Toiauaha 535759127 Digital Camera AutoFocus 4K 56MP UHD Vlogging Camera Instruction Manual

Toiauaha 535759127 Digital Camera AutoFocus 4K 56MP UHD Vlogging Camera Instruction Manual

Preface

Thank you for purchasing this digital camera. Please read this manual before operating this product. After you finish reading this manual, store it in a safe place for future reference.

Contents covered in this user manual refer to the latest information in preparation of this user manual. Screen displays, illustrations, etc. adopted in this manual are intended to explain operation of the camera in detail. Due to differences in technology development and production batches, they may be slightly different from digital cameras you actually use.

Disclaimer notice: Considerable effort has been made to ensure that this manual isfree of inaccuracies and omissions. However, there is no guarantee that there will be no errors or omissions in this manual.

Safety Precautions:

1. Be sure to read, understand and follow the safety precautions below when using the camera. Please make sure that the way you operate the camera is correct.
2. Do not point the camera directly at the sun or other strong light sources, or your eyesight may be damaged.
3. Do not trigger the flash in close to human or animal eyes. Your eyesight may be damaged when facing a strong light source if the distance is too close. Please pay special attention to keep more than 1 meter (39 inches) away from  baby.
4. Please store this equipment out of the reach of children and infants. It can cause serious injury to children if the camera or battery is accidentally damaged.
5. Do not attempt to disassemble or modify any part not described in this guide. Unpacking or modifying of camera may result in a high voltage shock. Internal inspection or warranty shall be the responsibility of qualified service personnel designated by company or corresponding camera dealer.
6. Please stop operating camera immediately if there are smoke or unpleasant smell on any parts of camera, otherwise it may cause fire or electric shock. Turn off camera Immediately and remove camera’s battery or unplug power cord from electrical outlet. Make sure the camera has stopped emitting smoke or unpleasant smell.
7. Please stop operating camera immediately if you accidentally drop camera to the ground or damage its casing. otherwise it may cause fire or electric shock. Turn off camera immediately and remove camera’s battery or unplug power cord from electrical outlet.
8. Do not expose or immerse the camera to water or other liquids. This camera is not waterproof. Please dry with a soft cloth if the case is exposed to liquid or salt water. Turn off camera immediately and remove camera’s battery or unplug power cord from electrical outlet if water or other materials immerse into the camera.
9. Do not store this equipment out of damp or dusty place
10. Your hands may feel hot because temperature of camera body will rise after a long time of us. Please be careful when operating this equipment for a long time.
11. Please unplug the battery if you not use the camera. The battery shall be charged once every 6 months. Use the camera again to discharge the battery when it is fully charged, so that life of the camera and battery can be maintained.

Part Name

1. Power
2. Shoot button
3. Speaker
4. Hot-shoe
5. Mode button

Parts

1. Lens
2. Flash

Parts

1. Hot-shoe
2. Charging Indicator
3. working Indicator
4. T-Zoom in
5. W- Zoom out
6. Up / Flash light
7. Right / Continuous shooting
8. OK
9. Down / Delete 10: Menu
10. Display
11. Left / Delay 13: LCD display

Parts

1. Battery door
2. Tripod slot
3. Memory slot

Parts

1. MIC interface
2. US Binterface
3. HDMI interface

Preparation of the Camera

Install battery

This camera uses high capacity rechargeable external lithium battery. Please put the battery into the battery slot correctly according to the battery and battery compartment slot.

Battery charging

The following symbols indicate the current remaining battery power.

When the battery logo is red, it means the battery needs to be charged. Please charge it in time, otherwise it may shut down automatically due to low battery.

1. When charging with this camera, use USB line to connect the power adapter and the camera, and then connect the power supply to charge. When charging, the red light is always on, and the red light is off after fully charged.
   Tips: The camera will turn on automatically when charging. The battery will be fully charged faster when charged in the off state.

2. When charging with standard external charger, put the battery into the charger directly.

3. Battery charging time (estimated) In the normal environment, it takes 3 hours to be fully charged.

4. Continuous working hours (estimated) When [system] is set to photo mode and all other settings are factory default settings, it can work for 1.5 hours. When [system] is set to video mode and other resolutions, and all other settings are factory default settings, it can work for 1.5 hours.

Note: The battery is recommended to start charging in a temperature range of 10°C to 30° C. In a lower temperature, the battery may not be able to or need more time to be fully charged. When charging in a high temperature, it may shorten battery life.

The fully charged battery will naturally consume electricity. In order to ensure sufficient power, charging in advance is recommended.

When the camera is not used for a long time, please charge the battery every 3 months. Then let the battery discharge to maintain the battery life.

