VTOMAN Epower-325 X5 Jump Starter with Air Compressor User Manual

VTOMAN Epower-325 X5 Jump Starter with Air Compressor

WELCOME

Thank you for choosing the Vtoman jump starter. To ensure a good user experience, personal safety, and property security please read all of the instructions carefully before using this product, please keep this manual for reference.

Charge it first!

While reading through the manual, you can start to charge your X5 with the type-c cable provided.

Warning!

This unit is for vehicles (equipment) with 12V batteries. It may be dangerous if it is used with other types of batteries. Read and understand the safety information before using the jump starter. Failure to follow the safety information may cause damage to the jump starter, and may also result in electric shock, explosions, fire, property damage, and personal injury.

COMPONENTS AND FUNCTIONS

1. Pressure adjustment

2. Power switch / Inflating pump starting button

3. Settings

4. Lamp switch

5. LED display screen

6. Air inflating port

7. LED flashlight
   (distress signal light)

8. 5V/9V/12V output port

9. USB-C 9V/2A input port

10. 15V 10A output port

11. 12V Automobile starting port

KEY POINTS

Start Completely Dead Batteries: X5 3500A portable lithium battery jump starter pack can instantly start your 12V vehicles (9L gas or 8L diesel engine) – up to 50 jumps on a single charge, can be used for vans, RVs, motorcycles, dozers, tractors lawnmowers etc, especially professional for heavy-duty vehicles like SUVs, trucks boats. even in extreme weather from -4℉~140℉. Additionally, our X5 battery jump starter is equipped with BOOST FUNCTION for TOTALLY DEAD BATTERY.

All-In-One Car Battery Charger Jump Starter: The X5 jump starter is equipped with an air compressor that can inflate a typical car tire to 20 PSI in just 2 minutes, making it the perfect and essenciel for emergency situations on the road. ALSO, we have a real-time tire pressure detection function, and will auto shut off when reaching set psi, helps you keep your tires at optimal pressure for better fuel efficiency and longer tire life. It includes an extension air hose and 3 different nozzles to inflate cars, bikes, balls, and other inflatables.

Large 5.1-Inch Smart Screen: Compared with traditional jump starters that only have analog indicators, the X5 jump starter for car battery features a 5.1-inch smart screen that displays important information such as battery level, inflator mode and tire pressure in 3 units (PSI, BAR, KPA), making it more easier and clearer for you to use.

Enhanced Safety Technology: VTOMAN’s car battery jump starter pack prioritizes safety and ease of use. The jump cable indicator uses a reverse red light to notify you of incorrect usage, eliminating any concerns about incorrect connections or sparks. It offers a comprehensive range of protection features, including over-charge, over-current, short-circuit, reverse- polarity, low-temp, high-temp, over-voltage, over-load, spark-proof, and reverse-charge protection.

Upgraded Thermal Design: The X5 jump starter incorporates an upgraded thermal design that ensures cool operation even during prolonged use. This prevents overheating and guarantees long-lasting performance and durability.
More Than A Jump Starter: Upgraded from traditional heavy battery jump box; it is a multifunctional Portable device that also serves as a power bank battery pack, tire inflator, and LED flashlight. It even supports 18W Type-C fast charging, enabling quick and effortless device charging. Additionally, the X5 battery starter comes equipped with a 400-lumen LED light that offers four lighting modes: constant lighting (white), constant lighting (red), flash, and SOS.

Meaningful Gift Set: This jump starter kit includes 1 X jump starter with air compressor, 1 X smart jumper cable, 1 X USB-A to USB-C cable, 1 X carrying bag, 1 X pump tube, 3 X air nozzle, 1 X user manual and 18 months warranty and lifetime tech support. It makes for a perfect gift for car owners, camping enthusiasts, and adventure lovers. Rest assured, our customer service team is always available to assist you with any issues you may encounter.

