |
|---|---|---|---|
| 0 |
0~25%| | |
25~40%| |
|
40~55%| | |
55~70%| | |
70~85%| | |
＞85%| | |
NOTE
Light indicator status: Off Flashing On
Maintenance
If the Solar Tracker has not been used for a long time, please recharge the battery to 30-50% every 3 months. You can check the battery level from the battery level indicator or on the App.
DISCLAIMER
Read all safety tips, warning messages, terms of use, and disclaimers carefully. Refer to the terms of use and disclaimer at https://ecoflow.com/pages/terms-of-use and stickers on the product before use. Users take full responsibility for all usage and operations. Familiarize yourself with the related regulations in your area. You are solely responsible for being aware of all relevant regulations and using EcoFlow products in a way that is compliant.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>