Install/remove memory card
The camera supports Micro SD card, must use class 10 card, the highest support 256GB.
insert Micro SD card with label up into card slot at bottom of the camera until it clicks to confirm that the installation is in place. Press memory card will pop up automatically if press it inward again.

Notes:

• Turn off power of the camera before replacing memory card.
• Insert card in the correct direction. Do not use too much force when inserting card to avoid damaging card or camera parts. Please check if the direction is correct if card can’t insert.
• lease format memory card first if it is used for the first time, or has been used on other cameras

The estimated recording time is just for reference and the specific time may be different depending on the memory card and battery condition.

| 4K| 2.7K| 1080P| 720P
---|---|---|---|---
| 30FPS| 30FPS| 60FPS| 30FPS| 120FPS| 60FPS| 30FPS
16G| 45| 80| 80| 160| 80| 160| 160
32G| 90| 170| 170| 300| 170| 300| 300
64G| 180| 350| 350| 620| 350| 620| 620
128G| 360| 720| 720| 1320| 720| 1320| 1320
256G| 720| 1440| 1440| 2640| 1440| 2640| 2640

Note: If there is documents not recordedbythiscameraor saved by PC in the memory card, the recordingtimemaybereduced or data may be unable to recordedproperly.

Format memory card
A memory card first used in this camera is recommended to be formatted, or failure, such as, inability to record may occur.

When first using a memory card in this camera, the format window will pop up automatically. As shown in the figure:

You can also enter the system menu of this camera sub-menu”format”, press OK button, enter the format window in the above figure to carry out formatting. You can also format the memory card on your computer.

Turn on the power
Press power button, working indicator lights up, screen lights up, and the camera is turned on.

Set date/time
Press “MENU” twice to enter system setting menu, press Down button to find the “Time Set / Date Set” sub-menu, press “OK” to set corresponding date and time.

Language setting
Enter system setting, press the Down button to find the “Language” sub-menu, press “OK” to select the appropriate language.

Submenu catalog of system setting

sian/German/French/Italian/Spanish/Portuguese/Thai
Time Format| YYYY/MM/DD
MM/DD/YYYYDD/MM/YYYY
Time Set| hour minute   second
Date Set| Year   month         day
Format| (Micro SD Card)Format/Cancel
Device Info| Product model and version number
Factory Reset| Confirm/Cancel

Mode Dial

Rotate the mode dial button to select the corresponding mode. The corresponding reference of the mode is as follows:

Take pictures
Set the mode dial to camera mode, the camera screen will display the following interface.

1. Photo mode
2. Image pixels
3. Image quality
4. Fill light (turn off)
5. Current stored quantity
6. Current memory remaining storage
7. Current remaining battery power
8. Zoom in/Zoom out
9. Zoom factor
10. Playback
11. System time
12. System date
13. Exposure
14. ISO
15. Exposure Metering
16. Scene
17. White balance
18. Setting

Menu setting contents in photo mode

Shooting auto focus function (AF)
In the photographing mode, the shoot button has two layers. Gently press the first layer to focus, then press the second layer to take a picture. Gently press the first layer of the shoot button, and the focusing logo frame will appear on the display until the camera has focused clearly. Then press the second layer of the shoot button to take the best clear picture (normal focusing range >0.33ft).

In video mode, the shoot button also has two layers. Gently press the first layer to focus, then press the second layer to shoot

1. When the distance between the camera and the object is more than 3.3ft, gently press the first layer of the shoot button, and the focus logo frame will appear on the display until the camera has focused clearly. Then the second layer of shoot button to capture the best clear video (the focus range is > 3.3ft);
2. When the distance between the camera and the object is more than 0.33ft and less than 3.3ft, gently press the first layer of the shoot button, and the focusing logo frame will appear on the display until the camera has focused clearly , then press the second layer of shoot button to start recording
   (Note: gently press the first layer of the shoot button and don’t release your finger at this time) , and shoot the best clear video(the focusing range: 0.33ft to 3.3ft)

Recording video

1. Recording mode
2. video resolution
3. Fill light
4. Current recorded time
5. Current memory card remaining recording time
6. Current remaining battery power
7. Zoom in/Zoom out
8. Zoom factor
9. Playback
10. system time
11. system date
12. Exposure
13. ISO
14. Exposure Metering
15. Scene
16. White balance
17. Setting
18. MIC

Menu setting contents in video mode (In this mode, press MENU directly to set the corresponding menu)

Video pause
This camera supports video pause. During the recording, press the camera key, the recording is stopped and press the camera key again, the recording is continued. If pressing the record key again, the recording will end.
Tips: The recorded long video will be saved in the memory card in sections, and thedocument name is 0000—0000X.

PlayBack mode
Turn the mode dial to playback mode, and then press the Left or Right button to view the photos or videos. Press the down button to choose whether to delete the current photo or video.