BUTTONS AND DISPLAY SCREEN

1. Long press the switch button for 2 seconds so that the starter displays information on the electrical configuration (1), preset tire pressure value (2), static air pressure value (3), BAR, PSI & KPA (4), or icons of cars, SUVs, basketballs, bicycles or other inflatable items (5), The electric quantity will be displayed on the bar (see the illustration on the right), and the charger will enter the to-be-inflated mode.
2. Short press the lighting button to turn on the LED light, and the white light will remain on. Press the switch button again, and the LED will enter the red flashing mode. Press again to turn off the light.
3. After the load is removed, the product automatically enters the dormant mode 30 seconds later.
4. When the product is in standby mode or working normally, press the “Set” key to enter the inflating pump editing mode, after which the SUV icon will display; at the same time, preset the tire pressure value (unit: BAR), where you can short press the “+” “-” key to adjust the pressure value, or long press the “Set” key to alter the unit (KPA, BAR or PSI); short press the “Set” key to switch the item to be inflated until the car icon displays, and preset the pressure value (unit: BAR), before short pressing the “+” “-” key to adjust the pressure value or long pressing the “Set” key to switch the unit (KPA, BAR or PSI). Then short press the “Set” button until the bicycle icon and the preset air pressure value (unit: PSI) are displayed; press the “Set” button again to adjust the air pressure value, and long press the “Set” button to switch the unit (KPA, BAR or PSI). Press the “Set” button again to display the basketball icon and the preset air pressure value (unit: PSI); short press the “+” and “-” button again to adjust the air pressure value. Long press the “Set” key to switch units between KPA, BAR and PSI under the free mode.
5. While choosing the mode for the inflating pump for SUVs, cars, bicycles or basketballs, icon 4 will display the preset tire pressure value. Note that the preset value serves as reference only, and please adjust in accordance with the actual situation. The preset values for different inflatable items are:
   • SUVs: 2.5 BAR
   • Cars: 2.4 BAR
   • Bicycles: 45 PSI
   • Basketballs: 8PSI
   • Please switch the unit accordingly on the left. Only one unit can be displayed for each item.
6. While charging, the bars at the battery icon will flash in accordance with the actual level of remaining battery life.
7. When a product’s remaining battery life falls below 10%, the corresponding indicator will flash.

OPERATION GUIDANCE ****

Starting a 12V car

1. Insert the blue end of the battery clip into the hose machine while making sure that the indicator on the clip is off.
2. Connect the clip correctly respectively to the positive and negative ends of the car battery, where the red clip connects to the positive pole of the battery (+) and the black one connects to the negative pole (-).
3. Then operate following the instructions below in accordance with the state of the indicator：

• Greenlight long on  indicating that the connection is correct and the jump starter is ready to work.
• Red light long on indicating po that the positive/negative poles have been connected wrongly. Reconnect, and don’t start again until the green light is long on.
• Green light flashes: indicating that the pressure of the car battery is too low. Press the BOOST button and finish starting within 30 seconds after the green light is on.
• No red or green light: indicating that the battery may have been damaged. Make sure that the two poles are connected correctly, and press BOOST; when the green light is long on,f finish starting within 30 seconds.

Charging electronic devices such as smartphones or tablets

1. Choose a proper charging plug to connect to the port of the mobile phone adapter cable
2. Connect the USB plug of the mobile phone adapter cable to the USB output port of the host machine
3. Connect the charging port to your phone/tablet
4. Press the switch button to start charging your electronic devices

Powering 12 V electronic/on-board devices

1. Insert the adaptor end of the adaptor cable to the 15V output port of the host machine
2. Connect the 12V device to be charged to the other end of the adaptor cable
3. Tap the switch button to start charging the onboard products

Switch LED light modes

TECHNICAL SPECIFICATIONS

Technical specifications:

Size: 22312363mm
Weight: 1352 ±5g
Capacity: 59.2Wh
Out p ut: Fast charging (5V 3A,9V 2A,12V 1.5A);

15V 10A, 12V car starting

Input: 9V 2A
Time taken to charge to the full: Around 4 hours
Starting current: 600A (3S)
Peak current: 3500A
Temperature: -4~140°F

FAQS

1. Q: How to turn off the jump starter?
   A: (a) The product has an automatic detection function. Once it has no loading or the charging process is finished, the starter will automatically go dormant to save electricity. (b) Press the switch button for 2 seconds to turn it off.

