Schallen 16 Electric Oscillating Floor Standing Tall Pedestal Air Cooling Fan Instruction Manual
- June 14, 2024
- Schallen
Table of Contents
16” Pedestal Fan
INSTRUCTION MANUAL
16 Electric Oscillating Floor Standing Tall Pedestal Air Cooling Fan
Please retain forfuture reference
Thank you for purchasing this 16” Pedestal Fan. We recommend that you spend
some time reading these instructions in order to fully understand all the
operational features it offers.
WARNING:
Be sure to shut off the electric supply at the main switch or circuit breaker
before installation. The important safeguards and instructions appearing in
this manual are not meant to cover all possible conditions and situations that
may occur. It must be understood that common sense, caution and care are
factors which cannot be built into any product. These factors must be supplied
by the person (s) caring for and operating the unit.
No responsibility will be accepted for any damage which may occur during
transport or by improper installation or voltage fluctuation or if any portion
of the product has been altered or modified.
Caution:
- Improper installation may result in the risk of fire, electric shock, or injury to persons.
- To prevent the risk of fire and electric shock, do not use the unit near windows.
- Power plug must be removed from the power socket before cleaning, servicing, maintenance, and when moving from one location to another.
- The fan should be placed on a flat and stable surface when operating to avoid overturning.
- The fan should not be placed in a damp place or where humidity is high (such as in a bathroom).
ASSEMBLY
- Secure the lower pipe with pipe support to the hub of Cross Bass with the screw provided.
- Extend the upper pipe, insert the pipe connector through the upper pipe onto the lower pipe, and tighten.
- Attach the motor with the switch compartment onto the upper pipe. Ensure the switch compartment is pushed fully onto the upper pipe and secured with the screw provided.
- Loosen Guard Mounting Nut from the Motor Housing.
- Position the Back Guard firmly to Motor Housing and then fasten it byturning Guard Mounting Nut clockwise tightly.
- Push the Blade along Motor Shaft. Fasten it firmly with Spinner by turning it counter-clockwise.
- Hang the Front Guard to Back Guard with the position fixer provided at the rim of the Guard, and then fix them together with the clips provided.
Oscillation Control
- Push the oscillation knob to oscillate.
- Pull the oscillation knob to stop.
PARTS DESCRIPTION
- FRONT GUARD
- FAN BLADE
- GUARD MOUNTING NUT
- BACK GUARD
- MOTOR SHAFT
- MOTOR HOUSING
- OSCILLATION KNOB
- SWITCHES
- SWITCH COMPARTMENT
- LOCK SPRAIN
- UPPER PIPE
- PIPE CONNECTOR
- LOWER PIPE
- CROSS BASS
Imported By:
NETAGON LTD
Unit 4, Chandlers Court, Picow Farm Road,
Runcorn, Cheshire, WA7 4UH
Documents / Resources
|
Schallen 16 Electric Oscillating Floor Standing Tall Pedestal Air Cooling
Fan
[pdf] Instruction Manual
16 Electric Oscillating Floor Standing Tall Pedestal Air Cooling Fan, 16
Electric, Oscillating Floor Standing Tall Pedestal Air Cooling Fan, Floor
Standing Tall Pedestal Air Cooling Fan, Standing Tall Pedestal Air Cooling
Fan, Pedestal Air Cooling Fan, Air Cooling Fan, Cooling Fan, Fan
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>