Power OFF
Long press POWER button to turn off the digital camera. If you set the auto turn off menu, when the digital camera is free ,it will turn off automatically without operation in more than 3 min/5min/10min, so to save power.

Fill light
It can be used to fill light in a dark environment. Press the “up” button to quickly set to turn off fill light or turn on fill light. In the photo mode, press the “up ” button to quickly set the following three corresponding flash modes.

| No flash
---|---
| Auto flash
| Forced flash

In the recording mode, press the “up ” button to quickly set two flash modes:no flash and forced flash.

MIC input
When an external microphone is needed, plug the external microphone into the MIC interface of video camera to record video or audio for better audio effects.

HD Out put

When the video and sound of the video camera are needed to output to the HD TV, insert the public port of the HD cable into the HD interface of the video camera, and connect the HD input port to the HD input interface of the HDTV. Please stop recording / playing videos before accessing / unplugging the HD cable. (switch TV signal into HD mode)

Connect computer and webcam
Connect the camera to the available USB port on the computer with the USB cable. After inserting the USB cable, the camera will automatically turn on. Press the up and down button to select the charging mode, storage mode or webcam mode, and press the OK to enter.

1. Select charging mode, all functions of the camera can be used normally. The camera supports recording while charging.
2. When the storage mode is selected, a new removable storage device will be added in the “My Computer” window, which will transfer photos and video files to the computer.

Note: do not disconnect the USB connection when downloading the file. Do not plug and unplug the memory card when connecting the USB, so as to avoid data loss.

3. Select webcam mode, the camera can be used as a camera.
   Tip: if the camera cannot be enabled after connection, please go to the device manager of the computer, find the image device menu or camera menu, and click to check whether there is a UVC Camera device, if it is already connected. If it is a laptop with its own webcam, you need to disable its own webcam. Only then can the camera be used as a webcam.

replace it with a new one.
The battery is not installed in place; please confirm that the battery is installed correctly.
There may be an error in the camera program, please pull out the battery, reinstall, and then turn on.
Unable to charge| If the charging indicator light is flashing, the battery is not installed in place or in poor contact. Please reinstall the battery until the indicator light is on for a long time (the indicator light will go out when the battery is full).
If the charging indicator is not on, the charger is not plugged in. Please check whether the charger is connected normally.
HD cable cannot connect to the TV| Check whether the TV source is set to HD mode.
Check if the HD wire is connected correctly.

Camera cleaning and maintenance

1. If you do not use the camera for a long time, take out the camera battery and place it in a dust-free, dry environment with a temperature no higher than 30 ℃.
2. In order to extend the service life of the battery, please discharge it completely before storage.
3. Please fully discharge the battery at least once every 3 months after it has been fully charged.
4. If there is dust or dirt on the lens or screen, gently wipe it with a clean, soft lens cleaning cloth.
5. As this machine is a precision instrument, please do not drop it or suffer from strong impact or vibration.

Additional notes

1. Do not insert any object into the slot except the memory card.
2. After the power is turned on, the camera may show an unstable image about for a few seconds, but this is not a fault.
3. Due to the optical properties of the lens, there may be color dispersion (magnification of chromatic aberration) at the edges of the image. This is not a camera fault.
4. It is normal for the memory card to get hot after a long period of use.
5. It is normal for the camera’s screen to heat up after a long period of use.
6. The camera has no auto focus function, and the best distance for shooting is more than 2 meters.

Specifications

No optical zoom
AF| Support(Normal auto focus Range of >10cm)
Photo sensibility| Auto/IOS100/ISO200/ISO400/ISO800/ ISO1600/ISO3200/ISO6400
**** Static Image| Format:JPGPhoto Resolution:3M,5M,8M,12M,20M, 24M,30M,48M
Video Resolution| Format:MP4 Video Resolution:4K_3840X2160 (30FPS)2.7K_2688X1520(30FPS) FHD_1920X1080(60FPS) FHD_1920X1080(30FPS) HD_1280x720 (120/60/30FPS)
External MIC| Support
Fill Light| ＜1.0m Range
White balance| Auto / sunny / cloudy / incandescent / fluorescent
Exposure| –3.0EV～+3.0EV
USB Interface| USB2.0（high speed）
Auto Power -Off| Off /3mins /5mins /10mins
LCD Screen| 3.0-inch ultra HD screen（16:9）
High-Definition Multimedia Interface| HDMI output interface
Language| English (default), Spanish, Portuguese, Russian, simplified Chinese, traditional Chinese, German, Italian, French, Japanese, Korean, Thai
Power Supply| lithium-ion battery
Compatible System| PC：Windows XP/Windows7/Windows8/Windows10/MAC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>