2. Q: How long does it take to charge the host machine?
   A: It takes 4 hours to charge it to the full with a USB 9V/2A charger.

3. Q: How many times can the host machine start a car?
   A: For over 50 times in a row.

4. Q: How long is the host machine’s service life?
   A: 5-7 years under normal circumstances.

5. Q: How long can the host machine be shelved after charged to the full for it to work again immediately？
   A: The host machine boasts a scientific design that it can be shelved for 6-12 months. But it is suggested to charge it every three months to protect its service life.

TROUBLESHOOTING

Please stop using the product and contact the seller if the instructions below cannot solve the problems you have encountered.

Phenomenon

Tap the switch button and EPOWER does not react.

Reason

The EPOWER’s voltage is excessively low and the low voltage protection function is triggered to cut the circuits.

Instruction

Insert the charging plug into the 5V input port to activate it.

Product ingredients

chromium

VI (Cr VI)

| Pol （PBB） ed

bi brominated B)

phenyls (PB

| Po（PBDE） ed

di lybrominat rs

phenyl ether (PBDE)

Jump

starter

| O| O| O| O| O| O

REMINDERS

1. Please carefully read through the user manual before using this product.
2. This product can only be used to start 12V cars. It can cause danger if used on other cars. It is prohibited on airplanes or ships.
3. Please use it with care.
4. Please stop using the product if the battery clips or cables are damaged.
5. It cannot be used as a replacement of car batteries.
6. It cannot be used as a portable battery charger.
7. Do not continue to clip the product to the battery after the car has been successfully started.
8. Please use the battery clip attached with the product.
9. Make sure the blue plug of the battery clip is fully inserted into the product starter port; otherwise, the blue plug may melt. Before starting, make sure all battery connectors are clean and the battery clips are properly connected. If the battery end of the car is dirty or corroded, the product’s starting performance will be reduced.
10. Please do not start the product for more than three consecutive times, as this may cause it to overheat and damage the product. If you need to start the product multiple times, please make sure to wait for two minutes between each start-up.
11. Please remove the product from the car battery within 30 seconds after starting, otherwise, it may cause damage.
12. Please connect the positive/negative polar of the clip correctly.
13. Please make sure that 3-4 indicators are on before starting.
14. Please keep the product away from children.
15. Please do not use the product as a toy.
16. Keep the product dry.
17. Do not put the product in water.
18. Please do not use the product in explosive environments such as when there are flammable liquids, dust or gas.
19. Please do not modify or disassemble the product. It can only be repaired by professional technicians.
20. Do not expose the product to extremely hot conditions or fire.
21. Make sure that you can be heard or helped while you use the product.
22. Take off all metal items you wear such as such as rings, bracelets, and necklaces before using the product.
23. Please do not drop the product. In case it is damaged, please have eligible technicians to detect and fix it.
24. Do not expose the product to heat of over 158°F.
25. Charge at room temperature (32-140°F).
26. Please charge with the charger attached.
27. Do not start the car while the host machine is charged.
28. In case of liquid leakage from the host machine, restore the leaked liquid immediately with proper containers.
29. Under extreme conditions, battery leakage can occur. If the liquid is coming out of the product, it cannot be handled directly by hand. In case of skin contact, wash immediately with soap and water. If fluid comes into contact with eyes, h the eyes with cold running water for at least 10 minutes and seek medical attention immediately.
30. Products based on lithium batteries shall be disposed of at the end of their service life in accordance with local regulations.

MAINTENANCE AND SUPPORT

Attention

• Do Not Submerge In Water
• Do Not Disassemble
• Do Not Drop
• Avoid Extreme Temperatures
• Do Not Place Near or Into Fire

Customer Service

• 18 Months Limited Warranty Service
• Lifetime Technical Service
• Feel Free to Contact Us at Support@vtoman.com.
• For FAQ and More Information Support@vtoman.com.

Thank You for Choosing Us!

Documents / Resources

| VTOMAN Epower-325 X5 Jump Starter with Air Compressor [pdf] User Manual
Epower-325 X5 Jump Starter with Air Compressor, Epower-325, X5 Jump Starter with Air Compressor, Starter with Air Compressor, Air Compressor, Compressor
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>